A RANS modelling approach for predicting powering performance of ships in waves
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, a modelling technique for simulating self-propelled ships in waves is presented. The flow is modelled using a RANS solver coupled with an actuator disk model for the propeller. The motion of the ship is taken into consideration in the definition of the actuator disk region as well as the advance ratio of the propeller. The RPM of the propeller is controlled using a PID-controller with constraints added on the maximum permissible RPM increase rate. Results are presented for a freely surging model in regular waves with different constraints put on the PID-con-troller. The described method shows promising results and allows for the studying of several factors relating to self-propulsion. However, more validation data is needed to judge the accuracy of the model.
Abstract
In this paper, a modelling technique for simulating self-propelled ships in waves is presented. The flow is modelled using a RANS solver coupled with an actuator disk model for the propeller. The motion of the ship is taken into consideration in the definition of the actuator disk region as well as the advance ratio of the propeller. The RPM of the propeller is controlled using a PID-controller with constraints added on the maximum permissible RPM increase rate. Results are presented for a freely surging model in regular waves with different constraints put on the PID-con-troller. The described method shows promising results and allows for the studying of several factors relating to self-propulsion. However, more validation data is needed to judge the accuracy of the model.
참고문헌 (18)
- Kt, Kq and efficiency curves for the Wageningen B-series propellers, Technical report, "Bernitsas, M.", Department of Naval Architecture and Marine Engineering College, The University of Michigan, ~ (1981)
- Carrica, P., "Turn and zigzag maneuvers of a surface combatant using a URANS approach with dynamic overset grids", Journal of Marine Science and Technology, 18, pp.166~181 (2013)
- Carrica, P., "URANS analysis of a broaching event in irregular quartering Seas", Journal of Marine Science and Technology, 13, pp.395~407 (2008)
- Goldstein, S., "On the vortex theory of screw propellers", Proceedings of the Royal Society of London, 123(792), pp.440~465 (1929)
- MARPOL annex VI energy efficiency amendments, "IMO", IMO, ~, pp.Resolution MEPC 203(62) (2011)
- Jacobsen, N. G., "A wave generation toolbox for the open-source CFD library: OpenFoam©", International Journal Numerical Methods in Fluids, 70, pp.1073~1088 (2012)
- Experiments and calculations on 4Wigley hull forms in head waves, "Journée, J.", Delft university of Technology, ~, pp.Report 0909 (1992)
- Kashima, T., "An optimal control of marine propulsion system considering ship dynamics", Pro-ceedings of the 2002 IEEE International Conference on Control Applications, pp.1058~1063 (2002)
- Kjellberg, M., "Fully nonlinear unsteady three-dimensional boundary element method for force predictions on a res-trained hull in waves", 석사, pp.2011
- Larsson, L., "Numerical ship hydrodynamics", An assessment of the Gothenburg 2010 Workshop, pp.185~ (2014), Springer
- Menter, F., "Ten years of industrial experience with the SST turbulence model", Heat and Mass Transfer, 4, pp.625~632 (2003)
- Molland, A., "Ship resistance and propulsion: practical estimation of ship propulsive power" (2011), Cambridge University Press
- Phillips, A., "Evaluation of manoeuvring coefficients of a self-propelled ship using a blade element momentum propeller model coupled to a Reynolds averaged Navier Stokes flow solver", Ocean Engi-neering, 36(15-16), pp.1217~1225 (2009)
- Phillips, A., "Accurate capture of rudder-propeller interaction using a coupled blade element momentum-RANS approach", Ship Technology Research(Schiffstechnik), 57(2), pp.128~139 (2010)
- Windén, B., "Powering performance of ships in waves. M.Phil", Ph, University of Southampton, 2012
- Windén, B., "Validating force calculations using OpenFOAM© on a Fixed Wigley hull in waves", Proceedings of the 15th Numerical Towing Tank Symposium, pp.170~175 (2012)
- Windén, B., "Predicting powering performance changes for ships in offshore conditions from small design modifications. In Proceedings of the 23rd International Offshore and Polar Engineering Conference (ISOPE13)", Proceedings of the 23rd International Offshore and Polar Engineering Conference(ISOPE13), Anchorage, Alaska, June 30-July 5 2013, pp.773~780 (2013)
- Xiros, N., "Robust control of diesel ship propulsion" (2002), Springer-Verlag