H∞ filter for flexure deformation and lever arm effect compensation in M/S INS integration
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
On ship, especially on large ship, the flexure deformation between Master (M)/Slave (S) Inertial Naviga-tion System (INS) is a key factor which determines the accuracy of the integrated system of M/S INS. In engineering this flexure deformation will be increased with the added ship size. In the M/S INS integrated system, the attitude error between MINS and SINS cannot really reflect the misalignment angle change of SINS due to the flexure deformation. At the same time, the flexure deformation will bring the change of the lever arm size, which further induces the uncertainty of lever arm velocity, resulting in the velocity matching error. To solve this problem, a H∞ algorithm is proposed, in which the attitude and velocity matching error caused by deformation is considered as measurement noise with limited energy, and measurement noise will be restrained by the robustness of H∞ filter. Based on the classical “attitude plus velocity” matching method, the progress of M/S INS information fusion is simulated and compared by using three kinds of schemes, which are known and unknown flexure deformation with standard Kalman filter, and unknown flexure deformation with H∞ filter, respectively. Simulation results indicate that H∞ filter can effectively improve the accuracy of information fusion when flexure deformation is unknown but non-ignorable.
Abstract
On ship, especially on large ship, the flexure deformation between Master (M)/Slave (S) Inertial Naviga-tion System (INS) is a key factor which determines the accuracy of the integrated system of M/S INS. In engineering this flexure deformation will be increased with the added ship size. In the M/S INS integrated system, the attitude error between MINS and SINS cannot really reflect the misalignment angle change of SINS due to the flexure deformation. At the same time, the flexure deformation will bring the change of the lever arm size, which further induces the uncertainty of lever arm velocity, resulting in the velocity matching error. To solve this problem, a H∞ algorithm is proposed, in which the attitude and velocity matching error caused by deformation is considered as measurement noise with limited energy, and measurement noise will be restrained by the robustness of H∞ filter. Based on the classical “attitude plus velocity” matching method, the progress of M/S INS information fusion is simulated and compared by using three kinds of schemes, which are known and unknown flexure deformation with standard Kalman filter, and unknown flexure deformation with H∞ filter, respectively. Simulation results indicate that H∞ filter can effectively improve the accuracy of information fusion when flexure deformation is unknown but non-ignorable.
참고문헌 (18)
- Gao, Q. W., "Transfer alignment error compensator design for flexure and lever-arm effect", 4th IEEE Conference on Industrial Electronics and Applications, pp.1819~1822 (2009)
- Goshen-Meskin, D., "Observability analysis of piece-wise constant systems. Part I: Theory", IEEE Transaction on Aerospace and Electronic Systems, 28(4), pp.1056~1067 (1992)
- Goshen-Meskin, D., "Observability analysis of piece-wise constant system. Part II: Application to inertial navigation in-flight alignment", IEEE Transactions on Aerospace and Electronic Systems, 28(4), pp.1068~1075 (1992)
- Grewal, M. S., "Application of Kalman filtering to the calibration and alignment of inertial navigation systems", IEEE Transactions on Automatic Control, 36(1), pp.3~13 (1991)
- Hu, J., "Comparison on two methods of transfer alignment with carrier flexure", Chinese Inertial Technology Transaction, 13(4), pp.15~18 (2005)
- Huang, K., "Angular rate matching method for shipboard transfer alignment", Journal of Chinese Inertial Technology, 13(4), pp.1~5 (2005)
- Hong, S., "Experimental study on the estimation of lever arm in GPS", INS, 2006, pp.55(2), 431~448
- Lim, Y.C., "Transfer alignment error compensator design using H∞ filter", Proceedings of the American Control Conference, pp.1460~1465 (2002)
- Liu, C., "Estimate dynamic lever-arm caused by ship flexure deformation based on ac-celeration matching", 2011 30th Chinese Control Conference, pp.1476~1481 (2011)
- Lyou, J., "Transfer alignment error compensator design based on robust state estimation", Transactions of the Japan Society for Aeronautical and Space Sciences, 48(61), pp.143~151 (2005)
- 류준, "Transfer alignment considering measurement time delay and ship body flexure", Journal of Mechanical Science and Technology, 23(1), pp.195~203 (2009), 대한기계학회
- Kain, J.E., "Rapid transfer alignment for tactical weapon application", AIAA Guidance, Navigation and Control Conference, pp.1290~1330 (1989)
- Shortelle, K. J., "F-16 flight tests of a rapid transfer alignment procedure", IEEE Con-ference on Position Location and Navigation Symposium, pp.379~386 (1998)
- Titterton, D.H., "Strapdown inertial navigation technology" (2004), Lavenham Press Ltd
- Wan, D.J., "Initial alignment of inertial navigation" (1998), Southeast University Press
- Wan, D.J., "Summary on removing influence of ship deformation and providing accurate attitude refe-rence for warship", Journal of Chinese Inertial Technology, 13(5), pp.77~83 (2005)
- Xiong, Z. L., "Observability analysis of INS rapid transfer alignment", Proceeding of 6th World Congress on Intelligent Control and Automation, pp.1664~1668 (2006)
- Yu, J. X., "A study of transfer alignment methods of INS", Acta Aeronautica ET Astronatuica SINCA, 9(5), pp.211~217 (1988)