Research of fast point cloud registration method in construction error analysis of hull blocks
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The construction quality control of hull blocks is of great significance for shipbuilding. The total station device is predominantly employed in traditional applications, but suffers from long measurement time, high labor intensity and scarcity of data points. In this paper, the Terrestrial Laser Scanning (TLS) device is utilized to obtain an efficient and accurate comprehensive construction information of hull blocks. To address the registration problem which is the most important issue in comparing the measurement point cloud and the design model, an automatic registration approach is presented. Furthermore, to compare the data acquired by TLS device and sparse point sets obtained by total station device, a method for key point extraction is introduced. Experimental results indicate that the proposed approach is fast and accurate, and that applying TLS to control the construction quality of hull blocks is reliable and feasible.
Abstract
The construction quality control of hull blocks is of great significance for shipbuilding. The total station device is predominantly employed in traditional applications, but suffers from long measurement time, high labor intensity and scarcity of data points. In this paper, the Terrestrial Laser Scanning (TLS) device is utilized to obtain an efficient and accurate comprehensive construction information of hull blocks. To address the registration problem which is the most important issue in comparing the measurement point cloud and the design model, an automatic registration approach is presented. Furthermore, to compare the data acquired by TLS device and sparse point sets obtained by total station device, a method for key point extraction is introduced. Experimental results indicate that the proposed approach is fast and accurate, and that applying TLS to control the construction quality of hull blocks is reliable and feasible.
참고문헌 (21)
- Besl, P. J., "A method for registration of 3-d shapes", IEEE Trans. Pattern Anal. Mach. Intell, pp.121791~ (1992)[DOI]
- Biosca, J. M., "Unsupervised robust planar segmentation of terrestrial laser scanner point clouds based on fuzzy clustering methods", ISPRS J. Photogrammetry Remote Sens, 63(1), pp.84~98 (2008)[DOI]
- Bosche, Frederic, "Plane-based registration of construction laser scans with 3d", 4d building models, 2012, pp.26(1), 90~102
- Bueno, Martín, "4-plane congruent sets for automatic registration of as-is 3d point cl-ouds with 3d bim models", Autom. ConStruct, 89, pp.120~134 (2018)[DOI]
- Fischler, M. A., "Random sample consensus : a paradigm for model fitting with applications to image analysis and automated cartography", Commun. ACM, 24(6), pp.381~395 (1981)[DOI]
- Fontanelli, D., "A fast RANSAC-based registration algorithm for accurate localization in unknown environments using LIDAR measurements", IEEE International Conference on Automation Science & Engineering (2007), IEEE
- Forstner, W., "Efficient and Accurate Registration of Point Clouds with Plane to Plane Correspondences", 2017 Ieee International Conference on Computer Vision Workshops (Iccvw), pp.2165~2173 (2017)
- Frome, A., "Recognizing objects in range data using regional point descriptors", Eccv, 3023, pp.224~237 (2004)[DOI]
- Hackel, T., "Fast semantic segmentation of 3d point clouds with strongly varying density", ISPRS Ann. Photogram. Rem. Sens. Spatial Inf, III(3), pp.177~184 (2016)[DOI]
- Horn, B. K. P., "Closed-form solution of absolute orientation using orthonormal matrices", J. Opt. Soc. Am. A, 5(7), pp.1127~1135 (1988)[DOI]
- Jian, Y., "Point-plane SLAM for hand-held 3D sensors", IEEE International Conference on Robotics & Automation (2013), IEEE
- Johnson, A. E., "Using spin images for efficient object recognition in cluttered 3d scenes", IEEE Trans. Pattern Anal. Mach. Intell, 21(5), pp.433~449 (2002)[DOI]
- Khoshelham, K., "Closed-form solutions for estimating a rigid motion from plane correspondences extracted from point clouds", ISPRS J. Photogrammetry Remote Sens, 114, pp.78~91 (2016)[DOI]
- Kim, C., "Fully automated registration of 3d data to a 3d cad model for project progress monitoring", Autom. ConStruct, 35, pp.587~594 (2013)[DOI]
- Olsson, C., "The registration problem revisited: optimal solutions from points, lines and planes", 2006 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR 2006) (2006), IEEE
- Pathak, K., "Online three-dimensional slam by registration of large planar surface segments and closed-form pose-graph relaxation", J. Field Robot, 27(1), pp.52~84 (2010)[DOI]
- Rusu, R. B., "Aligning point cloud views using persistent feature histograms", IEEE, 2008, ~[DOI]
- Rusu, R.B, "Fast point feature histograms (FPFH) for 3D registration", IEEE International Conference on Robotics and Automation, pp.1848~1853 (2009), IEEE Press
- Tang, P., "Automatic reconstruction of as-built building information models from laser-scanned point clouds : a review of related techniques", Autom. ConStruct, 19(7), pp.829~843 (2010)[DOI]
- Tombari, F., "Unique shape context for 3d data description", ACM Workshop on 3d Object Retrieval, pp.57~62 (2010)
- Yang, J., "Toldi: an effective and robust approach for 3d local shape description", Pattern Recogn, 65 (2016)