만곡 근관에서 삼각 혹은 장방형 단면 구조의 니켈-티타늄 파일 응력 분포에 관한 3차원 유한요소 연구
STRESS DISTRIBUTION FOR NITI FILES OF TRIANGULAR BASED AND RECTANGULAR BASED CROSS-SECTIONS USING 3-DIMENSIONAL FINITE ELEMENT ANALYSIS
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
이 연구의 목적은 3차원 유한요소 모형 분석을 이용하여 삼각 대칭형과 S형태의 단면 및 변형된 사각 형태인 장방형 단면으로 분류되는 네 종류의 니켈티타늄 파일이 만곡 근관 적용 시의 응력 분포를 비교하는 것이다. 삼각 대칭형 단면 구조의 ProFile #30 / .06과 HeroShaper #30 / .06, 장방형 단면구조의 Mtwo #30 / .05와 NRT #30 / .06 파일을 마이크로컴퓨터 단층촬영을 하고 reverse engineering을 통하여 파일의 구조를 얻고 삼차원 유한요소모형을 제작하였다. 모형 근관 내에서 파일이 근관장 끝까지 진입하여 회전할 때 발생하는 von Mises 응력 분포 및 파일의 제거후의 잔류 응력의 분포양상을 ABAQUS 프로그램을 이용하여 비교하였다. 근관 내 회전 시에 발생하는 응력을 관찰하였을 때 NRT 파일에서 가장 큰 응력을 나타냈으며, 각 파일에서의 최고 응력과 최저 응력을 비교하였을 때 Mtwo파일에서 가장 큰 차이가 나타났다. 응력의 내부 분포 경향을 보았을 때 장방형 구조의 단면을 가진 Mtwo 및 NRT 파일에서 불연속적인 응력의 집중 부위가 관찰되었으며, 근관 외부로 파일을 제거하여 탄성 회복이 일어난 후의 잔류 응력도 NRT 파일에서 가장 높게 나타났다. 이상의 결과로 유추할 때, 삼각대칭 단면 구조를 가진 파일보다 S-형태의 단면과 변형된 사각 형태의 단면 등의 장방형 단면 구조의 파일이 파절의 위험성이 더 클 것으로 사료된다.
Abstract
The purpose of this study was to compare the stress distributions of NiTi rotary instruments based on their cross-sectional geometries of triangular shape-based cross-sectional design, S-shaped cross-sectional design and modified rectangular shape-based one using 3D FE models. NiTi rotary files of S-shaped and modified rectangular design of cross-section such as Mtwo or NRT showed larger stress change while file rotation during simulated shaping. The stress of files with rectangular cross-section design such as Mtwo, NRT was distributed as an intermittent pattern along the long axis of file. On the other hand, the stress of files with triangular cross-section design was distributed continuously. When the residual stresses which could increase the risk of file fatigue fracture were analyzed after their withdrawal, the NRT and Mtwo model also presented higher residual stresses. From this result, it can be inferred that S-shaped and modified rectangular shape-based files were more susceptible to file fracture than the files having triangular shape-based one.
참고문헌 (32)
- Sattapan B, "Defects in rotary nickel-titanium files after clinical use", J Endod, 26(3), pp.161~165 (2000)
- Peters OA, "Current challenges and concepts in the preparation of root canal systems: a review", J Endod, 30(8), pp.559~567 (2004)
- Averbach RE, "Endodontics in the 21st century: the rotary revolution", Compend Contin Educ Dent, 22(1), pp.27~34 (2001)
- Yao JH, "Cyclic fatigue of three types of rotary nickel-titanium files in a dynamic model", J Endod, 32(1), pp.55~57 (2006)
- Pruett JP, "Cyclic fatigue testing of nickel titanium endodontic instruments", J Endod, 23(2), pp.77~85 (1997)
- Turpin YL, "Impact of two theoretical cross-sections on torsional and bending stresses of nickel-titanium root canal instrument models", J Endod, 26(7), pp.414~417 (2000)
- Camps JJ, "Relationship between file size and stiffness of nickel titanium instruments", Endod Dent Traumatol, 11(6), pp.270~273 (1995)
- Camps JJ, "Relationship between file size and stiffness of stainless steel instruments", Endod Dent Traumatol, 10(6), pp.260~263 (1994)
- Kazemi RB, "A comparison of stainless steel and nickel-titanium H-type instruments of identical design: torsional and bending tests", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 90(4), pp.500~506 (2000)
- 1Sch¨afer E, "Relationship between design features of endodontic instruments and their properties. Part 3. Resistance to bending and fracture", J Endod, 27(4), pp.299~303 (2001)
- Grande NM, "Malagnino VA, Somma F. Cyclic fatigue resistance and threedimensional analysis of instruments from two nickeltitanium rotary systems", Int Endod J, 39(10), pp.755~763 (2006)
- Shen Y, "Analysis of defects in ProTaper hand-operated instruments after clinical use", J Endod, 33(3), pp.287~290 (2007)
- Lopes HP, "Cyclic fatigue of ProTaper instruments", J Endod, 33(1), pp.55~57 (2007)
- Berutti E, "Comparative analysis of torsional and bending stresses in two mathematical models of nickel-titanium rotary instruments: ProTaper versus ProFile", J Endod, 29(1), pp.15~19 (2003)
- Xu X, "Comparative study of torsional and bending properties for six models of nickel- titanium root canal instruments with different crosssections", J Endod, 32(4), pp.372~375 (2006)
- Turpin YL, "Impact of two theoretical cross-sections on torsional and bending stresses of nickel-titanium root canal instrument models", J Endod, 26(7), pp.414~417 (2000)
- Wang GZ, "A finite element analysis of evolution of stress-strain and martensite transformation in front of a notch in shape memory alloy NiTi", Mater Sci Eng A, 460, pp.383~391 (2007)
- Walia H, "Gerstein H. An initial investigation of the bending and torsional properties of Nitinol root canal files", J Endod, 14(7), pp.346~351 (1988)
- Glosson CR, "A comparison of root canal preparations using Ni-Ti hand, Ni-Ti engine-driven, and K-Flex endodontic instruments", J Endod, 21(3), pp.146~151 (1995)
- Sch¨afer E, "Comparison of hand stainless steel and nickel titanium rotary instrumentation: a clinical study", J Endod, 30(6), pp.432~435 (2004)
- Chen JL, "A comparison of stainless steel hand and rotary nickel-titanium instrumentation using a silicone impression technique", Aust Dent J, 47(1), pp.12~20 (2002)
- Garip Y, "The use of computed tomography when comparing nickel-titanium and stainless steel files during preparation of simulated curved canals", Int Endod J, 34(6), pp.452~457 (2001)
- Fife D, "Cyclic fatigue testing of ProTaper NiTi rotary instruments after clinical use", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 97(2), pp.251~256 (2004)
- Schrader C, "Analysis of torque and force with differently tapered rotary endodontic instruments in vitro", J Endod, 31(2), pp.120~123 (2005)
- Sch¨afer E, "Roentgenographic investigation of frequency and degree of canal curvatures in human permanent teeth", J Endod, 28(3), pp.211~216 (2002)
- Martin B, "Factors influencing the fracture of nickel-titanium rotary instruments", Int Endod J, 36(4), pp.262~266 (2003)
- 이정규, "Fractographic 분석을 통한 HEROShaper 니켈티타늄 전동 파일의 피로파절에 미치는 표면결함의 역할", 대한치과보존학회지, 32(2), pp.130~137 (2007), 대한치과보존학회
- Sch¨ofer E, "Bending properties of rotary nickel-titanium instruments", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 96(6), pp.757~763 (2003)
- Kim HC, "Kang SI. Comparison of forces generated during root canal shaping and residual stresses of three nickel-titanium rotary files by using a three-dimensional finite-element analysis", J Endod, 34(6), pp.743~747 (2008)
- Hayashi Y, "Phase transformation behaviour and bending properties of hybrid nickel-titanium rotary endodontic instruments", Int Endod J, 40(4), pp.247~253 (2007)
- Kuhn G, "Influence of structure on nickel-titanium endodontic instruments failure", J Endod, 27(8), pp.516~520 (2001)
- Di Fiore PM, "A dozen ways to prevent nickel-titanium rotary instrument fracture", J Am Dent Assoc, 138(2), pp.196~201 (2007)