Experimental study on the asymmetric impact loads and hydroelastic responses of a very large container ship
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper presents an experimental investigation of asymmetric impact effects on hydroelastic responses. A 1:64 scaled segmented ship model with U-shape open cross-section backbone was newly designed to meet elastic similarity conditions of vertical, horizontal and torsional stiffness simultaneously. Different wave heading angles and wavelengths were adopted in regular wave test. In head wave condition, parametric rolling phenomena happened along with asymmetric slamming forces, the relationship between them was disclosed at first time. The impact forces on starboard and port sides showed alternating asymmetric periodic changes. In oblique wave condition, nonlinear springing and whipping responses were found. Since slamming phenomena occurred, high-frequency bending moments became an important part in total bending moments and whipping responses were found in small wavelength. The wavelength and head angle are varied to elucidate the relationship of springing/ whipping loads and asymmetric impact. The distributions of peaks of horizontal and torsional loads show highly asymmetric property.
Abstract
This paper presents an experimental investigation of asymmetric impact effects on hydroelastic responses. A 1:64 scaled segmented ship model with U-shape open cross-section backbone was newly designed to meet elastic similarity conditions of vertical, horizontal and torsional stiffness simultaneously. Different wave heading angles and wavelengths were adopted in regular wave test. In head wave condition, parametric rolling phenomena happened along with asymmetric slamming forces, the relationship between them was disclosed at first time. The impact forces on starboard and port sides showed alternating asymmetric periodic changes. In oblique wave condition, nonlinear springing and whipping responses were found. Since slamming phenomena occurred, high-frequency bending moments became an important part in total bending moments and whipping responses were found in small wavelength. The wavelength and head angle are varied to elucidate the relationship of springing/ whipping loads and asymmetric impact. The distributions of peaks of horizontal and torsional loads show highly asymmetric property.
참고문헌 (31)
- Alagan Chella, M., "An overview of wave impact forces on offshore wind turbine substructures", Energy Procedia, 20, pp.217~226 (2012)
- Chen, Z., "Time-domain numerical and segmented ship model experimental analyses of hydroelastic responses of a large container ship in oblique regular waves", Appl. Ocean Res, 67, pp.78~93 (2017)
- Ding, J., "Experimental investigations of springing and slamming responses of an ultra-VLCC", J. Ship Mech, 19(1-2), pp.144~151 (2015)
- Drummen, I., "Experimental and numerical study of containership responses in severe head seas", Mar. Struct, 22(2), pp.172~193 (2009)
- Faltinsen, O. M., "Sea Loads on Ships and Offshore Structures" (1993), Cambridge University Press
- Faltinsen, O. M., "Hydrodynamics of High-Speed Marine Vehicles" (2005), Cambridge University Press
- 홍사영, "Experimental investigations of higher-order springing and whipping-WILS project", International Journal of Naval Architecture and Ocean Engineering, 6(4), pp.1160~1181 (2014), 대한조선학회
- Hong, S. Y., "Experimental study on torsion springing and whipping of a large container ship", Int. J. Offshore Polar Eng, 22(2), pp.97~107 (2012)
- Hong, S. Y., "An experimental investigation on bow slamming loads on an ultra-large container ship", 7th International Conference on Hydroelasticity in Marine Technology, pp.229~244 (2015)
- Houtani, H., "Designing a hydro-structural model ship to experimentally measure its vertical-bending and torsional vibrations", 8th International Conference on Hydroelasticity in Marine Technology, pp.53~62 (2018)
- Iijima, K., "Symmetric and antisymmetric vibrations of hydroelastically scaled model", The 5th International Conference on Hydroelasticity in Marine Technology, pp.173~182 (2009)
- ITTC, "Report of the seakeeping committee", The 28th International Towing Tank Conference (2017)
- Jiao, J., "A state of the art large scale model testing technique for ship hydrodynamics at sea", Ocean Eng, 123, pp.174~190 (2016)
- Jiao, J., "Development of a shipboard remote control and telemetry experimental system for large-scale model's motions and loads measurement in realistic sea waves", Sensors, 17(11), pp.1~26 (2017)
- Jiao, J., "A comprehensive study on the seakeeping performance of high speed hybrid ships by 2.5d theoretical calculation and different scaled model experiments", Ocean Eng, 160, pp.197~223 (2018)
- Jiao, J., "Time-domain hydroelastic analysis of nonlinear motions and loads on a large bow flare ship in high irregular seas", J. Mar. Sci. Technol, 1(29) (2019)[DOI]
- Jialong Jiao, "A comprehensive study on ship motion and load responses in short-crested irregular waves", International Journal of Naval Architecture and Ocean Engineering, 11(1), pp.364~379 (2019), 대한조선학회[DOI]
- Jiao, J., "Time-domain numerical and segmented model experimental study on ship hydroelastic responses and whipping loads in harsh irregular seaways", Ocean Eng, 185, pp.59~81 (2019)
- Kim, J. H., "Parametric study of numerical prediction of slamming and whipping and an experimental validation for a 10, 000-TEU containership", Proceedings of the Twenty-Fifth International Ocean and Polar Engineering Conference, pp.96~103 (2015)
- Li, H., "3-D Hydroelasticity Analysis Method for Wave Loads of Ship", Ph.D, pp.2009
- Liu, J., "Structural Dynamics", pp.46~48 (2005), China Marine Press
- Adolfo Marón, "Design of a ship model for hydro-elastic experiments in waves", International Journal of Naval Architecture and Ocean Engineering, 6(4), pp.1130~1147 (2014), 대한조선학회
- Rajendran, S., "Numerical investigation of the vertical response of a containership in large amplitude waves", Ocean Eng, 123, pp.440~451 (2016)
- Remy, F., "Experimental and numerical study of wave response of a flexible barge", The 4th International Conference on Hydroelasticity in Marine Technology, pp.255~264 (2006)
- Semenov, Y. A., "On the nonlinear water entry problem of asymmetric wedges", J. Fluid Mech, 547(547), pp.231~256 (2006)
- Senjanovic, I., "Application of 1D FEM & 3D BEM hydroelastic model for stress concentration assessment in large container ships", Brodogradnja, 63(4), pp.307~317 (2012)
- Wang, S., "Asymmetrical water impact of two-dimensional wedges with roll angle with multi-material eulerian formulation", Int. J. Maritime Eng, 156(A2), pp.115~130 (2014)
- Wang, S., "Experimental and numerical study of the slamming load on the bow of a chemical tanker in irregular waves", Ocean Eng, 111, pp.369~383 (2016)
- Xu, G. D., "Numerical simulation of oblique water entry of an asymmetrical wedge", Ocean Eng, 35(16), pp.1597~1603 (2008)
- Zhao, N., "Design of open backbone of segmented model for wave load experiment", Ship Ocean Eng, 46(4), pp.7~11 (2017)
- Zhu, S., "Experimental investigation of hull girder vibrations of a flexible backbone model in bending and torsion", Appl. Ocean Res, 33(4), pp.252~274 (2011)