Surgeon’s Experience and Accuracy of Preoperative Digital Templating in Primary Total Hip Arthroplasty
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: Preoperative planning has become essential in performance of total hip arthroplasty (THA). However, data regarding the effect of the planner’s experience on the accuracy of digital preoperative planning is limited. The objective of this study was to assess the accuracy of digital templating in THA based on the surgeon’s experience. Materials and Methods: A retrospective study was conducted. An analysis of 98 anteroposterior pelvic radiographs, which were individually templated by four surgeons (two hip surgeons and two orthopaedic residents) using TraumaCad® digital planning, was performed. A comparison of preoperatively planned sizes with implanted sizes was performed to evaluate the accuracy of predicting component size. The results of preoperative planning performed by hip surgeons and orthopaedic residents were compared for testing of the planner’s experience. Results: Femoral stem was precisely predicted in 32.4% of cases, acetabular component in 40.3%, and femoral offset in 76.7%. Prediction of cup size showed greater accuracy than femoral size among all observers. No differences in any variable were observed among the four groups (acetabular cup P=0.07, femoral stem P=0.82, femoral offset P=0.06). All measurements showed good reliability (intraclass correlation coefficient [ICC] acetabular cup: 0.76, ICC femoral stem: 0.79). Conclusion: The results of this study might suggest that even though a surgeon’s experience supports improved precision during the planning stage, it should not be restricted only to surgeons with a high level of experience. We consider preoperative planning an essential part of the surgery, which should be included in training for orthopaedics residents.
Abstract
Purpose: Preoperative planning has become essential in performance of total hip arthroplasty (THA). However, data regarding the effect of the planner’s experience on the accuracy of digital preoperative planning is limited. The objective of this study was to assess the accuracy of digital templating in THA based on the surgeon’s experience. Materials and Methods: A retrospective study was conducted. An analysis of 98 anteroposterior pelvic radiographs, which were individually templated by four surgeons (two hip surgeons and two orthopaedic residents) using TraumaCad® digital planning, was performed. A comparison of preoperatively planned sizes with implanted sizes was performed to evaluate the accuracy of predicting component size. The results of preoperative planning performed by hip surgeons and orthopaedic residents were compared for testing of the planner’s experience. Results: Femoral stem was precisely predicted in 32.4% of cases, acetabular component in 40.3%, and femoral offset in 76.7%. Prediction of cup size showed greater accuracy than femoral size among all observers. No differences in any variable were observed among the four groups (acetabular cup P=0.07, femoral stem P=0.82, femoral offset P=0.06). All measurements showed good reliability (intraclass correlation coefficient [ICC] acetabular cup: 0.76, ICC femoral stem: 0.79). Conclusion: The results of this study might suggest that even though a surgeon’s experience supports improved precision during the planning stage, it should not be restricted only to surgeons with a high level of experience. We consider preoperative planning an essential part of the surgery, which should be included in training for orthopaedics residents.
참고문헌 (24)
- Khanduja V, "Total hip arthroplasty in 2017-current concepts and recent advances", Indian J Orthop, 51, pp.357~358 (2017)[DOI]
- Liu XW, "Total hip arthroplasty : a review of advances, advantages and limitations", Int J Clin Exp Med, 8, pp.27~36 (2015)
- Smith JBV, "The accuracy and reliability of preoperative digital 2D templating in prosthesis size prediction in uncemented versus cemented total hip arthroplasty : a systematic review and meta-analysis", EFORT Open Rev, 6, pp.1020~1039 (2021)[DOI]
- Alnahhal A, "Templating hip arthroplasty", Open Access Maced J Med Sci, 7, pp.672~685 (2019)
- Efe T, "Precision of preoperative digital templating in total hip arthroplasty", Acta Orthop Belg, 77, pp.616~621 (2011)
- Blackley HR, "Planning and management of the difficult primary hip replacement : preoperative planning and technical considerations", Instr Course Lect, 49, pp.3~11 (2000)
- González Della Valle A, "The utility and precision of analogue and digital preoperative planning for total hip arthroplasty", Int Orthop, 32, pp.289~294 (2008)[DOI]
- González Della Valle A, "The precision and usefulness of preoperative planning for cemented and hybrid primary total hip arthroplasty", J Arthroplasty, 20, pp.51~58 (2005)[DOI]
- Xu S, "Improving acetabular component positioning in supine direct anterior total hip arthroplasty with a transparency template : a novel, simple, and costeffective technique", Hip Pelvis, 33, pp.120~127 (2021)[DOI]
- Montiel V, "Total hip arthroplasty digital templating : size predicting ability and interobserver variability", Indian J Orthop, 54, pp.840~847 (2020)[DOI]
- Petretta R, "Acetate templating on digital images is more accurate than computer-based templating for total hip arthroplasty", Clin Orthop Relat Res, 473, pp.3752~3759 (2015)[DOI]
- Bertz A, "Validity and reliability of preoperative templating in total hip arthroplasty using a digital templating system", Skeletal Radiol, 41, pp.1245~1249 (2012)[DOI]
- Eschweiler J, "Application and evaluation of biomechanical models and scores for the planning of total hip arthroplasty", Proc Inst Mech Eng H, 226, pp.955~967 (2012)[DOI]
- Colombi A, "Total hip arthroplasty planning", EFORT Open Rev, 4, pp.626~632 (2019)[DOI]
- Kearney R, "The accuracy and interobserver reliability of acetate templating in total hip arthroplasty", Ir J Med Sci, 182, pp.409~414 (2013)[DOI]
- Shin JK, "Accuracy and reliability of preoperative on-screen templating using digital radiographs for total hip arthroplasty", Hip Pelvis, 28, pp.201~207 (2016)[DOI]
- Hsu AR, "Effect of training level on accuracy of digital templating in primary total hip and knee arthroplasty", Orthopedics, 35, pp.e179~e183 (2012)[DOI]
- Kumar PG, "Reproducibility and accuracy of templating uncemented THA with digital radiographic and digital TraumaCad templating software", Orthopedics, 32, pp.815~ (2009)[DOI]
- Mittag F, "Predictive value of preoperative digital templating in THA depends on the surgical experience of the performing physician", Orthopedics, 35, pp.e144~e147 (2012)[DOI]
- Holzer LA, "The accuracy of digital templating in uncemented total hip arthroplasty", Arch Orthop Trauma Surg, 139, pp.263~268 (2019)[DOI]
- "Z Orthop Unfall", 2012, 404~408, 10.1055[DOI]
- Osmani FA, "Variance in predicted cup size by 2-dimensional vs 3-dimensional computerized tomography-based templating in primary total hip arthroplasty", Arthroplast Today, 3, pp.289~293 (2017)[DOI]
- Wako Y, "Interobserver and intraobserver reliability of three-dimensional preoperative planning software in total hip arthroplasty", J Arthroplasty, 33, pp.601~607 (2018)[DOI]
- Kuroda K, "The value of computed tomography based navigation in revision total hip arthroplasty", Int Orthop, 38, pp.711~716 (2014)[DOI]