삭제기구의 종류에 따른 자가부식 프라이머 접착제의 법랑질에 대한 미세전단 결합강도
Microshear bond strength of a self-etching primer adhesive to enamel according to the type of bur
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
연구목적: 이 연구는 서로 다른 버로 형성한 법랑질 표면에 대한 자가부식 프라이머 접착제의 결합강도를 상호 비교함으로써법랑질에 우수한 접착 표면을 제공하는 적절한 버를 알아보기 위해 시행하였다. 연구 재료 및 방법: 42개의 발거된 대구치 치관의 법랑질을 이용하였고, 법랑질을 삭제하는 기구의 종류에 따라 6개군, 즉1군은 Coarse (125 - 150 μm) diamond bur; 2군은 standard (106 - 125 μm) diamond bur; 3군은 fine (53 - 63 μm)diamond bur; 4군은 extrafine (20 - 30 μm) diamond bur; 5군은 plain-cut carbide bur (no. 245); 6군은 cross-cut carbide bur (no. 557)으로 분류하였다. 각 군의 법랑질 표면에 Clearfil SE Bond를 적용한 후 Tygon tube를 이용하여Clearfil AP-X를 접착하였다. 각 군의 미세전단 결합강도를 측정하였다. 결과: 4군의 결합강도는 모든 군중 가장 높게 나타나 1군, 2군, 3군 및 6군보다 통계학적으로 높게 나타났으며(p < 0.05),5군과는 통계학적으로 유의한 차이를 나타내지 않았다(p > 0.05). 결론: 버의 종류와 다이아몬드 버의 입자크기는 약한 자가 산부식 프라이머 접착제의 법랑질에 대한 결합강도에 영향을 주었다. Clearfil SE Bond의 법랑질에 대한 우수한 접착을 위해서는 초미세입자 다이아몬드 버나 plain-cut 카바이드 버의 사용이 추천된다.
Abstract
Objectives: The purpose of this study was to compare the microshear bond strength (uSBS) to enamel prepared with different burs and to determine what type of bur were chosen when a self-etching primer adhesive was used. Materials and Methods: Enamel of forty-two human molars were used. They were divided into one of six groups (n = 7), Group 1, coarse (125 - 150 μm) diamond bur; Group 2, standard (106 - 125 μm) diamond bur; Group 3, fine (53 - 63 μm) diamond bur; Group 4, extrafine (20 - 30 μm) diamond bur; Group 5, plaincut carbide bur (no. 245); Group 6, cross-cut carbide bur (no. 557). Clearfil SE Bond and Clearfil AP-X (Kuraray Medical Inc.) was bonded to enamel surface. The bonded specimens were subjected to uSBS testing. Results: The uSBS of Group 4 was the highest among groups and it was significantly higher than that of Groups 1, 2, 3, and 6 (p < 0.05), but it was not significantly different from that of Group 5. Conclusions: Different burs used on enamel surface affected the microshear bond strengths of a self-etching primer adhesive to the enamel surface. In the case of Clearfil SE Bond, extrafine diamond and plain-cut carbide bur are recommended for bonding to enamel. [J Kor Acad Cons Dent 2011;36(6):477-482.]
참고문헌 (28)
- Swift EJ Jr, "Bonding to enamel and dentin: a brief history and state of art, 1995", Quintessence Int, 26, pp.95~110 (1995)
- 김용희, "삭제기구가 자가 산부식 접착제의 미세누출에 미치는 영향", Restorative Dentistry and Endodontics, 32(4), pp.327~334 (2007), 대한치과보존학회
- 이명구, "다이아몬드 기구로 삭제한 와동에서 2단계 접착제의 미세누출 비교", Restorative Dentistry and Endodontics, 32(5), pp.437~444 (2007), 대한치과보존학회
- Moll K, "Effect of simulated pulpal pressure on dentin bond strength of self-etching bonding systems", Am J Dent, 18, pp.335~339 (2005)
- Hobson RS, "Acid-etch patterns on the buccal surface of human permanent teeth", Arch Oral Biol, 47, pp.407~412 (2002)
- Hayakawa T, "Influence of selfetching primer treatment on the adhesion of resin composite to polished dentin and enamel", Dent Mater, 14, pp.99~105 (1998)
- Inoue S, "Microtensile bond strength of eleven contemporary adhesives to enamel", Am J Dent, 16, pp.329~334 (2003)
- Perdigão J, "Bonding characteristics of selfetching adhesives to intact versus prepared enamel", J Esthet Restor Dent, 15, pp.32~41 (2003)
- Kanemura N, "Tensile bond strength to and SEM evaluation of ground and intact enamel surfaces", J Dent, 27, pp.523~530 (1999)
- Senawongse P, "Bond strengths of current adhesive systems on intact and ground enamel", J Esthet Restor Dent, 16, pp.107~115 (2004)
- Torii Y, "Effect of phosphoric acid etching prior to self-etching primer application on adhesion of resin composite to enamel and dentin", Am J Dent, 15, pp.305~308 (2002)
- Toledano M, "Influence of selfetching primer on the resin adhesion to enamel and dentin", Am J Dent, 14, pp.205~210 (2001)
- Perdigão J, "Effects of a self-etching primer on enamel shear bond strengths and SEM morphology", Am J Dent, 10, pp.141~146 (1997)
- Ikeda T, "Relation of enamel prism orientation to microtensile bond strength", Am J Dent, 15, pp.109~113 (2002)
- Shimada Y, "Effects of regional enamel and prism orientation on resin bonding", Oper Dent, 28, pp.20~27 (2003)
- Jung M, "Surface roughness and bond strength of enamel to composite", Dent Mater, 15, pp.250~256 (1999)
- Dias WR, "Effect of bur types on microtensile bond strengths of self-etching systems to human dentin", J Adhes Dent, 6, pp.195~203 (2004)
- Hosoya Y, "Effects of diamond bur particle size on dentin bond strength", Am J Dent, 17, pp.359~364 (2004)
- 이영곤, "상아질 표면 거칠기, 자가부식 접착제, 결합강도, 다이아몬드 포인트, 카바이드 버, SiC paper", Restorative Dentistry and Endodontics, 35(1), pp.13~19 (2010), 대한치과보존학회
- Yoshiyama M, "Regional strengths of bonding agents to cervical sclerotic root dentin", J Dent Res, 75, pp.1404~1413 (1996)
- Hannig M, "Self-etching primer vs phosphoric acid: an alternative concept for composite- to-enamel bonding", Oper Dent, 24, pp.172~180 (1999)
- Sano H, "Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test", Dent Mater, 10, pp.236~240 (1994)
- Shimada Y, "Shear bond strength of current adhesive systems to enamel, dentin and dentin-enamel junction region", Oper Dent, 28, pp.585~590 (2003)
- Shimada Y, "Micro-shear bond strength of resin-bonding systems to cervical enamel", Am J Dent, 15, pp.373~377 (2002)
- Lopes GC, "Composite bond strength to enamel with self-etching primers", Oper Dent, 29, pp.424~429 (2004)
- Pashley DH, "Aggressiveness of contemporary self-etching adhesives. Part II: etching effects on unground enamel", Dent Mater, 17, pp.430~444 (2001)
- Tay FR, "Aggressiveness of self-etch adhesives on unground enamel", Oper Dent, 29, pp.309~316 (2004)
- Shimada Y, "Bond strength of two adhesive systems to primary and permanent enamel", Oper Dent, 27, pp.403~409 (2002)