Micro-computed tomographic evaluation of the flow and filling ability of endodontic materials using different test models
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objectives: This study compared the flow and filling of several retrograde filling materials using new different test models. Materials and Methods: Glass plates were manufactured with a central cavity and 4 grooves in the horizontal and vertical directions. Grooves with the dimensions used in the previous study (1 × 1 × 2 mm; length, width, and height respectively) were compared with grooves measuring 1 × 1 × 1 and 1 × 2 × 1 mm. Biodentine, intermediate restorative material (IRM), and mineral trioxide aggregate (MTA) were evaluated. Each material was placed in the central cavity, and then another glass plate and a metal weight were placed over the cement. The glass plate/material set was scanned using micro-computed tomography. Flow was calculated by linear measurements in the grooves. Central filling was calculated in the central cavity (mm3 ) and lateral filling was measured up to 2 mm from the central cavity. Results: Biodentine presented the least flow and better filling than IRM when evaluated in the 1 × 1 × 2 model. In a comparison of the test models, MTA had the most flow in the 1 × 1 × 2 model. All materials had lower lateral filling when the 1 × 1 × 2 model was used. Conclusions: Flow and filling were affected by the size of the test models. Higher grooves and materials with greater flow resulted in lower filling capacity. The test model measuring 1 × 1 × 2 mm showed a better ability to differentiate among the materials.
Abstract
Objectives: This study compared the flow and filling of several retrograde filling materials using new different test models. Materials and Methods: Glass plates were manufactured with a central cavity and 4 grooves in the horizontal and vertical directions. Grooves with the dimensions used in the previous study (1 × 1 × 2 mm; length, width, and height respectively) were compared with grooves measuring 1 × 1 × 1 and 1 × 2 × 1 mm. Biodentine, intermediate restorative material (IRM), and mineral trioxide aggregate (MTA) were evaluated. Each material was placed in the central cavity, and then another glass plate and a metal weight were placed over the cement. The glass plate/material set was scanned using micro-computed tomography. Flow was calculated by linear measurements in the grooves. Central filling was calculated in the central cavity (mm3 ) and lateral filling was measured up to 2 mm from the central cavity. Results: Biodentine presented the least flow and better filling than IRM when evaluated in the 1 × 1 × 2 model. In a comparison of the test models, MTA had the most flow in the 1 × 1 × 2 model. All materials had lower lateral filling when the 1 × 1 × 2 model was used. Conclusions: Flow and filling were affected by the size of the test models. Higher grooves and materials with greater flow resulted in lower filling capacity. The test model measuring 1 × 1 × 2 mm showed a better ability to differentiate among the materials.
참고문헌 (35)
- Adl A, "Evaluation of the dislodgement resistance of a new pozzolan-based cement(EndoSeal MTA)compared to ProRoot MTA and Biodentine in the presence and absence of blood", Scanning, 2019, pp.3863069~ (2019)
- Küçükkaya Eren S, "Effect of placement technique on the push-out bond strength of calcium-silicate based cements", Dent Mater J, 35, pp.742~747 (2016)
- Parirokh M, "Mineral trioxide aggregate: a comprehensive literature review--Part I: chemical, physical, and antibacterial properties", J Endod, 36, pp.16~27 (2010)
- Jussaro Alves Duque, "Effect of ultrasonic agitation on push-out bond strength and adaptation of root-end filling materials", Restorative Dentistry and Endodontics, 43(2), pp.1~9 (2018), 대한치과보존학회
- Küçükkaya Eren S, "Adaptation of mineral trioxide aggregate to dentine walls compared with other root-end filling materials : a systematic review", Aust Endod J, 45, pp.111~121 (2019)
- Payal Saxena, "Biocompatibility update", Restorative Dentistry and Endodontics, 38(3), pp.119~127 (2013), 대한치과보존학회[DOI]
- Makbule Bilge Akbulut, "Effects of four novel root-end filling materials on the viability of periodontal ligament fibroblasts", Restorative Dentistry and Endodontics, 43(3), pp.1~12 (2018), 대한치과보존학회[DOI]
- Kohli MR, "Outcome of endodontic surgery : a meta-analysis of the literature-part 3 : comparison of endodontic microsurgical techniques with 2 different root-end filling materials", J Endod, 44, pp.923~931 (2018)
- Al-Haddad A, "Interfacial adaptation and thickness of bioceramic-based root canal sealers", Dent Mater J, 34, pp.516~521 (2015)
- 송유석, "In vitro evaluation of a newly produced resin-based endodontic sealer", Restorative Dentistry and Endodontics, 41(3), pp.189~195 (2016), 대한치과보존학회
- Almeida JF, "Filling of artificial lateral canals and microleakage and flow of five endodontic sealers", Int Endod J, 40, pp.692~699 (2007)
- Tanomaru-Filho M, "A novel model for evaluating the flow of endodontic materials using micro-computed tomography", J Endod, 43, pp.796~800 (2017)
- International Organization for Standardization, "ISO 6876 : Dental root canal sealing materials", International Organization for Standardization, ~ (2012)
- 김경재, "A micro-computed tomographic study of remaining filling materials of two bioceramic sealers and epoxy resin sealer after retreatment", Restorative Dentistry and Endodontics, 44(2), pp.1~9 (2019), 대한치과보존학회[DOI]
- 장지현, "In vitro characterization of human dental pulp stem cells isolated by three different methods", Restorative Dentistry and Endodontics, 41(4), pp.283~295 (2016), 대한치과보존학회
- Duarte MA, "Influence of calcium hydroxide association on the physical properties of AH Plus", J Endod, 36, pp.1048~1051 (2010)
- 김지아, "Evaluation of reparative dentin formation of ProRoot MTA, Biodentine and BioAggregate using micro-CT and immunohistochemistry", Restorative Dentistry and Endodontics, 41(1), pp.29~36 (2016), 대한치과보존학회
- Enrique Oltra, "Retreatability of two endodontic sealers, EndoSequence BC Sealer and AH Plus: a micro-computed tomographic comparison", Restorative Dentistry and Endodontics, 42(1), pp.19~26 (2017), 대한치과보존학회
- Torres FF, "Solubility, porosity and fluid uptake of calcium silicate-based cements", J Appl Oral Sci, 26, pp.e20170465~ (2018)
- Torres FF, "Solubility, porosity, dimensional and volumetric change of endodontic sealers", Braz Dent J, 30, pp.368~373 (2019)
- Kallaya Yanpiset, "Bacterial leakage and micro-computed tomography evaluation in round-shaped canals obturated with bioceramic cone and sealer using matched single cone technique", Restorative Dentistry and Endodontics, 43(3), pp.1~12 (2018), 대한치과보존학회[DOI]
- Peralta SL, "Evaluation of physical-mechanical properties, antibacterial effect, and cytotoxicity of temporary restorative materials", J Appl Oral Sci, 26, pp.e20170562~ (2018)
- Tsesis I, "Bacterial colonization in the apical part of extracted human teeth following root-end resection and filling : a confocal laser scanning microscopy study", Clin Oral Investig, 22, pp.267~274 (2018)
- Aksel H, "Surface and vertical dimensional changes of mineral trioxide aggregate and biodentine in different environmental conditions", J Appl Oral Sci, 27, pp.e20180093~ (2018)
- Biočanin V, "Marginal gaps between 2 calcium silicate and glass ionomer cements and apical root dentin", J Endod, 44, pp.816~821 (2018)
- Makbule Bilge Akbulut, "The push-out bond strength of BIOfactor mineral trioxide aggregate, a novel root repair material", Restorative Dentistry and Endodontics, 44(1), pp.1~9 (2019), 대한치과보존학회[DOI]
- Küçükkaya Eren S, "Obturation quality of calcium silicate-based cements placed with different techniques in teeth with perforating internal root resorption : a micro-computed tomographic study", Clin Oral Investig, 23, pp.805~811 (2019)
- Torres FF, "Evaluation of physicochemical properties of root-end filling materials using conventional and Micro-CT tests", J Appl Oral Sci, 25, pp.374~380 (2017)
- Tang JJ, "A comparison of the sealing abilities between Biodentine and MTA as root-end filling materials and their effects on bone healing in dogs after periradicular surgery", J Appl Oral Sci, 27, pp.e20180693~ (2019)
- Yilmaz A, "Evaluation of dentin defect formation during retreatment with hand and rotary instruments : a micro-CT study", Scanning, 2017, pp.4868603~ (2017)
- Camilleri J, "Investigation of the hydration and bioactivity of radiopacified tricalcium silicate cement, Biodentine and MTA Angelus", Dent Mater, 29, pp.580~593 (2013)
- Ber BS, "Chemical modification of proroot mta to improve handling characteristics and decrease setting time", J Endod, 33, pp.1231~1234 (2007)
- Hsieh SC, "A novel accelerator for improving the handling properties of dental filling materials", J Endod, 35, pp.1292~1295 (2009)
- Duarte MA, "Evaluation of the propylene glycol association on some physical and chemical properties of mineral trioxide aggregate", Int Endod J, 45, pp.565~570 (2012)
- Brichko J, "Design variability of the push-out bond test in endodontic research : a systematic review", J Endod, 44, pp.1237~1245 (2018)