A new method of predicting hotspot stresses for longitudinal attachments with reduced element sensitivities
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
For the complicated structural details in ships and offshore structures, the traditional hotspot stress approaches are known to be sensitive to the element variables of element topologies, sizes, and integration schemes. This motivated to develop a new approach for predicting reasonable hotspot stresses, which is less sensitive to the element variables and easy to be implemented the real marine structures. The three-point bending tests were conducted for the longitudinal attachments with the round and rectangular weld toes. The tests were reproduced in the numerical simulations using the solid and shell element models, and the simulation technique was validated by comparing the experimental stresses with the simulated ones. This paper considered three hotspot stress approaches: the ESM method based on surface stress extrapolation, the Dong's method based on nodal forces along a weld toe, and the proposed method based on nodal forces perpendicular to an imaginary vertical plane at a weld toe. In order to study the element sensitivities of each method, 16 solid element models and 8 shell element models were generated under the bending and tension loads, respectively. The element sensitivity was analyzed in terms of Stress Concentration Factors (SCFs) in viewpoints of two statistical quantities of mean and bias with respect to the reference SCFs. The average SCFs predicted by the proposed method were remarkably in good agreement with the reference SCFs based on the experiments and the ship rules. Negligibly small Coefficients of Variation (CVs) of the SCFs, which is measure of statistical bias, were drawn by the proposed method.
Abstract
For the complicated structural details in ships and offshore structures, the traditional hotspot stress approaches are known to be sensitive to the element variables of element topologies, sizes, and integration schemes. This motivated to develop a new approach for predicting reasonable hotspot stresses, which is less sensitive to the element variables and easy to be implemented the real marine structures. The three-point bending tests were conducted for the longitudinal attachments with the round and rectangular weld toes. The tests were reproduced in the numerical simulations using the solid and shell element models, and the simulation technique was validated by comparing the experimental stresses with the simulated ones. This paper considered three hotspot stress approaches: the ESM method based on surface stress extrapolation, the Dong's method based on nodal forces along a weld toe, and the proposed method based on nodal forces perpendicular to an imaginary vertical plane at a weld toe. In order to study the element sensitivities of each method, 16 solid element models and 8 shell element models were generated under the bending and tension loads, respectively. The element sensitivity was analyzed in terms of Stress Concentration Factors (SCFs) in viewpoints of two statistical quantities of mean and bias with respect to the reference SCFs. The average SCFs predicted by the proposed method were remarkably in good agreement with the reference SCFs based on the experiments and the ship rules. Negligibly small Coefficients of Variation (CVs) of the SCFs, which is measure of statistical bias, were drawn by the proposed method.
참고문헌 (38)
- ABAQUS, "User's Manual vol. 2018", ~ (2018)
- Belytschko, T., "Hourglass control in linear and nonlinear problems", Comput. Methods Appl. Math, 43(3), pp.251~276 (1984)
- DNV, "Fatigue assessment of ship structures, Classification notes No. 30.7 (Det Norske Veritas)", ~ (2014)
- DNV, "Fatigue Assessment of Ship Structures, Class Guideline DNVGL-CG-0129(Det Norske Veritas)", ~ (2015)
- DNV, "Welding, rules for classification ships-3-13 (Det Norske Veritas)", ~ (2015)
- Doerk, O., "Comparison of different calculation methods for structural stresses at welded joints", Int. J. Fatig, 25, pp.359~369 (2003)
- A mesh-insensitive structural stress procedure for fatigue evaluation of welded structures, "Dong, P.", IIW, ~, pp.IIW Document XII-1902-01XV-1089-01 (2000)
- Dong, P., "A structural stress definition and numerical implementation for fatigue analyses", Int. J. Fatig, 23(10), pp.865~876 (2001)
- A structural stress based master S-N curve approach for welded joints, "Dong, P.", IIW, ~, pp.IIW Document XIII-1930-02XV-1119-02 (2002)
- Dong, P., "A robust structural stress method for fatigue analysis of offshoremarine structures", J. Offshore Mech. Arctic Eng, 127(1), pp.68~74 (2005)
- Dong, P., "Analysis of recent fatigue data using the structural stress procedure in ASME Div 2 rewrite", J. Press. Vess. Technol, 129, pp.355~362 (2007), ASME
- Hotspot stress analysis of five structural details and recommendations for modelling, stress evaluation and design S-N curve, "Fricke, W.", GL, 188~, pp.Report No FF99.188.A. Rev 02 (2000)
- Fricke, W., "Recommended hotspot analysis procedure for structural details of ships and FPSOs based on round-robin FE analyses", Int. J. Offshore Polar Eng, 12(1), pp.40~47 (2002)
- Fricke, W., "Comparison of different structural stress approaches for fatigue assessment of welded ship structures", Mar. Struct, 18, pp.473~488 (2005)
- Healy, B., "A case study comparison of surface extrapolation and Battelle structural stress methodologies", Proceeding of the 23rd International Conference on Ocean, Offshore and Arctic Engineering (2004)
- Recommendations for Fatigue Design of Welded Joints and Components, vol. 520, "Hobbacher, A.", WRC, ~ (2009)
- Huther, I., "Longitudinal nonloaded welded joints-geometrical stress approach", Weld. World, 43(3), pp.20~26 (1999)
- IACS, "Common structural rules for bulk carriers and oil tankers", International Association of Classification Societies, ~ (2014)
- Kang, H. T., "Fatigue analysis of spot welds using a meshinsensitive structural stress approach", Int. J. Fatig, 29, pp.1546~1553 (2007)
- Kim, C. S., "Prediction of crack growth of an aged coast guard patrol ship based on various approaches", Proceeding of the 6th International Conference on Marine Structures (2017)
- 김창식, "확장 유한 요소법(XFEM) J-적분을 이용한 노후 순시선의 균열 성장 수명 예측", 대한조선학회 논문집, 54(4), pp.335~343 (2017), 대한조선학회[DOI]
- 김명현, "구조응력 및 핫스팟 응력을 이용한 8,100 TEU 컨테이너선선측 종늑골구조의 피로 강도 평가에 대한 비교 연구", 대한조선학회 논문집, 45(3), pp.296~302 (2008), 대한조선학회
- Li, C. B., "Fatigue damage analysis for a floating offshore wind turbine mooring line using the artificial neural network approach", Ships Offshore Struct, 12(1), pp.288~295 (2016)
- Li, C. B., "Wide-banded fatigue damage evaluation of Catenary mooring lines using artificial neural networks models", Mar. Struct, 60, pp.186~200 (2018)
- Li, C. B., "Prediction of stress spectra under low period sea states", Ships Offshore Struct, 13(1), pp.56~67 (2018)
- Li, C. B., "Dynamic structural response characteristics of perforated blast walls under hydrocarbon explosion", Proceeding of the 7th International Conference on Thin-Walled Structures (2014)
- Li, C. B., "Proposed formulas for evaluation of the equivalent material properties of a multiholed structures", Ocean. Eng, 121(15), pp.312~322 (2016)
- Lotsberg, I., "Fatigue design of plated structures using finite element analysis", Ships Offshore Struct, 1(1), pp.45~54 (2010)
- LR, "Ship Right Design and Construction, Fatigue Design Assessment-Application and Notations", Lloyd's Register, ~ (2015)
- Niemi, E., "Recommendations Concerning Stress Determination for Fatigue Analysis of Welded Components" (1995), Abington Publ
- Niemi, E., "Hotspot stress determination for welded edge gussets", Weld. World, 44(5), pp.31~37 (2000)
- Niemi, E., "Fatigue Analysis of Welded Components-Designer's Guide to the Hot-Spot Stress Approach" (2006), Woodhead Publ
- Application of the local approach to the fatigue strength assessment of welded structures in ships, "Petershagen, H.", IIW, 1409~1491, pp.IIW Document XIII (1991)
- Poutiainen, I., "Finite element methods for structural hotspot stress determination e a comparison of procedures", Int. J. Fatig, 26, pp.1147~1157 (2004)
- Radaj, D., "Design and Analysis of Fatigue-Resistant Welded Structures" (1990), Abington Pub
- Remes, H., "Influencing factors on fatigue strength of welded thin plates based on structural stress assessment", Weld. World, 58, pp.915~923 (2014)
- Xing, S., "Fatigue of titanium weldments : S-N testing and analysis for data transferability among different joint types", Int. J. Fatig, 53, pp.1~19 (2017)
- Xiao, Z. G., "A method of determining geometric stress for fatigue strength evaluation of steel welded joints", Int. J. Fatig, 26, pp.1277~1293 (2004)