본문 바로가기
KERD
논문KCI 등재

Primer가 이중중합 레진시멘트의 중합에 미치는 영향

Effect of primer on the polymerization of dual cure resin cements

김진우|박세희|조경모|Enkhbileg Nyamsuren|이은혜
대한치과의사협회 (korea dental association)|2020.11|대한치과의사협회지 (Journal of Korean Dental Association)|제58권 제12호|pp. 726-736|DOI 10.22974/jkda.2020.58.12.001

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

primerpolymerizationhardness testdual cure resin cementself-cure
주제분류치의학

초록

목적 : 중합 광이 닿지 않는 곳에서 자가중합을 촉진하는 primer (G-Cem One Adhesive Enhancing Primer)가 개발되었다. primer의 적용에 따른 중합도의 차이에 대해 비교하였다. 재료 및 방법 : 이중중합 형태의 자가접착레진시멘트인 G-Cem One, G-Cem Linkace, Rely-X U200, 이중중합 레진시멘트인 Rely-X Ultimate와 G-Cem One Primer를 사용하였다. 알루미늄으로 직경 5 ㎜, 두께 2 ㎜의 몰드를 제작하고 유리판 위에 primer를 적용한 후 각각의 재료들을 몰드에 채우고 자가중합을 유도하였으며 Vickers 미세경도 측정기를 이용하여 혼합 후 10 분, 1 시간, 3 시간, 6 시간, 24 시간 후의 미세경도를 측정하였다. 모든 경도 값을 통계처리 하였다. 결과 : G-Cem One, G-Cem LinkAce, Rely-X U200은 시멘트의 혼합 초기에 primer를 적용했을 때 미세경도 값이 높게 나타났으며, Rely-X Ultimate에서는 primer의 적용이 유의한 차이를 보이지 않았다. 결론 : 새로운 primer의 적용은 이중중합 레진시멘트의 혼합 초기에 중합을 촉진시키는 효과가 있다

Abstract

Objectives: The primer (G-Cem One Adhesive Enhancing Primer), which promote self-polymerization more in the absence of polymerization light is developed. To date, many studies on the mechanical properties and prognosis of various self-adhesive resin cements have been published. Since there is almost no comparison of the degree of polymerization depending on the application of primers, this study was attempted. Materials and Methods : A total of three types of dual cure self-adhesive resin cements (G-Cem One, G-Cem LinkAce, Rely-X U200) and one type of dual cure resin cement (Rely-X Ultimate) were evaluated. G-Cem One Primer was used as a primer enhancing of auto-polymerization. A mold 5 mm in diameter and 2 mm thick was made from aluminum, primers were applied on a glass slit, and each material was filled in the mold, and self-polymerization was induced. The microhardness was measured with a Vickers microhardness machine after 10 minutes, 1 hour,3 hours,6 hours and 24 hours. All dates were statistically analyzed. Results : G-Cem One, G-Cem LinkAce and Rely-X U200 showed high microhardness values when primers were applied at the beginning of cement mixing. Primer application did not show significantly different in Rely-X Ultimate. Conclusion : The application of a new primer has a dual cure self-adhesive resin cement which promotes the polymerization at the beginning of the mixing.

참고문헌 (43)

  1. K ilinc E, "The efefct of ceramic restoration shade and thickness on the poylmerization of light-and dual-cure resin cements", Operative Dent, 36(6), pp.661~669 (2011)
  2. C ardash HS, "The efefct of porcelain color on the hardness of luting composite resin cement", J Prosthet Dent, 69(6), pp.620~623 (1993)
  3. Akehashi S, "Enhancement of dentin bond strength of resin cement using new resin coating materials", Dent Mater J. (2019)
  4. Almeida CM, "Evaluation of long-term bond strength and selected properties of self-adhesive resin cements", Braz. Oral Res., 32, pp.e15~ (2018)
  5. Kurokawa H, "Effect of light irradiation and primer application on polymerization of selfadhesive resin cements monitored by ultrasonic velocity", Dent Mater J, 37(4), pp.534~541 (2018)
  6. Pishevar L, "The effect of ceramic thickness on the surface microhardness of dual-cured and light-cured resin cements", The journal of contemporary dental practice, 20(4), pp.466~470 (2019)
  7. Shim JS, "Polymerization Mode of self-adhesive, dual-cured dental resin cements light cured through various restorative materials", J Esthet Restor Dent, 29(3), pp.209~214 (2017)
  8. Fonseca RG, "The influence of chemical activation on hardness of dual-curing resin cements", Braz. Oral Res., 18(3), pp.228~232 (2004)
  9. Aguiar TR, "The efefct of photopolymerization on the degree of conversion, polymerization kinetic, biaxial fel xure strength, and modulus of self-adhesive resin cements", J Prosthet Dent, 113, pp.128~134 (2015)
  10. L ee IB, "Influenec of ceramic thickness and curing mode on the poylmerization shrinkage kinetics of dualcured resin cements", Dent Mater J, 24(8), pp.1141~1147 (2008)
  11. El-Mowafy O, "Hardening of new resin cements cured through a ceramic inlay", Operative Dent, 24, pp.38~44 (1999)
  12. Caughman WF, "Curing potential of dual-polymerizable resin cements in simulated clinical situations", J Prosthet Dent, 85(5), pp.479~484 (2001)
  13. Takubo C, "Influence of power density and primer application on polymerization of dualcured resin cements monitored by ultrasonic measurement", Eur J Oral Sci, 118, pp.417~422 (2010)
  14. A rrais CA, "Effect of curing mode on the poylmerization characteristics of dual-cured resin cement systems", J Dent, 36, pp.418~426 (2008)
  15. Arrais CA, "Kinetic analysis of monomer conversion in auto-and dual-polymerizing modes of commercial resin luting cements", J Prosthet Dent, 101, pp.128~136 (2009)
  16. Aguiar TR, "Effect of curing mode on bond strength of self-adhesive resin luting cements to dentin", J Biomed Mater Res B Appl Biomater, 93, pp.122~127 (2010)
  17. Meng X, "Influence of ceramic thickness on mechanical properties and polymer structure of dual-cured resin luting agents", Dent Mater J, 24, pp.594~599 (2008)
  18. A rrais CAG, "The efefct of viscosity and activation mode on biaxial felxure strength and modulus of dual resin cements", J Dent Sci, 27, pp.147~151 (2012)
  19. Y u H, "Bonding of dieffrent selfadhesive resins to high-strength composite resin block treated with surface conditioning", J Prosthet Dent, 63(3), pp.340~346 (2019)
  20. Piva E, "Influence of energy density of different light sources on Knoop hardness of a dual-cured resin cement", J Appl Oral Sci, 16(3), pp.189~193 (2008)
  21. Watts D, "Variables influencing hardness development in dual-cure composite luting materials", J Dent Res, 73, pp.801~ (1994)
  22. Ferracane JL, "Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins", Dent Mater, 1, pp.11~14 (1985)
  23. Calixto LR, "Effect of resin cement system and root region on the push-out bond strength of a translucent fiber post", Oper Dent, 37, pp.80~86 (2012)
  24. Asmussen E., "Restorative resins: hardness and strength vs. quantity of remaining double bonds", Scand J Dent Res, 90, pp.484~489 (1982)
  25. Rueggeberg FA, "Correlation of parameters used to estimate monomer conversion in a light-cured composite", J Dent Res, 67, pp.932~937 (1988)
  26. Asmussen E, "Factors affecting the quantity of remaining double bonds in restorative resin polymers", Scand J Dent Res, 90, pp.490~626 (1982)
  27. M oraes LG, "Infrared spectroscopy : a tool for determination of the degree of conversion in dental composites", J Appl Oral Sci, 16, pp.145~149 (2008)
  28. 이정원, "Curing efficiency of various resin-based materials polymerized through different ceramic thicknesses and curing time", The Journal of Advanced of Prosthodontics, 3(3), pp.126~131 (2011), 대한치과보철학회[DOI]
  29. Ferracane JL, "Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins", Dent Mater J, 1, pp.11~14 (1985)
  30. Kim AR, "Effect of activation modes on the compressive strength, diametral tensile strength and microhardness of dual-cured selfadhesive resin cements", Dent Mater J, 35(2), pp.298~308 (2016)
  31. Tay FR, "Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part I. Singlestep self-etching adhesive", J Adhes Dent, 5, pp.27~40 (2003)
  32. Kumbuloglu O, "A study of the physical and chemical properties of four resin composite luting cements", Int J Prosthodont, 17, pp.357~363 (2004)
  33. 송창규, "수종 Automixing 레진시멘트의 물성과 상아질에 대한 전단결합강도", 구강회복응용과학지, 25(4), pp.437~444 (2009), 대한턱관절교합학회
  34. Moszner N, "Chemical aspects of selfetching enamel-dentin adhesives : a systematic review", Dent Mater J, 21, pp.895~910 (2005)
  35. Asmussen E, "Influence of UEDMA, Bis-GMA and TEGDMA on selected mechanical properties of experimental resin composites", Dent Mater J, 14, pp.51~56 (1998)
  36. Ikemura K, "Effect on adhesion of new polymerization initiator systems comprising 5-monosubstituted barbituric acids, aromatic sulfinate amides, and tert-butyl peroxymaleic acid in dental adhesive resin", J Appl Polym Sci, 72, pp.1655~1668 (1999)
  37. 배인혜, "The effects of deproteinization and primer treatment on microtensile bond strength of self-adhesive resin cement to dentin", 대한치과재료학회지, 46(2), pp.99~108 (2019), 대한치과재료학회[DOI]
  38. Wang T, "Photocure bonding agent containing phosphoric methacrylate", Dent Mater J, 7(1), pp.59~62 (1991)
  39. C higira H, "Self-etching dentin primers containing phenyl-P", J Dent Res, 73(5), pp.1088~1095 (1994)
  40. Suh BI, "Factors contributing to the incompatibility between simplified-step adhesives and chemically cured or dual-cured composites. Part III. Effect of acidic monomers", J Adhes Dent., 5, pp.267~282 (2003)
  41. Suh BI., "Principles of adhesion dentistry", pp.109~110 (2013), Well publishing inc
  42. Chung KH, "Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins", J Oral Rehabil, 17, pp.487~494 (1990)
  43. Ilie N, "Efefct of curing mode on the micor-mechanical properties of dual-cured self-adhesive resin cements", Clin Oral Investig, 16, pp.505~512 (2012)

관련 논문AI추천

중합방법이 이중중합 레진시멘트의 미세경도에 미치는 영향김진우, 박세희, 이기덕, 조경모대한치과보존학회 · Restorative Dentistry and Endodontics2011 · 제36권 제2호중합방법에 따른 여러 이중중합 레진 시멘트의 기계적 성질 평가김수연, 김진우, 박세희, 조경모대한턱관절교합학회 · 구강회복응용과학지2015 · 제31권 제1호즉시 광중합과 지연 광중합이 이원 중합 레진시멘트의 중합 수축량에 미치는 영향김성훈, 김희경, 이소연, 최유성, 하승룡대한치과보철학회 · 대한치과보철학회지2014 · 제52권 제3호치과용 레진 시멘트의 유변학적 성질김성훈, 김희경, 여인성, 이재림, 이재봉, 하승룡, 한중석대한치과보철학회 · 대한치과보철학회지2014 · 제52권 제2호레진 시멘트의 혼합 후 시간에 따른 피막도의 변화김성훈, 김희경, 여인성, 이유승, 이재봉, 하승룡, 한중석대한치과보철학회 · 대한치과보철학회지2015 · 제53권 제4호이원 중합 레진시멘트의 수분 흡착도와 수분 흡착에 따른 경도 변화 비교 연구이청희, 조진현, 최수정대한턱관절교합학회 · 구강회복응용과학지2014 · 제30권 제2호

이 간행물의 다른 논문 (4건)

상악 전치부 외상 치아의 심미 치료 : 증례보고민정범, 이원표, 박경리, 박태영pp. 737-744노년기 건강의 적, 노쇠(frailty)와 구강노쇠(oral frailty)정회인pp. 746-750구강건조증 및 구취의 관리박문수pp. 751-759노인의 구강점막 질환임현대pp. 760-770
원문 보기