Analysis of the dynamic characteristics for the change of design parameters of an underwater vehicle using sensitivity analysis
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
In order to design the hull form of an underwater vehicle in the conceptual design phase, the dynamic characteristics depending on the hull form parameters should be identified. Course-keeping stability, turning ability, yaw-checking ability, and mission competence are set to be the indices of the dynamic characteristics, and the geometric parameters for the bare hull and rudder are set to be the hull form design parameters. The total sensitivity of the dynamic characteristics with respect to the hull form parameters is calculated by the chain rule of the partial sensitivity of the dynamic characteristics with respect to the hydrodynamic coefficients, and the partial sensitivity of the hydrodynamic coefficients with respect to the hull form parameters. Based on the sensitivity analysis, important hull form parameters are selected, and those optimal values to satisfy the required intercept time of mission competence of a specific underwater vehicle and turning rate are estimated.
Abstract
In order to design the hull form of an underwater vehicle in the conceptual design phase, the dynamic characteristics depending on the hull form parameters should be identified. Course-keeping stability, turning ability, yaw-checking ability, and mission competence are set to be the indices of the dynamic characteristics, and the geometric parameters for the bare hull and rudder are set to be the hull form design parameters. The total sensitivity of the dynamic characteristics with respect to the hull form parameters is calculated by the chain rule of the partial sensitivity of the dynamic characteristics with respect to the hydrodynamic coefficients, and the partial sensitivity of the hydrodynamic coefficients with respect to the hull form parameters. Based on the sensitivity analysis, important hull form parameters are selected, and those optimal values to satisfy the required intercept time of mission competence of a specific underwater vehicle and turning rate are estimated.
참고문헌 (22)
- Ahn, J.H., "Study on the Collision Avoidance of a Ship Using Neuro-fuzzy Technique", pp.2005
- 배준영, "Manta형 무인잠수정의 동안정성 향상을 위한 부가물의 설계 변경에 관한 연구", 대한조선학회 논문집, 44(3), pp.323~331 (2007), 대한조선학회
- Feldman, J., "DTNSRDC Revised Standard Submarine Equations of Motion. DTNSRDC", SPD-0393-09, 1979, pp.4~27
- Fossen, T.I., "Guidance and Control of Ocean Vehicles", pp.5~56 (1994), JOHN WILEY & SONS
- Gertler, M., "Standard Equations of Motion for Submarine Simulation. DTNSRDC", SR 009 01 01, 1967, pp.4~11
- Course 14. Manoeuvrability of Submarines. Howaldts werke-Deutsche Werft AG Report, "HDW", ~ (2002)
- Healey, A.J., "Multivariable sliding mode control for autonomous diving and steering of unmanned underwater vehicles", IEEE J. Ocean. Eng., 18(3), pp.327~339 (1993)[DOI]
- Jeon, M., "A Study on the Maneuvering Characteristics of Submerged Body by the Change of its Design Parameters", Spring Workshop of the Korea Marine Robot Technology Society, pp.35~41 (2016)
- Jeon, M., "Hull Optimization for a Submerged Body Using Sensitivity Analysis on its Dynamic Characteristics", pp.2017
- 정진우, "VPMM 시험을 이용한 잠수함 모형의 유체력 미계수 추정", 한국항해항만학회지, 38(2), pp.97~103 (2014), 한국항해항만학회[DOI]
- 정진우, "VPMM 시험을 통한 무인 수중 글라이더 모형의 동유체력 계수 추정에 관한 연구", 한국해양공학회지, 28(2), pp.119~125 (2014), 한국해양공학회
- Kim, C.K., "The trend of the development for the underwater vehicle and its technology", 2011 Joint Symposium of the Korean Association of Ocean Science and Technology Societies, pp.469~469 (2011)
- 김대혁, "민감도 해석을 통한 선체 부가물이 함정의 조종성능에 미치는 영향 분석", 대한조선학회 논문집, 51(2), pp.154~161 (2014), 대한조선학회
- Tests of a Submarine Model in Coning Motion. Davidson Laboratory Report 2660, "Lewandowski, E.", ~ (1991)
- Lewis, E.V., "Principles of Naval Architecture, Volume III e Motions in Waves and Controllability", pp.222~224 (1989)
- Myring, D.F., "A theoretical study of body drag in subcritical axisymmetric flow", Aeronaut. Q, 27(3), pp.186~194 (1976)[DOI]
- 박종용, "몰수체의 원추형시험에 관한 연구", 한국해양공학회지, 29(6), pp.436~444 (2015), 한국해양공학회
- Prestero, T., "Verification of a Six-degree of Freedom Simulation Model for the REMUS Autonomous Underwater Vehicle", pp.2001
- Sen, D., "A study on sensitivity of maneuverability performance on the hydrodynamic coefficients for submerged bodies", J. Ship Res., 44(3), pp.186~196 (2000)
- 여동진, "잠수함의 설계 인자들에 대해 안정성 지수가 가지는 민감도 해석", 대한조선학회 논문집, 43(4), pp.521~528 (2006), 대한조선학회
- 여동진, "유전 알고리즘을 이용한 수중운동체 조종성미계수의 민감도 최대화 입력 설계", 대한조선학회 논문집, 43(2), pp.156~163 (2006), 대한조선학회
- Yoon, H.K., "Establishment of hydrodynamic force and moment model by using system identification method and neural networks", International Conference on Marine Research and Transportation (2006)