Stepwise verification of bone regeneration using recombinant human bone morphogenetic protein-2 in rat fibula model
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives: The purpose of this study was to introduce our three experiments on bone morphogenetic protein (BMP) and its carriers performed us-ing the critical sized segmental defect (CSD) model in rat fibula and to investigate development of animal models and carriers for more effective bone regeneration.Materials and Methods: For the experiments, 14, 16, and 24 rats with CSDs on both fibulae were used in Experiments 1, 2, and 3, respectively. BMP-2 with absorbable collagen sponge (ACS) (Experiments 1 and 2), autoclaved autogenous bone (AAB) and fibrin glue (FG) (Experiment 3), and xenogenic bone (Experiment 2) were used in the experimental groups. Radiographic and histomorphological evaluations were performed during the follow-up period of each experiment.Results: Significant new bone formation was commonly observed in all experimental groups using BMP-2 compared to control and xenograft (porcine bone) groups. Although there was some difference based on BMP carrier, regenerated bone volume was typically reduced by remodeling after initially forming excessive bone.Conclusion: BMP-2 demonstrates excellent ability for bone regeneration because of its osteoinductivity, but efficacy can be significantly different depending on its delivery system. ACS and FG showed relatively good bone regeneration capacity, satisfying the essential conditions of localization and release-control when used as BMP carriers. AAB could not provide release-control as a BMP carrier, but its space-maintenance role was remark-able. Carriers and scaffolds that can provide sufficient support to the BMP/carrier complex are necessary for large bone defects, and AAB is thought to be able to act as an effective scaffold. The CSD model of rat fibula is simple and useful for initial estimate of bone regeneration by agents including BMPs.
Abstract
Objectives: The purpose of this study was to introduce our three experiments on bone morphogenetic protein (BMP) and its carriers performed us-ing the critical sized segmental defect (CSD) model in rat fibula and to investigate development of animal models and carriers for more effective bone regeneration.Materials and Methods: For the experiments, 14, 16, and 24 rats with CSDs on both fibulae were used in Experiments 1, 2, and 3, respectively. BMP-2 with absorbable collagen sponge (ACS) (Experiments 1 and 2), autoclaved autogenous bone (AAB) and fibrin glue (FG) (Experiment 3), and xenogenic bone (Experiment 2) were used in the experimental groups. Radiographic and histomorphological evaluations were performed during the follow-up period of each experiment.Results: Significant new bone formation was commonly observed in all experimental groups using BMP-2 compared to control and xenograft (porcine bone) groups. Although there was some difference based on BMP carrier, regenerated bone volume was typically reduced by remodeling after initially forming excessive bone.Conclusion: BMP-2 demonstrates excellent ability for bone regeneration because of its osteoinductivity, but efficacy can be significantly different depending on its delivery system. ACS and FG showed relatively good bone regeneration capacity, satisfying the essential conditions of localization and release-control when used as BMP carriers. AAB could not provide release-control as a BMP carrier, but its space-maintenance role was remark-able. Carriers and scaffolds that can provide sufficient support to the BMP/carrier complex are necessary for large bone defects, and AAB is thought to be able to act as an effective scaffold. The CSD model of rat fibula is simple and useful for initial estimate of bone regeneration by agents including BMPs.
참고문헌 (37)
- Boyne PJ, "Osseous reconstruction of the maxilla and the mandible:surgical techniques using titanium mesh and bone mineral", Implant Dentistry, 7, pp.378~379 (1998)
- Hausamen JE, "Transplantation of bones", Eur Arch Otorhinolaryngol Suppl, 1, pp.163~177 (1992)
- Hopp SG, "A study of the mechanical strength of long bone defects treated with various bone autograft substitutes: an experimental investigation in the rabbit", J Orthop Res, 7, pp.579~584 (1989)
- Dickinson BP, "Reduced morbidity and improved healing with bone morphogenic protein-2 in older patients with alveolar cleft defects", Plast Reconstr Surg, 121, pp.209~217 (2008)
- Fallucco MA, "Primary reconstruction of alveolar clefts using recombinant human bone morphogenic protein-2: clinical and radiographic outcomes", J Craniofac Surg, 20(Suppl 2), pp.1759~1764 (2009)
- Herford AS, "rhBMP-2 as an option for reconstructing mandibular continuity defects", J Oral Maxillofac Surg, 67, pp.2679~2684 (2009)
- Herford AS, "Reconstruction of mandibular continuity defects with bone morphogenetic protein-2 (rhBMP-2)", J Oral Maxillofac Surg, 66, pp.616~624 (2008)
- Hollinger JO, "The critical size defect as an experimental model to test bone repair materials", J Craniofac Surg, 1, pp.60~68 (1990)
- Mapara M, "Rabbit as an animal model for experimental research", Dent Res J, 9, pp.111~118 (2012)
- 최은주, "Bone Healing Properties of Autoclaved Autogenous Bone Grafts Incorporating Recombinant Human Bone Morphogenetic Protein-2 and Comparison of Two Delivery Systems in a Segmental Rabbit Radius Defect", Maxillofacial Plastic Reconstructive Surgery, 36(3), pp.94~102 (2014), 대한악안면성형재건외과학회[DOI]
- Boyne PJ, "A feasibility study evaluating rhBMP-2", absorbable collagen sponge for maxillary sinus floor augmentation, 1997, pp.17, 11~25
- Lee JH, "The induction of bone formation in rat calvarial defects and subcutaneous tissues by recombinant human BMP-2, produced in Escherichia coli", Biomaterials, 31, pp.3512~3519 (2010)
- McKay WF, "A comprehensive clinical review of recombinant human bone morphogenetic protein-2 (INFUSE Bone Graft)", Int Orthop, 31, pp.729~734 (2007)
- Kübler NR, "Inductive properties of recombinant human BMP-2 produced in a bacterial expression system", Int J Oral Maxillofac Surg, 27, pp.305~309 (1998)
- Haidar ZS, "Delivery of recombinant bone morphogenetic proteins for bone regeneration and repair. Part A:current challenges in BMP delivery", Biotechnol Lett, 31, pp.1817~1824 (2009)
- Haidar ZS, "Delivery of recombinant bone morphogenetic proteins for bone regeneration and repair. Part B: delivery systems for BMPs in orthopaedic and craniofacial tissue engineering", Biotechnol Lett, 31, pp.1825~1835 (2009)
- Issa JP, "Sustained release carriers used to delivery bone morphogenetic proteins in the bone healing process", Anat Histol Embryol, 37, pp.181~187 (2008)
- Jung RE, "Bone morphogenetic protein-2 enhances bone formation when delivered by a synthetic matrix containing hydroxyapatite", tricalciumphosphate, 2008, pp.19, 188~195
- Wikesjö UM, "Bone morphogenetic proteins for periodontal and alveolar indications; biological observations--clinical implications", Orthod Craniofac Res, 12, pp.263~270 (2009)
- Han DK, "Effect of a fibrin-fibronectin sealing system as a carrier for recombinant human bone morphogenetic protein-4 on bone formation in rat calvarial defects", J Periodontol, 76, pp.2216~2222 (2005)
- Hong SJ, "The effect of a fibrin-fibronectin", beta-tricalcium phosphate, Biomaterials, pp.2006, 27[DOI]
- Patel VV, "Controlling bone morphogenetic protein diffusion and bone morphogenetic protein-stimulated bone growth using fibrin glue", Spine, 31, pp.1201~1206 (2006)
- Kim HJ, "The role of transforming growth factor-beta and bone morphogenetic protein with fibrin glue in healing of bone-tendon junction injury", Connect Tissue Res, 48, pp.309~315 (2007)
- Patel VV, "An in vitro and in vivo analysis of fibrin glue use to control bone morphogenetic protein diffusion and bone morphogenetic proteinstimulated bone growth", Spine J, 6, pp.397~403 (2006)
- Lee JG, "Healing process of the reimplanted autoclaved autogenous mandible in adult dogs", J Korean Assoc Oral Maxillofac Surg, 19, pp.514~532 (1993)
- Böhm P, "Re-implantation of autoclaved bone segments in musculoskeletal tumor surgery. Clinical experience in 9 patients followed for 1.1-8.4 years and review of the literature", Arch Orthop Trauma Surg, 118, pp.57~65 (1998)
- Ito T, "Sensitivity of osteoinductive activity of demineralized and defatted rat femur to temperature and duration of heating", Clin Orthop Relat Res, (316), pp.267~275 (1995)
- Kao JT, "Reimplantation of a contaminated and devitalized bone fragment after autoclaving in an open fracture", J Orthop Trauma, 9, pp.336~340 (1995)
- Sugiura H, "Remodelling and healing process of moderately heat-treated bone grafts after wide resection of bone and soft-tissue tumors", Arch Orthop Trauma Surg, 123, pp.514~520 (2003)
- von Wilmowsky C, "Reconstruction of a mandibular defect with autogenous, autoclaved bone grafts and tissue engineering: an in vivo pilot study", J Biomed Mater Res A, 93, pp.1510~1518 (2010)
- Izawa H, "The effect of heat-treated human bone morphogenetic protein on clinical implantation", Clin Orthop Relat Res, (390), pp.252~258 (2001)
- Smith WS, "Replantation of an autoclaved autogenous segment of bone for treatment of chondrosarcoma. Long-term follow up", J Bone Joint Surg Am, 70, pp.70~75 (1988)
- Shimizu K, "Revascularization and new bone formation in heat-treated bone grafts", Arch Orthop Trauma Surg, 119, pp.57~61 (1999)
- Shin S, "Biomechanical properties of heat-treated bone grafts", Arch Orthop Trauma Surg, 125, pp.1~5 (2005)
- Crespi R, "Comparison of magnesium-enriched hydroxyapatite and porcine bone in human extraction socket healing: a histologic and histomorphometric evaluation", Int J Oral Maxillofac Implants, 26, pp.1057~1062 (2011)
- Scarano A, "Maxillary sinus augmentation in humans using cortical porcine bone: a histological and histomorphometrical evaluation after 4 and 6 months", Clin Implant Dent Relat Res, 13, pp.13~18 (2011)
- Figueiredo M, "Physicochemical characterization of biomaterials commonly used in dentistry as bone substitutes--comparison with human bone", J Biomed Mater Res B Appl Biomater, 92, pp.409~419 (2010)