On the energy economics of air lubrication drag reduction
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Air lubrication techniques for frictional drag reduction on ships have been proposed by numerous rese¬archers since the 19th century. However, these techniques have not been widely adopted as questions persist about their drag reduction performance beyond the laboratory, as well as energy and economic cost-benefit. This paper draws on data from the literature to consider the suitability of air lubrication for large ocean going and U.S. Great Lakes ships, by establishing the basic energy economic calculations and presenting results for a hypothetical air lubricated ship. All the assumptions made in the course of the analysis are clearly stated so that they can be refined when considering application of air lubrication to a specific ship. The analysis suggests that, if successfully implemented, both air layer and partial cavity drag reduction could lead to net energy savings of 10 to 20%, with corresponding reductions in emissions.
Abstract
Air lubrication techniques for frictional drag reduction on ships have been proposed by numerous rese¬archers since the 19th century. However, these techniques have not been widely adopted as questions persist about their drag reduction performance beyond the laboratory, as well as energy and economic cost-benefit. This paper draws on data from the literature to consider the suitability of air lubrication for large ocean going and U.S. Great Lakes ships, by establishing the basic energy economic calculations and presenting results for a hypothetical air lubricated ship. All the assumptions made in the course of the analysis are clearly stated so that they can be refined when considering application of air lubrication to a specific ship. The analysis suggests that, if successfully implemented, both air layer and partial cavity drag reduction could lead to net energy savings of 10 to 20%, with corresponding reductions in emissions.
참고문헌 (26)
- Amromin, E., "Partial cavitation as drag reduction technique and problem of active flow control", Marine Technology, 40(3), pp.181~188 (2003)
- Arndt, R.E.A., "Creation and maintenance of cavities under horizontal surfaces in steady and gust flows", Journal of Fluids Engineering, 131(11) (2009)
- Butuzov, A., "State of art in investigations and development for the ship on the air cavities", International Workshop on Ship Hydrodynamics. China, pp.1~14 (1999)
- Butuzov, A.A., "Artificial cavitation flow behind a slender wedge on the lower surface of a horizontal wall", Fluid Dynamics, 2(2), pp.56~58 (1967)
- Ceccio, S.L., "Friction drag reduction of external flows with bubble and gas injection", Annual Review of Fluid Mechanics, 42, pp.183~203 (2010)
- Choi, K.-S., "Emerging techniques in drag reduction" (1996), Mechanical Engineering Publications Limited
- Elbing, B.R., "Bubble-induced skin-friction drag reduction and the abrupt transition to air-layer drag reduction", Journal of Fluid Mechanics, 612, pp.201~236 (2008)
- Foeth, E.-J., "Projects prove that air cavities reduce ship resistance", Report, MARIN’s news magazine, 16 (2011)
- Gokcay, S., "Revisiting artificial air cavity concept for high speed craft", Ocean Engineering, 31(3), pp.253~267 (2004)
- Hoang, C.L., "Full scale experiment for frictional resistance reduction using air lubrication method", Proc. of the Nineteenth International Offshore and Polar Engineering Conference, pp.812~817 (2009)
- Kodama, Y., "Experimental study on microbubbles and their applicability to ships for skin friction reduction", International Journal of Heat Fluid Flow, 21(5), pp.582~588 (2000)
- Kawashima, H., "A research project on application of air bubble injection to a full scale ship for drag reduction", 5th Joint ASME, 2007, ~
- Latorre, R., "Ship hull drag reduction using bottom air injection", Ocean Engineering, 24(2), pp.161~175 (1997)
- Lay, K. A., "Partial cavity drag reduction at high Reynolds numbers", Journal of Ship Research, 54(2), pp.109~119 (2010)
- Miller, R.H., "Great lakes thousand footers", Proceedings, Joint Eastern Canada and Great Lakes and Great Rivers Sections of Society of Naval Architects and Marine Engineers Meeting. Toronto, Ontario (1979)
- Madavan, N.K., "Measurements of local skin friction in a microbubble modified turbulent boundary layer", Journal of Fluid Mechanics, 156, pp.237~256 (1985)
- Matveev, K.I., "On the limiting parameters of artificial cavitation", Ocean Engineering, 30(9), pp.1179~1190 (2003)
- Mäkiharju, S., "Perturbed Partial Cavity Drag Reduction at High Reynolds Numbers", Proc. 28th Symp. on Naval Hydrodynamics. Pasadena, CA (2010)
- Mäkiharju, S., "The dynamics of ventilated partial cavities over a wide range of Reynolds Numbers and Quantitative 2D X-ray densitometry for multiphase flow", 박사, pp.2012
- Mizokami, S., "Experimental study of air lubrication method and verification of effects on actual hull by means of sea trial", Mitsubishi Heavy Industries Technical Review, 47(3), pp.41~47 (2010)
- , Proceedings of the 2nd International Symposium on Seawater drag reduction (2005)
- , Proceedings of the International Symposium on Seawater drag reduction (1998)
- Parsons, M.G., "Integrated electric plants in future great lakes self-unloaders", Journal of Ship Production and Design, 27(4), pp.169~185 (2011)
- Sonntag, R.E., "Fundamentals of thermodynamics" (2003), Wiley
- Sanders, W.C., "Bubble friction drag reduction in a high-Reynolds-number flat-plate turbulent boundary layer", Journal of Fluid Mechanics, 552, pp.353~380 (2006)
- Surveyor, "Airship of the sea. Surveyor", Surveyor, A Quarterly Magazine from ABS, 10~15 (2011)