지르코니아 강화 리튬 실리케이트세라믹의 특성과 임상적용

키워드

참고문헌 (39)

1. Coldea A, "Mechanical properties of polymer-infiltrated-ceramic-network materials", Dent Mater, 29(4), pp.419~426 (2013)[DOI]
2. Salazar Marocho SM, "Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics", Dent Mater, 26(5), pp.483~490 (2010)[DOI]
3. Thompson JY, "Adhesion", cementation to zirconia and other nonsilicate ceramics: where are we now?, 2011, pp.27(1), 71~82
4. Ferrari M, "Zirconia abutments and restorations: from laboratory to clinical investigations", Dent Mater, 31(3), pp.e63~e76 (2015)
5. Culp L, "Lithium disilicate: the restorative material of multiple options", Compend Contin Educ Dent, 31(9), pp.716~ (2010)
6. Kelly JR, "Ceramic materials in dentistry: historical evolution and current practice", Aust Dent J, 56(Suppl 1), pp.84~96 (2011)[DOI]
7. Fasbinder DJ, "Materials for chairside CAD", CAM restorations, 2010, pp.31(9), 702~
8. Giordano R, "Materials for chairside CAD", CAM-produced restorations, 2006, pp.137(Suppl), 14S~21S
9. Fasbinder DJ, "A clinical evaluation of chairside lithium disilicate CAD", CAM crowns: a two-year report, 2010, pp.141(Suppl 2), 10S~14S
10. Wiedhahn K, "From blue to white: new high-strength material for Cerec--IPS e.max CAD LT", Int J Comput Dent, 10(1), pp.79~91 (2007)
11. Pieger S, "Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: a systematic review", J Prosthet Dent, 112(1), pp.22~30 (2014)[DOI]
12. Elsaka SE, "Mechanical properties of zirconia reinforced lithium silicate glass-ceramic", Dent Mater, 32(7), pp.908~914 (2016)[DOI]
13. Belli R, "Chairside CAD", CAM materials. Part 1: Measurement of elastic constants and microstructural characterization, 2017, pp.33(1), 84~98
14. Belli R, "Chairside CAD", CAM materials. Part 1: Measurement of elastic constants and microstructural characterization, 2017, pp.33(1), 84~98
15. Wendler M, "Chairside CAD", CAM materials. Part 2: Flexural strength testing, 2017, pp.33(1), 99~109
16. D'Arcangelo C, "Wear properties of dental ceramics and porcelains compared with human enamel", J Prosthet Dent, 115(3), pp.350~355 (2016)[DOI]
17. Lawson NC, "Wear, strength, modulus and hardness of CAD", CAM restorative materials, 2016, pp.32(11), e275~e283
18. Denry IL, "Effect of heat treatment on microcrack healing behavior of a machinable dental ceramic", J Biomed Mater Res, 48(6), pp.791~796 (1999)[DOI]
19. Hung CY, "Effects of simulated clinical grinding and subsequent heat treatment on microcrack healing of a lithium disilicate ceramic", Int J Prosthodont, 21(6), pp.496~498 (2008)
20. Zimmermann M, "Digital evaluation of the fit of zirconia-reinforced lithium silicate crowns with a new three-dimensional approach", Quintessence Int, pp.9~15 (2017)
21. Zimmermann M, "Influence of material thickness on fractural strength of CAD", CAM fabricated ceramic crowns, 2017, pp.36(6), 778~783
22. Subasl MG, "Effect of thickness on optical properties of monolithic CAD-CAM ceramics", Journal of Dentistry
23. Ilie N, "Correlation between ceramics translucency and polymerization efficiency through ceramics", Dent Mater, 24(7), pp.908~914 (2008)[DOI]
24. Lawson NC, "Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing", J Dent, 42(12), pp.1586~1591 (2014)[DOI]
25. Tsitrou EA, "Brittleness index of machinable dental materials and its relation to the marginal chipping factor", J Dent, 35(12), pp.897~902 (2007)[DOI]
26. Fathy SM, "In-vitro wear of natural tooth surface opposed with zirconia reinforced lithium silicate glass ceramic after accelerated ageing", Dent Mater (2018)
27. Bindl A, "Strength and fracture pattern of monolithic CAD", CAM-generated posterior crowns, 2006, pp.22(1), 29~36
28. Al-Wahadni AM, "Fracture resistance of aluminium oxide and lithium disilicate-based crowns using different luting cements: an in vitro study", J Contemp Dent Pract, 10(2), pp.51~58 (2009)
29. Gehrt M, "Clinical results of lithium-disilicate crowns after up to 9 years of service", Clin Oral Investig, 17(1), pp.275~284 (2013)[DOI]
30. Toman M, "Clinical evaluation of 121 lithium disilicate all-ceramic crowns up to 9 years", Quintessence Int, 46(3), pp.189~197 (2015)
31. Ramakrishnaiah R, "The Effect of Hydrofluoric Acid Etching Duration on the Surface Micromorphology, Roughness, and Wettability of Dental Ceramics", Int J Mol Sci, 17(6) (2016)
32. Sato TP, "Effects of Surface Treatments on the Bond Strength Between Resin Cement and a New Zirconia-reinforced Lithium Silicate Ceramic", Oper Dent, 41(3), pp.284~292 (2016)[DOI]
33. Monteiro JB, "Fatigue failure load of zirconia-reinforced lithium silicate glass ceramic cemented to a dentin analogue: Effect of etching time and hydrofluoric acid concentration", J Mech Behav Biomed Mater, 77, pp.375~382 (2018)[DOI]
34. Sattabanasuk V, "Effects of mechanical and chemical surface treatments on the resin-glass ceramic adhesion properties", J Investig Clin Dent, 8(3) (2017)
35. Tsujimoto A, "Interfacial Characteristics and Bond Durability of Universal Adhesive to Various Substrates", Oper Dent, 42(2), pp.E59~E70 (2017)[DOI]
36. Vichi A, "Effect of Finishing and Polishing on Roughness and Gloss of Lithium Disilicate and Lithium Silicate Zirconia Reinforced Glass Ceramic for CAD", CAM Systems, 2018, pp.43(1), 90~100
37. Heintze SD, "Surface roughness and gloss of dental materials as a function of force and polishing time in vitro", Dent Mater, 22(2), pp.146~165 (2006)[DOI]
38. Al-Wahadni AM, "An in vitro investigation into the wear effects of glazed, unglazed and refinished dental porcelain on an opposing material", J Oral Rehabil, 26(6), pp.538~546 (1999)[DOI]
39. Kou W, "Surface roughness of five different dental ceramic core materials after grinding and polishing", J Oral Rehabil, 33(2), pp.117~124 (2006)[DOI]