Bulk-fill 복합레진, 믿고 사용해도 될까?
Bulk-fill composites
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Composite resin restorations in posterior teeth are increasing due to the aesthetic needs of patients and the development of materials. This trend will accelerate in line with domestic insurance policies. However, resin composites generate stresses due to their contraction during the polymerization process. To reduce the polymerization shrinkage stress of resin composites, incremental layering technique has been recommended for decades. This technique reduces stress at the cavity wall interface and allows a more efficient light curing of the material. Bulk-fill resin composites have been designed to simplify the restorative technique because they can be placed into cavities in a single increment of 4-5mm. The simplification of the operative procedures is desirable in clinical daily practice. In this context, bulk-fill resin composites are an attractive alternative for posterior restorations. However, a clearer understanding of the clinical performance of this relatively new class of materials in comparison to conventional resin composites is required. Based on previous studies, the aim of the current review was to present the clinical criteria for the use of bulk-fill composites in direct restorations of posterior teeth.
Abstract
Composite resin restorations in posterior teeth are increasing due to the aesthetic needs of patients and the development of materials. This trend will accelerate in line with domestic insurance policies. However, resin composites generate stresses due to their contraction during the polymerization process. To reduce the polymerization shrinkage stress of resin composites, incremental layering technique has been recommended for decades. This technique reduces stress at the cavity wall interface and allows a more efficient light curing of the material. Bulk-fill resin composites have been designed to simplify the restorative technique because they can be placed into cavities in a single increment of 4-5mm. The simplification of the operative procedures is desirable in clinical daily practice. In this context, bulk-fill resin composites are an attractive alternative for posterior restorations. However, a clearer understanding of the clinical performance of this relatively new class of materials in comparison to conventional resin composites is required. Based on previous studies, the aim of the current review was to present the clinical criteria for the use of bulk-fill composites in direct restorations of posterior teeth.
참고문헌 (22)
- Fronza BM, "Monomer conversion, microhardness, internal marginal adaptation, and shrinkage stress of bulk-fill resin composites", Dent Mater, 31, pp.1542~1551 (2015)
- El-Safty S, "Nanomechanical properties of dental resincomposites", Dent Mater, 28, pp.1292~1300 (2012)
- Van Ende A, "Bulkfill composites : a review ofthe current literature", J Adhes Dent, 19, pp.95~110 (2017)
- Alshali RZ, "Degree of conversion ofbulk-fill compared to conventional resin-composites at two time intervals", Dent Mater, 29, pp.e213~e217 (2013)
- Didem A, "Comparative mechanical properties of bulk-fill resins", Open. J Compos Mater, 4, pp.117~121 (2014)
- Miletic V, "Local deformation fields and marginal integrity ofsculptable bulkfill, low-shrinkage and conventional composites", Dent Mater, 32, pp.1441~1451 (2016)
- Kneˇzevi´c A, "Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodes", J Oral Rehabil, 28, pp.586~591 (2001)
- Watts DC, "Surface hardness development in light-cured composites", Dent Mater, 3, pp.265~269 (1987)
- Bouschlicher MR, "Correlation of bottom-to-top surface microhardness and conversion ratios for a variety of resin composite compositions", Operative Dentistry, 29(6), pp.698~704 (2004)
- HM El-Damanhoury, "Polymerization Shrinkage Stress Kinetics and Related Properties of Bulk-fill Resin Composites", Operative Dentistry, 39(4), pp.374~382
- A. Alrahlah, "Post-cure depth of cure of bulk fill dental resin-composites", Dent Mater, 30, pp.I49~I54
- Ruwaida Z. Alshali, "Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals", Dent Mater, 29, pp.e213~e217
- N Ilie, "Bulk-fill Resin-based Composites: An In Vitro Assessment of Their Mechanical Performance", Operative Dentistry, 38(6), pp.618~625
- Y.A. Abed, "Degree of conversion and surface hardness of bulk-fill composite versus incremental-fill composite", Tanta Dental Journal, 12, pp.71~80 (2015)
- Sabbagh J, "Dynamic and static moduli of elasticity of resin-based materials", Dental Materials, 18(1), pp.64~71 (2002)
- Leprince JG, "Physico-mechanical characteristics of commercially available bulk-fill composites", Journal of Dentistry, 42(8), pp.993~1000 (2014)
- Jang JH, "Polymerization shrinkage and depth of cure of bulk-fill resin composites and highly filled flowable resin", Oper Dent, 40, pp.172~180 (2015)
- Sirley Raiane Mamede Veloso, "Clinical performance of bulk-fill and conventional resin composite restorations in posterior teeth: a systematic review and meta-analysis", Clinical Oral Investigations, 23(1), pp.221~233 (2019), Springer Science and Business Media LLC[DOI]
- Jan W.V. van Dijken, "Posterior bulkfilled resin composite restorations: A 5-year randomized controlled clinical study", Journal of Dentistry, 51, pp.29~35 (2016)
- van Dijken JWV, "Bulk-filled posterior resin restorations based on stressdecreasing resin technology : a randomized, controlled 6-year evaluation", Eur J Oral Sci, 125, pp.303~309 (2017)
- Julian G. Leprince, "Physico-mechanical characteristics of commercially available bulk-fill composites", journal of dentistry, 42, pp.993~1000
- D. Papadogiannis, "Viscoelastic properties, creep behavior and degree of conversion of bulk fill composite resins", Dental materials, 31, pp.1533~1541