Simulation of a two-stroke diesel engine for propulsion in waves
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Propulsion in waves is a complex physical process that involves interactions between a hull, a propeller, a shaft and a prime mover which is often a diesel engine. Among the relevant components, the diesel engine plays an important role in the overall system dynamics. Therefore, using a proper model for the diesel engine is essential to achieve the reasonable accuracy of the transient simulation of the entire system. In this paper, a simulation model of a propulsion system in waves is presented with emphasis on modeling a two-stroke marine diesel engine: the framework for building such a model and its mathematical descriptions. The models are validated against available measurement data, and a sensitivity analysis for the transient performance of the diesel engine is carried out. Finally, the results of the system simulations under various wave conditions are analyzed to understand the physical processes and compare the efficiency for different cases.
Abstract
Propulsion in waves is a complex physical process that involves interactions between a hull, a propeller, a shaft and a prime mover which is often a diesel engine. Among the relevant components, the diesel engine plays an important role in the overall system dynamics. Therefore, using a proper model for the diesel engine is essential to achieve the reasonable accuracy of the transient simulation of the entire system. In this paper, a simulation model of a propulsion system in waves is presented with emphasis on modeling a two-stroke marine diesel engine: the framework for building such a model and its mathematical descriptions. The models are validated against available measurement data, and a sensitivity analysis for the transient performance of the diesel engine is carried out. Finally, the results of the system simulations under various wave conditions are analyzed to understand the physical processes and compare the efficiency for different cases.
참고문헌 (27)
- A. Albrecht, "Towards a Stronger Simulation Support for Engine Control Design: a Methodological Point of View", Oil & Gas Science and Technology - Revue de l'IFP, 62(4), pp.437~456 (2007), EDP Sciences[DOI]
- Annand, Walter John Dinnie, "Gas Flow in the Internal Combustion Engine: Power, Performance, Emission Control, and Silencing" (1974), GT Foulis
- Benson, R.S., "The compressible flow discharge coefficients for a two-dimensional slit", Int. J. Mech. Sci, 7(5), pp.337~353 (1965)
- Bergman, Theodore L., "Fundamentals of heat and mass transfer", Dekker Mechanical Engineering, 6 (2007), John Wiley & Sons
- Campora, U, "Numerical simulation of ship propulsion transients and full-scale validation", Proc. Inst. Mech. Eng. Part M J. Eng. Marit. Environ, 217(1), pp.41~52 (2005)[DOI]
- Churchill, S.W, "A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow", J. Heat Transf, 99(2), pp.300~306 (1977)[DOI]
- Ould el Moctar, "RANS-Based Simulated Ship Maneuvering Accounting for Hull-Propulsor-Engine Interaction", Ship Technology Research, 61(3), pp.142~161 (2015), Informa UK Limited[DOI]
- Faltinsen, O. M., "Prediction of resistance and propulsion of a ship in a seaway", 13th Symposium on Naval Hydrodynamics (1980), The Shipbuilding Research Association of Japan
- C A Finol, "Thermal modelling of modern engines: A review of empirical correlations to estimate the in-cylinder heat transfer coefficient", Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 220(12), pp.1765~1781 (2006), SAGE Publications[DOI]
- J I Ghojel, "Review of the development and applications of the Wiebe function: A tribute to the contribution of Ivan Wiebe to engine research", International Journal of Engine Research, 11(4), pp.297~312 (2010), SAGE Publications[DOI]
- "JavaFoil" (2007)[URL]
- Heywood, J. B., "Internal Combustion Engine Fundamentals" (1988), McGraw Hill
- Karnopp, Dean, "State variables and pseudo bond graphs for compressible thermofluid systems", National Conference Publication e Institution of Engineers, pp.861~865 (1979)
- Kyrtatos, N. P., "Simulation of the overall ship propulsion plant for performance prediction and control", MarPower99 Conference (1999)
- Loukakis, T. A., "Some extensions of the classical approach to strip theory of ship motions, including the calculation of mean added forces and moments", J. Ship Res, 22(1) (1978)
- Minsaas, K., "On the importance of added resistance, propeller immersion and propeller ventilation for large ships in a seaway", Second International Symposium on Practical Design in Shipbuilding (PRADS), pp.149~159 (1983)
- Papanikolaou, A., "Energy efficient Safe ship operation (Shopera)", Influ. EEDI Ship Des, 1(2012), pp.24~25 (2014)
- Pedersen, Eilif, "A bond graph model library for modelling diesel engine transient performance", ISME Tokyo 2000, 2, pp.447~455 (2000)
- Review of thermodynamic diesel engine simulations under transient operating conditions, "Rakopoulos, Constantine D.", SAE, 884~, pp.SAE Paper (2006-01) (2006)
- Sher, E., "Scavenging the two-stroke engine", Prog. Energy Combust. Sci, 16(2), pp.95~124 (1990)
- Bhushan Taskar, "The effect of waves on engine-propeller dynamics and propulsion performance of ships", Ocean Engineering, 122, pp.262~277 (2016), Elsevier BV[DOI]
- "General Technical Data" (2015)[URL]
- Wu, Ping-Chen, "A CFD Study on Added Resistance, Motions and Phase Averaged Wake Fields of Full Form Ship Model in Head Waves", Doctor, pp.2013
- Yang, Jianguo, "Diesel Engine e Combustion, Emissions and Condition Monitoring, Chapter 10", pp.278~ (2013), InTech
- Yum, K. K., "Architecture of Model Libraries for Modeling Internal Combustion Engines", Mathematical and Computer Modelling of Dydnamical Systems (Submitted for review) (2016)
- Yum, Kevin Koosup, "Simulation of a Hybrid marine propulsion system in waves", Proceedings of 28th CIMAC World Congress (2016), CIMAC
- Analytical representation of the thermodynamic properties of combustion gases, "Zacharias, F", SAE, ~, pp.SAE Technical Paper, 670930 (1967)
