The Usefulness of Three-dimensional Computed Tomography as an Assessment of Periacetabular Osteolysis in Revision Total Hip Arthroplasty
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: This study was performed to determine the usefulness of three-dimensional computed tomography (3D-CT) in measuring periacetabular osteolysis by comparing the real volume of osteolysis in revision surgery. Materials and Methods: Twnety-three patients who had undergone revision surgery due to periacetabular osteolysis but not included septic osteolysis and implant loosening. The mean age of patients at the time of surgery was 55.2 years. And the mean time interval between the primary total hip arthroplasty and revision surgery was 13.3 years. We measured the polyethylene wear in plain radiographs using computer assisted vector wear analysis program, the volume of acetabular osteolytic lesions in high-resolution spiral CT scans using Rapidia 3D software version 2.8 algorithms before the revision surgery were performed. Intraoperative real osteolytic volume was calculated as the sum of the volumetric increments of the acetabular cup and impacted allo-cancellous bone volume. Results: Strong correlation was found between the volume of acetabular osteolytic lesions measured on 3D-CT and intraoperative real osteolytic volume which was calculated as the sum of the volumetric increments of the acetabular cup and impacted allo-cancellous bone volume. Conclusion: 3D-CT is considered a useful method for assessing and measuring the volume of periacetabular osteolysis before revision surgery.
Abstract
Purpose: This study was performed to determine the usefulness of three-dimensional computed tomography (3D-CT) in measuring periacetabular osteolysis by comparing the real volume of osteolysis in revision surgery. Materials and Methods: Twnety-three patients who had undergone revision surgery due to periacetabular osteolysis but not included septic osteolysis and implant loosening. The mean age of patients at the time of surgery was 55.2 years. And the mean time interval between the primary total hip arthroplasty and revision surgery was 13.3 years. We measured the polyethylene wear in plain radiographs using computer assisted vector wear analysis program, the volume of acetabular osteolytic lesions in high-resolution spiral CT scans using Rapidia 3D software version 2.8 algorithms before the revision surgery were performed. Intraoperative real osteolytic volume was calculated as the sum of the volumetric increments of the acetabular cup and impacted allo-cancellous bone volume. Results: Strong correlation was found between the volume of acetabular osteolytic lesions measured on 3D-CT and intraoperative real osteolytic volume which was calculated as the sum of the volumetric increments of the acetabular cup and impacted allo-cancellous bone volume. Conclusion: 3D-CT is considered a useful method for assessing and measuring the volume of periacetabular osteolysis before revision surgery.
참고문헌 (22)
- Engh CA Jr, "Long-term results of use of the anatomic medullary locking prosthesis in total hip arthroplasty", J Bone Joint Surg Am, 79, pp.177~184 (1997)
- Harris WH, "Wear and periprosthetic osteolysis : the problem", Clin Orthop Relat Res, 393, pp.66~70 (2001)
- Maloney WJ, "Fixation, polyethylene wear, and pelvic osteolysis in primary total hip replacement", Clin Orthop Relat Res, 369, pp.157~164 (1999)
- Maloney WJ, "Treatment of pelvic osteolysis associated with a stable acetabular component inserted without cement as part of a total hip replacement", J Bone Joint Surg Am, 79, pp.1628~1634 (1997)
- Xenos JS, "Osteolysis around an uncemented cobalt chrome total hip arthroplasty", Clin Orthop Relat Res, 317, pp.29~36 (1995)
- Carter DR, "The compressive behavior of bone as a two-phase porous structure", J Bone Joint Surg Am, 59, pp.954~962 (1977)
- Zicat B, "Patterns of osteolysis around total hip components inserted with and without cement", J Bone Joint Surg Am, 77, pp.432~439 (1995)
- Schmalzried TP, "The relationship between the design, position, and articular wear of acetabular components inserted without cement and the development of pelvic osteolysis", J Bone Joint Surg Am, 76, pp.677~688 (1994)
- Claus AM, "Radiographic definition of pelvic osteolysis following total hip arthroplasty", J Bone Joint Surg Am, 85(A), pp.1519~1526 (2003)
- Kitamura N, "The value of anteroposterior pelvic radiographs for evaluating pelvic osteolysis", Clin Orthop Relat Res, 453, pp.239~245 (2006)
- Looney RJ, "Volumetric computerized tomography as a measurement of periprosthetic acetabular osteolysis and its correlation with wear", Arthritis Res, 4, pp.59~63 (2002)
- Puri L, "Use of helical computed tomography for the assessment of acetabular osteolysis after total hip arthroplasty", J Bone Joint Surg Am, 84(A), pp.609~614 (2002)
- Stulberg SD, "Monitoring pelvic osteolysis following total hip replacement surgery: an algorithm for surveillance", J Bone Joint Surg Am, 84(A Suppl 2), pp.116~122 (2002)
- Oparaugo PC, "Correlation of wear debris-induced osteolysis and revision with volumetric wear-rates of polyethylene : a survey of 8reports in the literature", Acta Orthop Scand, 72, pp.22~28 (2001)
- Orishimo KF, "Relationship between polyethylene wear and osteolysis in hips with a second-generation porous-coated cementless cup after seven years of follow-up", J Bone Joint Surg Am, 85(A), pp.1095~1099 (2003)
- Perez RE, "Polyethylene wear and periprosthetic osteolysis in metalbacked acetabular components with cylindrical liners", J Arthroplasty, 13, pp.1~7 (1998)
- Martell JM, "Determination of polyethylene wear in total hip replacements with use of digital radiographs", J Bone Joint Surg Am, 79, pp.1635~1641 (1997)
- Egawa H, "Can the volume of pelvic osteolysis be calculated without using computed tomography?", Clin Orthop Relat Res, 467, pp.181~187 (2009)
- Howie DW, "Progression of acetabular periprosthetic osteolytic lesions measured with computed tomography", J Bone Joint Surg Am, 89, pp.1818~1825 (2007)
- Devane PA, "A randomized trial", J Bone Joint Surg Am, 79, pp.682~689 (1997)
- Martell JM, "Comparison of two and three-dimensional computerized polyethylene wear analysis after total hip arthroplasty", J Bone Joint Surg Am, 85(A), pp.1111~1117 (2003)
- McCalden RW, "Radiographic methods for the assessment of polyethylene wear after total hip arthroplasty", J Bone Joint Surg Am, 87, pp.2323~2334 (2005)