Cortical lag screw fixation for the management of mandibular injuries
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: Here, we present cases of mandibular fracture that were managed with the cortical lag screw fixation technique (CLSFT) in order to critically evaluate technique indications and limitations of application at various fracture sites. Materials and Methods: This was a retrospective cohort study. The study sample was composed of patients suffering from mandibular fractures that were treated by the CLSFT. The outcome variables were fracture type, duration of surgery, number of screws, and pattern of application. Other study categories included patient demographics and causes of injury. Chi-square tests were used to assess descriptive and inferential statistical differences, and the P-value was set at 0.05. Results: Thirty-three patients were included in the study sample, with a mean age of 30.9±11.5 years and a male predominance of 81.8%. The technique was applied more frequently in the anterior mandibular region (51.5%) than in other sites. Double CLSFT screws were required at the symphysis and parasymphysis, while single screws were used for body and angle regions. No intraoperative and postoperative variables were significantly different except for surgical duration, which was significantly different between the sites studied (P=0.035). Conclusion: We found that CLSFT is a rapid, cost-effective technique for the fixation of mandibular fractures yielding good treatment results and very limited complications. However, this technique is sensitive and requires surgical expertise to be applied to mandibular fractures that have specialized characteristics.
Abstract
Objectives: Here, we present cases of mandibular fracture that were managed with the cortical lag screw fixation technique (CLSFT) in order to critically evaluate technique indications and limitations of application at various fracture sites. Materials and Methods: This was a retrospective cohort study. The study sample was composed of patients suffering from mandibular fractures that were treated by the CLSFT. The outcome variables were fracture type, duration of surgery, number of screws, and pattern of application. Other study categories included patient demographics and causes of injury. Chi-square tests were used to assess descriptive and inferential statistical differences, and the P-value was set at 0.05. Results: Thirty-three patients were included in the study sample, with a mean age of 30.9±11.5 years and a male predominance of 81.8%. The technique was applied more frequently in the anterior mandibular region (51.5%) than in other sites. Double CLSFT screws were required at the symphysis and parasymphysis, while single screws were used for body and angle regions. No intraoperative and postoperative variables were significantly different except for surgical duration, which was significantly different between the sites studied (P=0.035). Conclusion: We found that CLSFT is a rapid, cost-effective technique for the fixation of mandibular fractures yielding good treatment results and very limited complications. However, this technique is sensitive and requires surgical expertise to be applied to mandibular fractures that have specialized characteristics.
참고문헌 (38)
- Goyal M, "A comparative evaluation of fixation techniques in anterior mandibular fractures using 2.0 mm monocortical titanium miniplates versus 2.4 mm cortical titanium lag screws", J Maxillofac Oral Surg, 11, pp.442~450 (2012)[DOI]
- Tiwari M, "Titanium lag screw versus miniplate fixation in the treatment of anterior mandibular fractures", J Oral Maxillofac Surg, 77, pp.1031~1039 (2019)[DOI]
- Emam HA, "Can an arch bar replace a second lag screw in management of anterior mandibular fractures", J Oral Maxillofac Surg, 70, pp.378~383 (2012)[DOI]
- Kim MR, "Prognosis following the lag-screw fixation for the fractured mandibular condyle", J Korean Assoc Oral Maxillofac Surg, 23, pp.696~703 (1997)
- Brons R, "Fractures of the mandibular body treated by stable internal fixation : a preliminary report", J Oral Surg, 28, pp.407~415 (1970)
- Ellis E, "Lag screw fixation of anterior mandibular fractures", J Oral Maxillofac Surg, 49, pp.13~21 (1991)[DOI]
- Agnihotri A, "A comparative analysis of the efficacy of cortical screws as lag screws and miniplates for internal fixation of mandibular symphyseal region fractures : a randomized prospective study", Int J Oral Maxillofac Surg, 43, pp.22~28 (2014)[DOI]
- Serletti JM, "Transverse lag screw fixation in midline mandibulotomy : a case series revisited", Plast Reconstr Surg, 114, pp.178~185 (2004)[DOI]
- Thoma KH, "Methods of fixation of jaw fractures and their indications", J Oral Surg(Chic), 6, pp.125~134 (1948)
- Terheyden H, "Self-adapting washer system for lag screw fixation of mandibular fractures. Part II: in vitro mechanical characterization of 2.3 and 2.7mm lag screw prototypes and in vivo removal torque after healing", J Craniomaxillofac Surg, 27, pp.243~251 (1999)[DOI]
- Rao E, "Principle of lag-screw fixation in mandibular trauma", J Int Soc Prev Community Dent, 9, pp.282~289 (2019)[DOI]
- Elsayed SA, "Clinical outcomes of three different types of hardware for the treatment of mandibular angle fractures : a comparative retrospective study", Int J Oral Maxillofac Surg, 44, pp.1260~1267 (2015)[DOI]
- Ellis E, "Use of lag screws for fractures of the mandibular body", J Oral Maxillofac Surg, 54, pp.1314~1316 (1996)[DOI]
- Petzel JR, "Stability of the mandibular condylar process after functionally stable traction-screw-osteosynthesis(TSO)with a self-tapping screw-pin", J Maxillofac Surg, 10, pp.149~154 (1982)[DOI]
- Pilling E, "Minimally invasive fracture treatment with cannulated lag screws in intracapsular fractures of the condyle", J Oral Maxillofac Surg, 64, pp.868~872 (2006)[DOI]
- Schneider A, "Lag screw osteosynthesis of fractures of the mandibular condyle : potential benefit of preoperative planning using multiplanar CT reconstruction", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 99, pp.142~147 (2005)[DOI]
- Eckelt U, "Clinical and radiological evaluation following surgical treatment of condylar neck fractures with lag screws", J Craniomaxillofac Surg, 27, pp.235~242 (1999)[DOI]
- Niederdellmann H, "Osteosynthesis of mandibular fractures using lag screws", Int J Oral Surg, 5, pp.117~121 (1976)[DOI]
- Madsen MJ, "A biomechanical evaluation of plating techniques used for reconstructing mandibular symphysis", parasymphysis fractures, 2008, pp.66, 2012~2019
- Kallela I, "Lag-screw fixation of mandibular parasymphyseal and angle fractures", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 82, pp.510~516 (1996)[DOI]
- Kallela I, "Lag-screw osteosynthesis of mandibular condyle fractures : a clinical and radiological study", J Oral Maxillofac Surg, 53, pp.1397~1404 (1995)[DOI]
- Tiwana PS, "Lag screw fixation of anterior mandibular fractures : a retrospective analysis of intraoperative and postoperative complications", J Oral Maxillofac Surg, 65, pp.1180~1185 (2007)[DOI]
- Wusiman P, "Three-dimensional versus standard miniplate, lag screws versus miniplates, locking plate versus non-locking miniplates : management of mandibular fractures, a systematic review and meta-analysis", J Dent Sci, 14, pp.66~80 (2019)[DOI]
- Niederdellmann H, "Lag-screw osteosynthesis : a new procedure for treating fractures of the mandibular angle", J Oral Surg, 39, pp.938~940 (1981)
- Elsayed SAH, "Stabilization of anterior mandibular fracture using different osteosynthesis devices: perioperative clinical notes", Oral Maxillofac Surg (2020)[DOI]
- Ellis E, "Use of a 2.0-mm locking plate", screw system for mandibular fracture surgery, 2002, pp.60, 642~645
- Sauerbier S, "Clinical aspects of a 2.0-mm locking plate system for mandibular fracture surgery", J Craniomaxillofac Surg, 38, pp.501~504 (2010)[DOI]
- Miloro M, "Peterson's principles of oral and maxillofacial surgery" (2004), BC Decker
- Forrest CR, "Application of minimal-access techniques in lag screw fixation of fractures of the anterior mandible", Plast Reconstr Surg, 104, pp.2127~2134 (1999)[DOI]
- 양승빈, "하악 우각부 골절 시 2개의 miniplate를 이용한 관혈적 정복술에 대한 전향적 예비 임상연구", 대한구강악안면외과학회지, 36(4), pp.320~324 (2010), 대한구강악안면외과학회
- 이충현, "악간고정 없는 하악골 골절의 관혈적 정복술: 후향적 연구", 대한구강악안면외과학회지, 37(4), pp.255~263 (2011), 대한구강악안면외과학회
- Motamedi MH, "An assessment of maxillofacial fractures : a 5-year study of 237 patients", J Oral Maxillofac Surg, 61, pp.61~64 (2003)[DOI]
- Iizuka T, "Infection after rigid internal fixation of mandibular fractures: a clinical and radiologic study", J Oral Maxillofac Surg, 49, pp.585~593 (1991)[DOI]
- Miles BA, "The efficacy of postoperative antibiotic regimens in the open treatment of mandibular fractures : aprospective randomized trial", J Oral Maxillofac Surg, 64, pp.576~582 (2006)[DOI]
- 최강영, "Current Concepts in the Mandibular Condyle Fracture Management Part II: Open Reduction Versus Closed Reduction", Archives of Plastic Surgery, 39(4), pp.301~308 (2012), 대한성형외과학회[DOI]
- Chen S, "Width-controlling fixation of symphyseal", parasymphyseal fractures associated with bilateral condylar fractures with 2 2.0-mm miniplates: a retrospective investigation of 45 cases, 2016, pp.74, 315~327
- Nyárády Z, "Transgingival lag-screw osteosynthesis of alveolar process fracture", Int J Oral Maxillofac Surg, 39, pp.779~782 (2010)[DOI]
- "Shanghai Kou Qiang Yi Xue", 2004, 214~216