Quality of root canal fillings using three gutta-percha obturation techniques
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Objectives: The goal of this study was to compare the density of gutta-percha root fillings obturated with the following techniques: cold lateral (CL) compaction, ultrasonic lateral (UL) compaction, and warm vertical (WV) compaction. Materials and Methods: Thirty-three extracted mandibular first molars, with two separate mesial canals in each, were selected. After instrumentation, the canals were stratified into three groups based on canal length and curvature, and underwent obturation with one of the techniques. No sealer was used in order to avoid masking any voids. The teeth were imaged pre- and post-obturation using micro-computed tomography. The reconstructed three-dimensional images were analyzed volumetrically to determine the amount of gutta-percha present in every 2 mm segment of the canal. P values < 0.05 were considered to indicate statistical significance. Results: The overall mean volume fraction of gutta-percha was 68.51 ± 6.75% for CL, 86.56 ± 5.00% for UL, and 88.91 ± 5.16% for WV. Significant differences were found between CL and UL and between CL and WV (p < 0.05), but not between UL and WV (p = 0.526). The gutta-percha density of the roots treated with WV and UL increased towards the coronal aspect, but this trend was not noted in the CL group. Conclusions: WV compaction and UL compaction produced a significantly denser gutta-percha root filling than CL compaction. The density of gutta-percha was observed to increase towards the coronal aspect when the former two techniques were used.
Abstract
Objectives: The goal of this study was to compare the density of gutta-percha root fillings obturated with the following techniques: cold lateral (CL) compaction, ultrasonic lateral (UL) compaction, and warm vertical (WV) compaction. Materials and Methods: Thirty-three extracted mandibular first molars, with two separate mesial canals in each, were selected. After instrumentation, the canals were stratified into three groups based on canal length and curvature, and underwent obturation with one of the techniques. No sealer was used in order to avoid masking any voids. The teeth were imaged pre- and post-obturation using micro-computed tomography. The reconstructed three-dimensional images were analyzed volumetrically to determine the amount of gutta-percha present in every 2 mm segment of the canal. P values < 0.05 were considered to indicate statistical significance. Results: The overall mean volume fraction of gutta-percha was 68.51 ± 6.75% for CL, 86.56 ± 5.00% for UL, and 88.91 ± 5.16% for WV. Significant differences were found between CL and UL and between CL and WV (p < 0.05), but not between UL and WV (p = 0.526). The gutta-percha density of the roots treated with WV and UL increased towards the coronal aspect, but this trend was not noted in the CL group. Conclusions: WV compaction and UL compaction produced a significantly denser gutta-percha root filling than CL compaction. The density of gutta-percha was observed to increase towards the coronal aspect when the former two techniques were used.
참고문헌 (29)
- Schilder H., "Filling root canals in three dimensions", Dent Clin North Am, 11, pp.723~744 (1967)
- Lea CS, "Comparison of the obturation density of cold lateral compaction versus warm vertical compaction using the continuous wave of condensation technique", J Endod, 31, pp.37~39 (2005)
- Gulabivala K, "An in vitro comparison of thermoplasticised gutta-percha obturation techniques with cold lateral condensation", Endod Dent Traumatol, 14, pp.262~269 (1998)
- Whitworth J., "Methods of filling root canals: principles and practices", Endod Topics, 12, pp.2~24 (2005)
- Collins J, "A comparison of three gutta-percha obturation techniques to replicate canal irregularities", J Endod, 32, pp.762~765 (2006)
- Goldberg F, "Effectiveness of different obturation techniques in the filling of simulated lateral canals", J Endod, 27, pp.362~364 (2001)
- Wong M, "Comparison of guttapercha filling techniques, compaction (mechanical), vertical (warm), and lateral condensation techniques, Part 1", J Endod, 7, pp.551~558 (1981)
- Holcomb JQ, "Further investigation of spreader loads required to cause vertical root fracture during lateral condensation", J Endod, 13, pp.277~284 (1987)
- Saw LH, "Root strains associated with different obturation techniques", J Endod, 21, pp.314~320 (1995)
- Moreno A., "Thermomechanically softened gutta-percha root canal filling", J Endod, 3, pp.186~188 (1977)
- Baumgardner KR, "Ultrasonic condensation of gutta-percha: an in vitro dye penetration and scanning electron microscopic study", J Endod, 16, pp.253~259 (1990)
- Deitch AK, "A comparison of fill density obtained by supplementing cold lateral condensation with ultrasonic condensation", J Endod, 28, pp.665~667 (2002)
- Bailey GC, "Root canal obturation by ultrasonic condensation of gutta-percha. Part II: an in vitro investigation of the quality of obturation", Int Endod J, 37, pp.694~698 (2004)
- Bailey GC, "Ultrasonic condensation of gutta-percha: the effect of power setting and activation time on temperature rise at the root surface – an in vitro study", Int Endod J, 37, pp.447~454 (2004)
- Sweatman TL, "Radicular temperatures associated with thermoplasticized guttapercha", J Endod, 27, pp.512~515 (2001)
- Rhodes JS, "Micro-computed tomography: a new tool for Ho ESS et al. experimental endodontology", Int Endod J, 32, pp.165~170 (1999)
- Fan B, "C-shaped canal system in mandibular second molars: part I –anatomical features", J Endod, 30, pp.899~903 (2004)
- Peters OA, "Effects of four Ni-Ti preparation techniques on root canal geometry assessed by micro-computed tomography", Int Endod J, 34, pp.221~230 (2001)
- Zogheib C, "Comparative microcomputed tomographic evaluation of two carrier-based obturation systems", Clini Oral Investig, 17, pp.1879~1883 (2013)
- Somma F, "Quality of thermoplasticized and single point root fillings assessed by microcomputed tomography", Int Endod J, 44, pp.362~369 (2011)
- Gandolfi MG, "3D micro-CT analysis of the interface voids associated with Thermafil root fillings used with AH Plus or a flowable MTA sealer", Int Endod J, 46, pp.253~263 (2013)
- Zaslansky P, "Identification of root filling interfaces by microscopy and tomography methods", Int Endod J, 44, pp.395~401 (2011)
- Pruett JP, "Cyclic fatigue testing of nickel-titanium endodontic instruments", J Endod, 23, pp.77~85 (1997)
- Chandler NP., "Harty’s endodontics in clinical practice", pp.131~157 (2010), Elsevier
- Ruddle CJ., "Three-dimensional obturation of the root canal system", Dent Today, 11, pp.28~33 (1992)
- Wu MK, "A preliminary study of the percentage of gutta-percha-filled area in the apical canal filled with vertically compacted warm gutta-percha", Int Endod J, 35, pp.527~535 (2002)
- Smith RS, "Effect of varying the depth of heat application on the adaptability of gutta-percha during warm vertical compaction", J Endod, 26, pp.668~672 (2000)
- Wu MK, "A primary observation on the preparation and obturation of oval canals", Int Endod J, 34, pp.137~141 (2001)
- Brayton SM, "Gutta-percha root canal fillings. An in vitro analysis. I", Oral Surg Oral Med Oral Pathol, 35, pp.226~231 (1973)