두꺼운 해빙에 대한 충격쇄빙 시 빙하중 신호 분석
An Analysis on Ice Load Signals Measured from Repetitive Ramming in Heavy Ice Condition
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
To navigate in ice-covered waters, the ice-breaking process is required. The ice-breaking mode depends on material properties of sea ice and ice conditions. The ice-breaking mode is classified into ramming and continuous ice-breaking. The ramming is effective on large ice features, such as thick ice ridge and icebergs, and the continuous ice-breaking is on level ice. In general, the impact time duration of crushing or bending on ice sheets is from 0.2 to 1.0 second. However, impact duration in ramming will be increased. The Korean ice-breaking research vessel ARAON conducted her research voyage in the Antarctic sea during the winter of 2012. The IBRV ARAON measured strain in ramming and continuous ice-breaking. Strain gauge signals were recorded during the planned ice-breaking performance and the unplanned ice transits in heavy ice conditions. The aim of this study is to investigate the ice load signals measured in ramming processes under the heavy ice condition. Based on the time history of the signals, a raising time, a half-decaying time and time duration were investigated and compared with the previous study which was suggested the five profiles of the ice load signals.
Abstract
To navigate in ice-covered waters, the ice-breaking process is required. The ice-breaking mode depends on material properties of sea ice and ice conditions. The ice-breaking mode is classified into ramming and continuous ice-breaking. The ramming is effective on large ice features, such as thick ice ridge and icebergs, and the continuous ice-breaking is on level ice. In general, the impact time duration of crushing or bending on ice sheets is from 0.2 to 1.0 second. However, impact duration in ramming will be increased. The Korean ice-breaking research vessel ARAON conducted her research voyage in the Antarctic sea during the winter of 2012. The IBRV ARAON measured strain in ramming and continuous ice-breaking. Strain gauge signals were recorded during the planned ice-breaking performance and the unplanned ice transits in heavy ice conditions. The aim of this study is to investigate the ice load signals measured in ramming processes under the heavy ice condition. Based on the time history of the signals, a raising time, a half-decaying time and time duration were investigated and compared with the previous study which was suggested the five profiles of the ice load signals.
참고문헌 (12)
- 천은지, "쇄빙연구선 ARAON호의 남극해 쇄빙운항 중 계측된스트레인게이지 데이터 분석", 대한조선학회 논문집, 51(6), pp.489~494 (2014), 대한조선학회
- Choi, K., "Comparison of peak ice pressures on the IBRV ARAON during the planned and the unusual ice transits", The Twenty-third Port and Ocean Engineering under Arctic Conditions (2015)
- 최경식, "남극 아문젠해에서 계측된 해빙의 재료특성비교 분석", 대한조선학회 논문집, 51(3), pp.254~258 (2014), 대한조선학회
- Hysing, T., "Ice loads on icebreaking vessels" (2015), Munundang
- 전영주, "북극해에서의 쇄빙시 국부 빙하중 계측 신호에 대한 파형 분석", 한국항해항만학회지, 37(2), pp.143~148 (2013), 한국항해항만학회[DOI]
- 김호연, "남극해에서 계측된 스트레인게이지 데이터 분석과 아라온호 빙하중 추정에 관한 연구", 석사, 해양공학과, pp.2014
- 권영현, "A study on measurements of local ice pressure for ice breaking research vessel “ARAON” at the Amundsen Sea", International Journal of Naval Architecture and Ocean Engineering, 7(3), pp.490~499 (2015), 대한조선학회
- 이종현, "Characteristics analysis of local ice load signals in ice-covered waters", International Journal of Naval Architecture and Ocean Engineering, 8(1), pp.66~72 (2016), 대한조선학회
- 이민우, "빙해지역 일반 운항 및 쇄빙 운항 시의 빙하중 특성 비교 연구", 한국해양공학회지, 29(1), pp.28~33 (2015), 한국해양공학회
- 이탁기, "Field measurement of local ice pressures on the ARAON in the Beaufort Sea", International Journal of Naval Architecture and Ocean Engineering, 6(4), pp.788~799 (2014), 대한조선학회
- "Northern sea route map" (2013)[URL]
- "The IBRV ARAON" (2017)[URL]