Comparison of hot spot stress evaluation methods for welded structures
2
조회
0
다운로드
4
인용
0
참고문헌
초록
In this paper, different evaluation methods of Hot Spot Stresses (HSS) have been applied to four different welded structure details in order to compare them and to illustrate their differences. The HSSs at failure-critical locations were calculated by means of a series of finite element analyses. There was good overall agreement between calculated and experimentally determined HSS on the critical locations. While different methods and procedures exist for the computation of the structural hot-spot stress at welded joints, the recommendations within the International Institute of Welding (IIW) guideline concerning the ‘Hot Spot Stress’ approach were found to give good reference stress approximations for fatigue-loaded welded joints. This paper recommends and suggests an appropriate finite element modeling and hot spot stress evaluation technique based on round-robin stress analyses and experimental results of several welded structure details.
Abstract
In this paper, different evaluation methods of Hot Spot Stresses (HSS) have been applied to four different welded structure details in order to compare them and to illustrate their differences. The HSSs at failure-critical locations were calculated by means of a series of finite element analyses. There was good overall agreement between calculated and experimentally determined HSS on the critical locations. While different methods and procedures exist for the computation of the structural hot-spot stress at welded joints, the recommendations within the International Institute of Welding (IIW) guideline concerning the ‘Hot Spot Stress’ approach were found to give good reference stress approximations for fatigue-loaded welded joints. This paper recommends and suggests an appropriate finite element modeling and hot spot stress evaluation technique based on round-robin stress analyses and experimental results of several welded structure details.
참고문헌 (16)
- ANSYS, "User’s Manual, Houston", Swanson Analysis Systems Inc, ~ (2006)
- American Bureau of Shipping(ABS), "Guide for fatigue strength assessment of tankers, Part 3 Steel Vessel Rules", American Bureau of Shipping, ~ (1992)
- Det Norske Veritas(DNV), "Fatigue Design of Offshore Steel Structures", Recommended Practice DNV-RP-C203, ~ (2008)
- Doerk, O, "Comparison of different calculation methods for structural stresses at welded joints", International Journal of Fatigue, 25(5), pp.359~369 (2003)
- Dong,P., "A structural stress definition and numerical implementation for fatigue analyses", International Journal of Fatigue, 23(10), pp.865~876 (2001)
- Dong, P, "Structural stress based master S–N curve for welded joints. IIW Doc", XIII-1930-02, 2002
- Eurocode 9, "Design of aluminum structures - Part 2:Structures susceptible to fatigue", EN 1999-2:1998 E, British Standard, ~ (1998)
- Fricke,W., "Evaluation of Hot Spot Stresses in Complex Welded Structures. Proceedings of the IIW Fatigue Seminar", Institute of Technology (2002)
- Fricke, W, "Comparison of different structural stress approaches for fatigue assessment of welded ship structures", Marine Structures, 18, pp.473~488 (2005)
- Fricke, W, "Fatigue Strength of Ship Structures-Expample", GL-Technology, 1, 1998 (1998)
- Hobbacher, A., "The new IIW recommendations for fatigue assessment of welded joints and components - A comprehensive code recently updated", International Journal of Fatigue, 31(1), pp.50~58 (2009)
- Hobbacher A, "Recommendations for fatigue design of welded joints and components", IIW doc. XIII-1823-07.Welding Research Council Bulletin, 520~ (2009)
- Niemi, E, "Stress determination for fatigue analysis of welded components", IIW Doc XIII-1221-93. International Institute of Welding, Cambridge, ~ (1995)
- Petershagen, H, "Application of the local approach to the fatigue strength assessment of welded structures in ship", IIW Doc. XIII-1409-91.International Institute of Welding, ~ (1991)
- Radaj,D., "Design and analysis of fatigue-resistant welded structures" (1990), Abington Pub. Cambridge
- Xiao, Z.G, "A method of determining geometric stress for fatigue strength evaluation of steel welded joints", International Journal of Fatigue, 26(12), pp.1277~1293 (2004)