Peridynamic simulation of brittle-ice crushed by a vertical structure
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Sea ice is the main factor affecting the safety of the Arctic engineering. However, traditional numerical methods derived from classical continuum mechanics have difficulties in resolving discontinuous problems like ice damage. In this paper, a non-local, meshfree numerical method called “peridynamics”, which is based on integral form, was applied to simulate the interaction between level ice and a cylindrical, vertical, rigid structure at different velocities. Ice in the simulation was freshwater ice and simplified as elastic-brittle material with a linear elastic constitutive model and critical equivalent strain criterion for material failure in state-based peridynamics. The ice forces obtained from peridynamic simulation are in the same order as experimental data. Numerical visualization shows advantages of applying peridynamics on ice damage. To study the repetitive nature of ice force, damage zone lengths of crushing failure were computed and conclude that damage zone lengths are 0.15e0.2 times as ice thickness.
Abstract
Sea ice is the main factor affecting the safety of the Arctic engineering. However, traditional numerical methods derived from classical continuum mechanics have difficulties in resolving discontinuous problems like ice damage. In this paper, a non-local, meshfree numerical method called “peridynamics”, which is based on integral form, was applied to simulate the interaction between level ice and a cylindrical, vertical, rigid structure at different velocities. Ice in the simulation was freshwater ice and simplified as elastic-brittle material with a linear elastic constitutive model and critical equivalent strain criterion for material failure in state-based peridynamics. The ice forces obtained from peridynamic simulation are in the same order as experimental data. Numerical visualization shows advantages of applying peridynamics on ice damage. To study the repetitive nature of ice force, damage zone lengths of crushing failure were computed and conclude that damage zone lengths are 0.15e0.2 times as ice thickness.
참고문헌 (19)
- , 2010, pp.10(1), 012102~[DOI]
- Brbaru, F., "Convergence, adaptive refinement, and scaling in 1D peridynamic", Int. J. Numer. Methods Eng, 77(6), pp.852~877 (2009)
- Foster, J. T., "Viscoplasticity using peridynamics", Int. J. Numer. Methods Eng, 81(10), pp.1242~1258 (2010)
- Huang, Y., "Model test study of the interaction between ice and a compliant vertical narrow structure", Cold Reg. Sci. Technol, 49(2), pp.151~160 (2007)
- Jones, S. J., "The confined compressive strength of polycrystalline ice", J. Glaciol, 28, pp.171~177 (1982)
- Jordaan, I., "J. Mechanics of iceestructure interaction", Eng. Fract. Mech, 68(17), pp.1923~1960 (2001)
- Kamio, Z., "Statistical analysis of ice fracture characteristics", Eng. Fract. Mech, 70(15), pp.2075~2088 (2003)
- Kuehn, G. A., "The compressive strength of ice cubes of different sizes", J. Offshore Mech. Arct. Eng, 115(2), pp.142~148 (1993)
- Madenci, E., "Peridynamic Theory and its Applications" (2014), Springer
- Schulson, E. M., "Brittle failure of ice", Eng. Fract. Mech, 68(17), pp.1839~1887 (2001)
- Schulson, E. M., "The brittle failure of ice under compression", J. Phys. Chem. B, 101(32), pp.6254~6258 (1997)
- Silling, S. A., "Reformulation of elasticity theory for discontinuities and long-range forces", J. Mech. Phys. Solids, 48(1), pp.175~209 (2000)
- Silling, S. A., "A meshfree method based on the peridynamic model of solid mechanics", Comput. Struct, 83(17), pp.1526~1535 (2005)
- Silling, S. A., "Peridynamic states and constitutive modeling", J. Elast, 88(2), pp.151~184 (2007)
- Sodhi, D. S., "Ice Forces on Rigid, Vertical, Cylindrical Structures", Cold Regions Research and Engineering Lab, ~ (1984)
- Sodhi, D. S., "Characteristic frequency of force variations in continuous crushing of sheet ice against rigid cylindrical structures", Cold Reg. Sci. Technol, 12(1), pp.1~12 (1986)
- Warren, T. L., "A non-ordinary state-based peridynamic method to model solid material deformation and fracture", Int. J. Solids Struct, 46(5), pp.1186~1195 (2009)
- Tian, , Y., "The dynamic ice loads on conical structures", Ocean Eng, 59, pp.37~46 (2013)
- Yue, Q., "Dynamic ice forces of slender vertical structures due to ice crushing", Cold Reg. Sci. Technol, 56(2-3), pp.77~83 (2009)