Preliminary tests of a damaged ship for CFD validation
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
One of the most critical issues in naval architecture these days is the operational safety. Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions is the first to ensure for both commercial and military vessels. Unlike the intact stability cases, the assessment of the damaged ship stability is very complicated physical phenomena. Therefore it is widely acknowledged that computational fluid dynamics (CFD) methods are one of most feasible approaches. In order to develop better CFD methods for damaged ship stability assessment, it is essential to perform well-designed model tests and to build a database for CFD validation. In the present study, free roll decay tests in calm water with both intact and damaged ships were performed and six degree-of-freedom (6DOF) motion responses of intact ship in regular waves were measured. Through the free roll decay tests, the effects of the flooding water on the roll decay motion of a ship were investigated. Through the model tests in regular waves, the database that provides 6DOF motion responses of intact ship was established.
Abstract
One of the most critical issues in naval architecture these days is the operational safety. Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions is the first to ensure for both commercial and military vessels. Unlike the intact stability cases, the assessment of the damaged ship stability is very complicated physical phenomena. Therefore it is widely acknowledged that computational fluid dynamics (CFD) methods are one of most feasible approaches. In order to develop better CFD methods for damaged ship stability assessment, it is essential to perform well-designed model tests and to build a database for CFD validation. In the present study, free roll decay tests in calm water with both intact and damaged ships were performed and six degree-of-freedom (6DOF) motion responses of intact ship in regular waves were measured. Through the free roll decay tests, the effects of the flooding water on the roll decay motion of a ship were investigated. Through the model tests in regular waves, the database that provides 6DOF motion responses of intact ship was established.
참고문헌 (11)
- Chen, H.C., "Time-domain simulation of barge capsizing by a Chimera domain decomposition approach", Proceedings of the 12th International Offshore and Polar Engineering Conference, Kitakyushu, Japan, pp.314~321 (2002)
- 조석규, "ITTC RoRo-Passenger 손상부위 침수유동 특성에 관한 연구", 대한조선학회 논문집, 43(4), pp.451~460 (2006), 대한조선학회
- Gao, Z., "Numerical simulation of water flooding into a damaged vessel’s compartment by the Volume of Fluid method", Ocean Engineering, 37(16), pp.1428~1442 (2010)
- 김태영, "Multi-level approach for parametric roll analysis", International Journal of Naval Architecture and Ocean Engineering, 3(1), pp.53~64 (2011), 대한조선학회
- 김용환, "Time-domain analysis of nonlinear motion responses and structural loads on ships and offshore structures: development of WISH programs", International Journal of Naval Architecture and Ocean Engineering, 3(1), pp.37~52 (2011), 대한조선학회
- 이성균, "CFD 검증용 데이터베이스 구축을 위한 손상 선박의 횡동요 감쇠 운동에 대한 실험적 연구", 대한조선학회 논문집, 49(1), pp.52~59 (2012), 대한조선학회
- Measurement of six degree of motions using Strapdown accelerometers. Hydraulic Laboratory, "Miles, M.D.", National Research Council, ~ (1992)
- Palazzi, L., "Model experiments and simulations of a damaged ship with air flow taken into account", Marine Technology, 41(1), pp.38~44 (2004)
- Papanikolaou, D., "Investigation into the Capsizing of damaged RO-RO passenger ships in waves", Proceedings of 7th International Conference on Stability of Ship and Ocean Vehicles, Tasmania, Australia (2000)
- Paulling, J.R., "On unstable ship motions resulting from non-linear coupling", Journal of Ship Research, 3(1), pp.36~46 (1959)
- Ruponen, P., "Progressive flooding of a damaged passenger ship", 박사, Department of Mechanical Engineering, pp.2007