A study on temporal accuracy of OpenFOAM
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
CrankeNicolson scheme in native OpenFOAM source libraries was not able to provide 2nd order temporal accuracy of velocity and pressure since the volume flux of convective nonlinear terms was 1st accurate in time. In the present study the simplest way of getting the volume flux with 2nd order accuracy was proposed by using old fluxes. A possible numerical instability originated from an explicit estimation of volume fluxes could be handled by introducing a weighting factor which was determined by observing the ratio of the finally corrected volume flux to the intermediate volume flux at the previous step. The new calculation of volume fluxes was able to provide temporally accurate velocity and pressure with 2nd order. The improvement of temporal accuracy was validated by performing numerical simulations of 2D TayloreGreen vortex of which an exact solution was known and 2D vortex shedding from a circular cylinder.
Abstract
CrankeNicolson scheme in native OpenFOAM source libraries was not able to provide 2nd order temporal accuracy of velocity and pressure since the volume flux of convective nonlinear terms was 1st accurate in time. In the present study the simplest way of getting the volume flux with 2nd order accuracy was proposed by using old fluxes. A possible numerical instability originated from an explicit estimation of volume fluxes could be handled by introducing a weighting factor which was determined by observing the ratio of the finally corrected volume flux to the intermediate volume flux at the previous step. The new calculation of volume fluxes was able to provide temporally accurate velocity and pressure with 2nd order. The improvement of temporal accuracy was validated by performing numerical simulations of 2D TayloreGreen vortex of which an exact solution was known and 2D vortex shedding from a circular cylinder.
참고문헌 (11)
- Cao, S., "Mechanism of the lift force on the circular and square cylinders in shear flows", 5th International Symposium on Computational Wind Engineering (2010)
- Kim, K., "An implicit velocity decoupling procedure for the incompressible NaviereStokes equations", Int. J. Numer. Methods Fluids, 38, pp.125~138 (2002)
- 이희범, "A dynamic interface compression method for VOF simulations of high-speed planing watercraft", Journal of Mechanical Science and Technology, 29(5), pp.1849~1857 (2015), 대한기계학회
- Lee, S. B., "Application of OpenFOAM to prediction of hull resistance", 9th International OpenFOAM Workshop (2014)
- Leonard, B. P., "A stable and accurate convective modelling procedure based on quadratic upstream interpolation", Comput. Methods Appl. Mech. Eng, 19(1), pp.59~98 (1979)
- "OpenFOAM User Guide by OpenFOAM Foundation Ltd"[URL]
- Park, S., "Computational analysis of turbulent supercavitating flow around a two-dimensional wedge-shaped cavitator geometry", Comput. Fluids, 70, pp.73~85 (2012)
- Park, S., "Numerical analysis of the three-dimensional cloud cavitating flow around a twisted hydrofoil", Fluid Dyn. Res, 45, pp.1~20 (2013)
- Rajani, B. N., "Numerical simulation of laminar flow past a circular cylinder", Appl. Math. Model, 33, pp.1228~1247 (2009)
- van Leer, B., "Towards the ultimate conservative difference scheme, V. A second order sequel to Godunov's method", J. Comput. Phys, 32, pp.101~136 (1979)
- Williamson, C. H. K., "Oblique and parallel modes of vortex shedding in the wake of a circular cylinder at low Reynolds numbers", J. Fluid Mech, 206, pp.579~627 (1989)