Prediction of fully plastic J-integral for weld centerline surface crack considering strength mismatch based on 3D finite element analyses and artificial neural network

키워드

참고문헌 (48)

1. Betegon, C., "A constraint based parameter for quantifying the crack-tip stress fields in welded joints", Eng. Fract. Mech, 73, pp.1865~1877 (2006)
2. Boothman, D. P., "The effects of weld mismatch on J-integrals and Q-values for semi-elliptical surface flaws", Eng. Fract. Mech, 64, pp.433~458 (1999)
3. Bucar, T., "A neural network approach to describing the scatter of SeN curves", Int. J. Fatig, 28, pp.311~323 (2006)
4. Cao, M. S., "Neural network ensemble-based parameter sensitivity analysis in civil engineering systems", Neural Comput. Appl, 26, pp.1~8 (2015)
5. Donato, G. H. B., "Effects of weld strength mismatch on J and CTOD estimation procedure for SE(B)specimens", Int. J. Fract, 159, pp.1~20 (2009)
6. Fr Lin, MJ Shaw, "Active training of backpropagation neural networks using the learning by experimentation methodology", Ann. Oper. Res, 75, pp.105~122 (1997)
7. Genel, K., "Application of artificial neural network for predicting strain-life fatigue properties of steel on the basis of tensile tests", Int. J. Fatig, 26, pp.1027~1035 (2004)
8. Gy Fu, "Elastic and fully plastic J-integrals for mixed mode fracture induced by inclined surface cracks in plates under biaxial loading", Eng. Fract. Mech, 186, pp.483~495 (2017)
9. Gy Fu, "Stress intensity factors for mixed mode fracture induced by inclined cracks in pipes under axial tension and bending", Theor. Appl. Fract. Mech, 89, pp.100~109 (2017)
10. Hong, C., "Wavelet packet analysis and artificial intelligence based adaptive fault diagnosis", Power Engineering Conference and IEAust Energy Conference, pp.192~198 (1999)
11. Huang, Y. F., "Impacts of residual stresses on J-integral for clamped SE(T) specimens with weld centerline cracks", Theor. Appl. Fract. Mech (2020)[DOI]
12. Ince, R., "Prediction of fracture parameters of concrete by artificial neural networks", Eng. Fract. Mech, 71, pp.2143~2159 (2004)
13. Kim, Y. J., "Numerical investigation on J-integral testing of heterogeneous fracture toughness testing specimensdpart I : weld metal cracks", Fatig. Fract. Eng. Mater. Struct, 26, pp.683~694 (2003)
14. Kirk, M. T., "The influence of weld strength mismatch on crack-tip constrain in single edge notch bend specimens", Int. J. Fract, 18, pp.297~316 (1993)
15. Kobayashi, A. S., "A numerical and experimental investigation on the use of J-integral", Eng. Fract. Mech, 5, pp.293~305 (1973)
16. An Engineering Approach for Elastic-Plastic Fracture Analysis, "Kumar, V.", EPRI, ~, pp.Report NP-1931 (1981)
17. Kumar, V., "Effect of thermal and residual stresses on the J-integral elastic-plastic fracture analysis", Comput. Struct, 40, pp.487~501 (1991)
18. Kumar, S., "Characterization of crack-tip stresses in plane-strain fracture specimens having weld center crack", Int. J. Solid Struct, 51, pp.1464~1474 (2014)
19. Lee, M. M. K., "Effects of biaxial loading on crack driving force and constraints for shallow semi-elliptical surface flaws", Int. J. Fract, 98, pp.37~54 (1999)
20. Lei, Y., "J-integral and limit load analysis of semi-elliptical surface cracks in plates under tension", Int. J. Pres. Ves. Pip, 81, pp.21~30 (2004)
21. Lei, Y., "J-integral and limit load analysis of semi-elliptical surface cracks in plates under bending", Int. J. Pres. Ves. Pip, 81, pp.31~41 (2004)
22. Lei, Y., "J-integral and limit load analysis of semi-elliptical surface cracks in plates under combined tension and bending", Int. J. Pres. Ves. Pip, 81, pp.43~56 (2004)
23. Lei, Y., "Limit load and J estimates of a center cracked plate with an asymmetric crack in a mismatched weld", Int. J. Pres. Ves. Pip, 76, pp.747~757 (1999)
24. Lei, Y., "A J integral estimation method for cracks in welds with mismatched mechanical properties", Int. J. Pres. Ves. Pip, 70(3), pp.237~245 (1997)
25. Li, C. Q., "Stress intensity factors for inclined external surface cracks in pressurized pipes", Eng. Fract. Mech, 165, pp.72~86 (2016)
26. Li, J. C., "A link prediction method for heterogeneous networks based on BP neural network", Physica A, 495, pp.1~17 (2018)
27. Ling, M., "Numerical modeling and artificial neural network for predicting J-integral of top-down cracking in asphalt pavement", Transport. Res. Rec, 2631, pp.83~95 (2017)
28. Development of a Practical Methodology for Elastic-Plastic and Fully Plastic Fatigue Crack Growth, "McClung, R. C.", NASA, ~, pp.NASA (1999), CR-1999-209428
29. Munoz-Abella, B., "Stress intensity factor estimation for unbalanced rotating cracked shafts by artificial neural networks", Fatig. Fract. Eng. Mater. Struct, 38, pp.352~367 (2015)
30. Newman, J. C., "An empirical stress-intensity factor equation for the surface crack", Eng. Fract. Mech, 15, pp.185~192 (1981)
31. Pujol, J. C. F., "A neural network approach to fatigue life prediction", Int. J. Fatig, 33(3), pp.313~322 (2011)
32. Ramberg, W., "Description of StresseStrain Curves by Three Parameters", National Advisory Committee for Aeronautics, 902~, pp.Technical Note No. 902 (1943)
33. Rice, J. R., "A path independent integral and the approximate analysis of strain concentration by notches and cracks", J. Appl. Mech, 35, pp.379~386 (1968)
34. Rubio, L., "A neural approach to crack identification in shafts using wave propagation signals", Proc. Of the Tenth International Conference on Computational Structures Technology (2010)
35. Rumelhart, D. E., "Parallel Distributed Processing : Explorations in the Microstructure of Cognition, Vol1-Vol2" (1986), MIT press
36. Savioli, R. G., "J and CTOD estimation formulas for C(T)fracture specimens including effects of weld strength overmatch", Int. J. Fract, 179, pp.109~127 (2013)
37. Schwalbe, K. H., "Mis-matching of Interfaces and Welds", pp.99~132 (1997), GKSS Research Centre Publications
38. Seibi, A., "Prediction of fracture toughness using artificial neural networks(ANNs)", Eng. Fract. Mech, 3, pp.311~319 (1997)
39. Shih, C. F., "Energy release rate along a threedimensional crack front in a thermally stressed body", Int. J. Fract, 30, pp.79~102 (1986)
40. Sih, G. C., "Review of triaxial crack border stress and energy behaviour", Theor. Appl. Fract. Mech, 12, pp.1~17 (1989)
41. Song, Y., "Spring back prediction in t-section beam bending process using neural networks and finite element method", Arch. Civil. Mech. Eng, 13, pp.229~241 (2013)
42. Souza, R. F., "J-dominance and size requirements in strengthmismatched fracture specimens with weld centerline cracks", J. Braz. Soc. Mech. Sci. Eng, 37, pp.1083~1096 (2015)
43. Structural Integrity Assessment Procedures for European Industry-Final Procedure, "SINTAP", European Union, ~, pp.European Union Project. No.BE95-1426 (1999)
44. Toribio, J., "Aspect ratio evolution associated with surface cracks in sheets subjected to fatigue", Int. J. Fatig, 92, pp.588~595 (2016)
45. ABAQUS, "Version 6.14 Documentation", Dassault Systemes Simulia Corp, ~ (2014)
46. Wang, X., "Fully plastic J-integral solutions for surface cracked plates under biaxial loading", Eng. Fract. Mech, 73, pp.1581~1595 (2006)
47. Yagawa, G., "Three-dimensional fully plastic solutions for semi-elliptical surface cracks", Int. J. Pres. Ves. Pip, 53, pp.457~510 (1993)
48. Zhao, H. S., "Strain-based J-estimation scheme for fracture assessment of misaligned clad pipelines with an interface crack", Mar. Struct, 61, pp.238~255 (2018)

관련 논문AI추천