Experimental studies of suppressing effectiveness on sloshing with two perforated floating plates
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In the present paper, model tests of suppressing sloshing fitted with two perforated floating plates are carried out. The study involves identification of system performance such as the suppression and the solidity ratio. Three different solidity ratios of perforated plates have been tried out as potential positive slosh damping devices. A series of painstaking experiments have been conducted in a rigid rectangular tank on six degrees of freedom motion platform under roll harmonic excitation. Comparison of the clean tank shows that the three types of perforated plates are all effective on damping the run-up and impact pressure along the bulkhead. The parametric study indicates that the perforated plate with the median solidity ratio is the most optimal one in suppressing sloshing among three configurations.
Abstract
In the present paper, model tests of suppressing sloshing fitted with two perforated floating plates are carried out. The study involves identification of system performance such as the suppression and the solidity ratio. Three different solidity ratios of perforated plates have been tried out as potential positive slosh damping devices. A series of painstaking experiments have been conducted in a rigid rectangular tank on six degrees of freedom motion platform under roll harmonic excitation. Comparison of the clean tank shows that the three types of perforated plates are all effective on damping the run-up and impact pressure along the bulkhead. The parametric study indicates that the perforated plate with the median solidity ratio is the most optimal one in suppressing sloshing among three configurations.
참고문헌 (23)
- Akyildiz, H., "Experimental investigation of pressure distribution on a rectangular tank due to the liquid sloshing", Ocean Eng, 32, pp.1503~1516 (2005)
- Akyildiz, H., "Sloshing in a three-dimensional rectangular tank : numerical simulation and experimental validation", Ocean Eng, 33, pp.2135~2149 (2006)
- Akyildiz, H., "An experimental investigation of the effects of the ring baffles on liquid sloshing in a rigid cylindrical tank", Ocean Eng, 59, pp.190~197 (2013)
- Anai, Y., "Development of a new reduction device of sloshing load in tank", Proceedings of the 20th International Offshore and Polar Engineering Conference (2010)
- Arai, M., "Performance study of an antisloshing floating device for membrane-type LNG tanks", Proceedings of the 15th International Congress of the International Maritime Association of the Mediterranean (2013)
- Bulian, G., "Experimental sloshing pressure impacts in ensemble domain : transient and stationary statistical characteristics", Phys. Fluids, 26(3), pp.032102~ (2014)
- Faltisen, O. M., "Steady-state liquid sloshing in a tectangular tank with a slat-type screen in the middle : quasilinear modal analysis and experiments", Phys. Fluids, 23, pp.042101~ (2011)
- Firoozkoohi, R., "Investigation of finite water depth sloshing in a tank in presence of slat screens using model test and CFD", Proceedings of the 25th International Offshore and Polar Engineering Conference (2015)
- Goudarzi, M. A., "Numerical evaluation of hydrodynamic damping due to the upper mounted baffles in real scale tanks", Soil Dynam. Earthq. Eng, 77, pp.290~298 (2015)
- Goudarzi, M. A., "Analytical and experimental evaluation on the effectiveness of upper mounted baffles with respect to commonly used baffles", Ocean Eng, 42, pp.205~217 (2012)
- Jiang, M., "Laboratory investigation of the hydroelastic effect on liquid sloshing in rectangular tanks", J. Hydrodyn, 26(5), pp.751~761 (2014)
- Jin, H., "Experimental study on sloshing in a tank with an inner horizontal perforated plate", Ocean Eng, 82, pp.75~84 (2014)
- Jung, J. H., "Effect of the vertical baffle height on the liquid sloshing in a three-dimensional rectangular tank", Ocean Eng, 44, pp.79~89 (2012)
- Kim, Y., "Model-Scale sloshing tests for an anti-sloshing floating blanket system", Proceedings of the 21th International Offshore and Polar Engineering Conference (2011)
- Kobayashi, N., "Suppression characteristics of sloshing in vessels by a bulkhead", Proceedings of the ASME 2006 Pressure Vessels and Piping Conference (2006)
- Koh, C. G., "Modelling of liquid sloshing with constrained floating baffle", Comput. Struct, 122, pp.270~279 (2013)
- Molin, B., "Experimental and numerical study of the sloshing motion in a rectangular tank with a perforated screen", J. Fluid Struct, 43, pp.463~480 (2013)
- Molin, B., "Inertia effects in TLD sloshing with perforated screens", J. Fluid Struct, 59, pp.165~177 (2015)
- Onuma, R., "Suppression of residual sloshing in a liquid transport container by a bulkhead", Journal of System Design and Dynamics, 2(1), pp.286~298 (2008)
- Panigrahy, P. K., "Experimental studies on sloshing behavior due to horizontal movement of liquids in baffled tanks", Ocean Eng, 36, pp.213~222 (2009)
- Sauret, A., "Damping of liquid sloshing by foams", Phys. Fluids, 27(2), pp.022103~ (2015)
- Souto-Iglesias, A., "A set of canonical problems in sloshing. Part 2 : influence of tank width on impact pressure statistics in regular forced angular motion", Ocean Eng, 105, pp.136~159 (2015)
- Wei, Z., "Sloshing-induced slamming in screen-equipped rectangular tanks in shallow-water conditions", Phys. Fluids, 27(3), pp.032104~ (2015)