Some Practical Design Aspects of Appendages for Passenger Vessels
1
조회
0
다운로드
0
인용
0
참고문헌
초록
The hydrodynamic effect of appendages for high-speed passenger vessels, such as Ro-Pax, Ro-Ro and cruiser vessels, is very severe and, therefore, it is essential to carry out the design of appendages for high-speed passenger vessels from the preliminary design stage to the final detail design stage through a full survey of the reference vessels together with sufficient technical investigation. Otherwise, many problems would be caused by mismatches between the appendages and the hull form. This paper investigates the design characteristics of some appendages, such as the side thruster, the shaft-strut, and the stern wedge, based on the design experience accumulated at Samsung, on CFD, and on model test results for high-speed passenger vessels. Further to this investigation, some practical and valuable design guidelines for such appendages are suggested.
Abstract
The hydrodynamic effect of appendages for high-speed passenger vessels, such as Ro-Pax, Ro-Ro and cruiser vessels, is very severe and, therefore, it is essential to carry out the design of appendages for high-speed passenger vessels from the preliminary design stage to the final detail design stage through a full survey of the reference vessels together with sufficient technical investigation. Otherwise, many problems would be caused by mismatches between the appendages and the hull form. This paper investigates the design characteristics of some appendages, such as the side thruster, the shaft-strut, and the stern wedge, based on the design experience accumulated at Samsung, on CFD, and on model test results for high-speed passenger vessels. Further to this investigation, some practical and valuable design guidelines for such appendages are suggested.
참고문헌 (11)
- Appendage optimization test report for 154m class Ro- Pax, "Choi, S.H", Samsung H.I., ~, pp.SSMB Report No. R29213TT-T1 (2002)
- ABS, "Proposed rules for building and classing highspeed craft , Part 3, Chapter 2, Appendix 3", ~ (2003)
- Model test report for 50,000 GT cruise vessel, "Rhyu, S.S", Samsung H.I., ~, pp.SSMB Report No. R20039TT (2003)
- 김성표, "바우 스러스터 터널 그리드 개선을 위한 연구", 대한조선학회 논문집, 43(3), pp.304~312 (2006), 대한조선학회
- Saunders, H.E., "Hydrodynamics in ship design" (1957), SNAME
- Losee, L.K., "Shaft struts – DDS 4301-2, Design Data Sheet. Dept. of the Navy, Bureau of ships", ~ (1957)
- Hackett, J.P, "Propeller shaft strut design", Trans. of SNAME, pp.101~126 (1999)
- LR, "Rules and regulations for the classification of special service craft, Part 3, Chapter 3, Section 3", ~ (2003)
- Cumming, D, "Hydrodynamic design of a stern flap appendage for the HALIFAX class frigates", Proc. of MARI-TECH 2006 (2006)
- Thornhill, E, , Proc. of 27th Symposium on Naval Hydrodynamics (2008)
- Karafiath, G, "Stern wedges and stern flaps for improved powering – US Navy experience", SNAME Annual meeting preprints (1999)