임플란트와 상부보철물의임상적/실험적 부적합 평가에 관한 문헌고찰

키워드

참고문헌 (47)

1. Jemt T, "Measuring fit at the implant prosthodontic interface", J Prosthet Dent, 75, pp.314~325 (1996)[DOI]
2. Jimbo R, "Vertical fracture and marginal bone loss of internal-connection implants: a finite element analysis", Int J Oral Maxillofac Implants, 28, pp.e171~e176 (2013)[DOI]
3. Cha HS, "Cumulative survival rate and complication rates of single-tooth implant; Focused on the coronal fracture of fixture in the internal connection implant", J Oral Rehabil, 40, pp.595~602 (2013)[DOI]
4. Branemark P, "Osseointegration and its experimental background", J Prosthet Dent, 50, pp.399~410 (1983)[DOI]
5. Watanabe F, "Analysis of stress distribution in a screw-retained implant prosthesis", Int J Oral Maxillofac Implants, 15, pp.209~218 (2000)
6. Jemt T, "Prosthesis misfit and marginal bone loss in edentulous implant patients", Int J Oral Maxillofac Implants, 11, pp.620~625 (1996)
7. Kosyfaki P, "Relationship between crowns and the periodontium: a literature update", Quintessence Int, 41, pp.109~126 (2010)
8. Katsoulis J, "Misfit of implant prosthese and its impact on clinical outcomes. Definition, assessment and a systematic review of the literature", Eur J Oral Implantol, 10, pp.121~138 (2017)
9. Sharkey S, "A Radiographic analysis of implant component misfit", Int J oral Maxillofac Implants, 26, pp.807~815 (2011)
10. Hayashi M, "Influence of vision on the evaluation of marginal discrepancies in restorations", Oper Dent, 30, pp.598~601 (2005)
11. Hayashi M, "Influence of explorer tip diameter in identifying restoration margin discrepancies", J Dent, 33, pp.669~674 (2005)[DOI]
12. Kan JY, "Clinical methods for evaluating implant framework fit", J Prosthet Dent, 81, pp.7~13 (1999)[DOI]
13. Jemt T, "Failures and complications in 391 consecutively inserted fixed prostheses supported by Branemark implant in the edentulous jaw: a study of treatment from the time of prostheses placement to the first annual check up", Int J Oral Maxillofac Implants, 6, pp.270~276 (1991)
14. Jemt T, "Accuracy of implant-supported prostheses in the edentulous jaw: analysis of precision of fit between cast gold-alloy frameworks and master casts by means of a three dimensional photogrammetric technique", Clin Oral Implants Res, 6, pp.172~180 (1995)[DOI]
15. Abduo J, "Assessing the fit of implant fixed prostheses: A critical review", Int J Oral Maxillofac Implants, 25, pp.506~515 (2010)
16. Lee JI, "Effect of implant number and distribution on load transfer in implant-supported partial fixed dental prostheses for the anterior maxilla: A photoelastic stress analysis study", J Prosthet Dent, 115, pp.161~169 (2016)[DOI]
17. Lencioni KA, "Photoelastic comparison of as-cast and laser-welded implant frameworks", J Prosthet Dent, 114, pp.652~659 (2015)[DOI]
18. Lee JI, "A photoelastic stress analysis of screw- and cementretained implant prostheses with marginal gaps", Clin Implant Dent Relat Res, 15, pp.735~749 (2013)
19. de Torres EM, "Correlation between vertical misfits and stresses transmitted to implants from metal frameworks", J Biomech, 44, pp.1735~1739 (2011)[DOI]
20. Termeie D, "Effect of implant diameter and ridge dimension on stress distribution in mandibular first molar siters-A photoelastic study", J Oral Implantol, 41, pp.e165~e173 (2015)[DOI]
21. Geng JP, "Application of finite element analysis in implant dentistry: A review of the literature", J Prosthet Dent, 85, pp.585~598 (2001)[DOI]
22. Kunavisarut C, "Finite element analysis on dental implant-supported prostheses without passive fit", J Prosthodont, 11, pp.30~40 (2002)
23. Assuncao WG, "Three-dimensional finite element analysis of vertical and angular misfit in implant-supported fixed prostheses", Int J Oral Maxillofac Implants, 26, pp.788~796 (2011)
24. Dos Santos MB, "Effect of vertical misfit and clip material on stress distribution of overdentures under masticatory loading", Med Biol Eng Comput, 54, pp.1515~1521 (2016)[DOI]
25. Winter W, "Bone adaptation induced by non-passively fitting implant superstructures: A finite element analysis based on in vivo strain measurements", Int J Oral Maxillofac Implants, 26, pp.1288~1295 (2011)
26. Brosh T, "The influence of abutment angulation on strains and stresses along the implant", bone interface: Comparison between two experimental techniques, 1998, pp.79, 328~334
27. Abduo J, "Influence of vertical misfit of titanium and zirconia frameworks on peri-implant strain", Int J Oral Maxillofac Implants, 27, pp.529~536 (2012)
28. De Vasconcellos DK, "Strain gauge analysis of the effect of porcelain firing simulation on the prosthetic misfit of implant-supported frameworks", Implant Dent, 21, pp.225~229 (2012)[DOI]
29. Tahmaseb A, "Optical scan analysis to detect minor misfit on implant-supported superstructures", Int J Oral Maxillofac Implants, 26, pp.1344~1350 (2011)
30. Nascimento Cd, "Marginal fit and microbial leakage along the implant-abutment interface of fixed partial prosthesis: An in vitro analysis using checkerboard DNA-DNA hybridization", J Prosthet Dent, 114, pp.831~838 (2015)[DOI]
31. Teixeira W, "Microleakage into and from two-stage implants: An in vitro comparative study", Int J Oral Maxillofac Implants, 26, pp.56~62 (2011)
32. Piattelli A, "Fluids and microbial penetration in the internal part of cement-retained versus screwretained implant-abutment connections", J Periodontol, 72, pp.1146~1150 (2001)[DOI]
33. do Nascimento C, "Leakage of saliva through the implant-abutment interface: in vitro evaluation of three different implant connections under unloaded and loaded conditions", Int J Oral Maxillofac Implants, 27, pp.551~560 (2012)
34. Lie A, "Photogrammetric measurements of implant positions. Description of a technique to determine the fit between implants and superstructures", Clin Oral Implants, 5, pp.30~36
35. Jemt T, "Measurements of bone and frame-work deformations induced by misfit of implant superstructures. A pilot study in rabbits", Clin Oral Implants Res, 9, pp.272~280 (1998)[DOI]
36. Chia VA, "In vitro three-dimensional accuracy of digital implant impressions: The effect of implant angulation", Int J Oral Maxillofac Implants, 32, pp.313~321 (2017)[DOI]
37. Geramipanah F, "Effects of impression levels and trays on the accuracy of impressions taken from angulated implants", Clin Oral Implants Res, 26, pp.1098~1105 (2015)[DOI]
38. Eliasson A, "The precision of fit of milled titanium implant frameworks in the edentulous jaw", Clin Implant Dent Relat Res, 12, pp.81~90 (2010)
39. Alvarez A, "A comparison of two soldering techniques on the misfit of bar-retained implantsupported overdentures", J Prosthodont, 23, pp.163~170 (2014)[DOI]
40. Spazzin AO, "Fit analysis of defferent framework fabrication techniques for implant-supported partial prostheses", Int J Prosthodont, 29, pp.351~353 (2016)[DOI]
41. Katsoulis J, "CAD", CAM fabrication accuracy of long- vs. shortspan implant-supported FDPs, 2015, pp.26, 245~249
42. Katsoulis J, "Precision of fit of implantsupported screw-retained 10-unit computer-aided - designed and computer-aided-manufactured frameworks made from zirconium dioxide and titanium: an in vitro study", Clin Oral Implants Res, 26, pp.44~49 (2015)
43. Pauwels R, "Technical aspects of dental CBCT: state of the art", Dentomaxillofac Radiol, 44, pp.20140224~ (2015)[DOI]
44. Rodrigues SA, "The role of welding techniques in the biomechanical behavior of implant-supported prostheses", Mater Sci Eng C Mater Biol Appl, 78, pp.435~442 (2017)[DOI]
45. Meleo D, "Fixture-abutment connection surface and micro-gap measurements by 3D micro-tomographic technique analysis", Ann Ist Super Sanita, 48, pp.53~58 (2012)
46. Blum K, "Fatigue induced changes in conical implant-abutment connections", Dent Mater, 11, pp.1415~1426 (2015)
47. Rack A, "In vitro synchrotron-based radiography of micro-gap formation at the implant-abutment interface of two-piece dental implants", J Synchrotron Radiat, 17, pp.289~294 (2010)[DOI]

관련 논문AI추천