자연치와 임플란트 고정성보철에서PAEK소재의 적용

키워드

참고문헌 (24)

1. Kurtz SM, "PEEK biomaterials in trauma, orthopedic, and spinal implants", Biomaterials, 28, pp.4845~4869 (2007)[DOI]
2. Toth JM, "Polyetheretherketone as a biomaterial for spinal applications", Biomaterials, 27, pp.324~334 (2006)[DOI]
3. Rea M, "Marginal healing using Polyetheretherketone as healing abutments: an experimental study in dogs", Clin Oral Implants Res, 28, pp.e46~e50 (2017)[DOI]
4. Pokorny D, "[Polyetheretherketone (PEEK). Part II: application in clinical practice", Acta Chir Orthop Traumatol Cech, 77, pp.470~478 (2010)
5. Sandler J, "Carbon-nanofibre-reinforced poly(ether ether ketone) composites", Compos Part A: Appl Sci Manuf, 33, pp.1033~1039 (2002)[DOI]
6. Skinner HB, "Composite technology for total hip arthroplasty", Clin Orthop Relat Res, pp.224~236 (1988)
7. Zoidis P, "Using modified polyetheretherketone (PEEK) as an alternative material for endocrown restorations: A short-term clinical report", J Prosthet Dent, 117, pp.335~339 (2017)[DOI]
8. Heimer S, "Discoloration of PMMA, composite, and PEEK", Clin Oral Investig, 21, pp.1191~1200 (2017)[DOI]
9. Heimer S, "Surface properties of polyetheretherketone after different laboratory and chairside polishing protocols", J Prosthet Dent, 117, pp.419~425 (2017)[DOI]
10. Katzer A, "Polyetheretherketone--cytotoxicity and mutagenicity in vitro", Biomaterials, 23, pp.1749~1759 (2002)[DOI]
11. Stawarczyk B, "Polyetheretherketone-a suitable material for fixed dental prostheses?", J Biomed Mater Res B Appl Biomater, 101, pp.1209~1216 (2013)[DOI]
12. Staniland P, "Synthesis, characterization and study of the thermal properties of new polyarylene ethers", Polymer, 33, pp.1976~1981 (1992)[DOI]
13. Reich S, "Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD", CAM systems, 2005, pp.113, 174~179
14. Schwitalla A, "PEEK dental implants: a review of the literature", J Oral Implantol, 39, pp.743~749 (2013)[DOI]
15. Najeeb S, "Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics", J Prosthodont Res, 60, pp.12~19 (2016)[DOI]
16. Beuer F, "Load-bearing capacity of all-ceramic three-unit fixed partial dentures with different computeraided design (CAD)", computer-aided manufacturing (CAM) fabricated framework materials, 2008, pp.116, 381~386
17. Zok FW, "Property maps for abrasion resistance of materials", Acta Mater, 55, pp.6365~6371 (2007)[DOI]
18. Biacchi GR, "Comparison of fracture strength of endocrowns and glass fiber postretained conventional crowns", Oper Dent, 37, pp.130~136 (2012)[DOI]
19. Han KH, "Implant- and Tooth-Supported Fixed Prostheses Using a High-Performance Polymer (Pekkton) Framework", Int J Prosthodont, 29, pp.451~454 (2016)[DOI]
20. Stawarczyk B, "Three-unit reinforced polyetheretherketone composite FDPs: influence of fabrication method on load-bearing capacity and failure types", Dent Mater J, 34, pp.7~12 (2015)[DOI]
21. Zoidis P, "Modified PEEK resin-bonded fixed dental prosthesis as an interim restoration after implant placement", J Prosthet Dent, 116, pp.637~641 (2016)[DOI]
22. Schwitalla AD, "Maximum insertion torque of a novel implant-abutment-interface design for PEEK dental implants", J Mech Behav Biomed Mater, 77, pp.85~89 (2018)[DOI]
23. Liu X, "Antibacterial properties of nano-silver coated PEEK prepared through magnetron sputtering", Dent Mater, 33, pp.e348~e360 (2017)[DOI]
24. Santing HJ, "Fracture strength and failure mode of maxillary implant-supported provisional single crowns: a comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments", Clin Implant Dent Relat Res, 14, pp.882~889 (2012)[DOI]

관련 논문AI추천