Discontinuity in GNSS Coordinate Time Series due to Equipment Replacement
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The GNSS coordinate time series is used as important data for geophysical analysis such as terrestrial reference frame establishment, crustal deformation, Earth orientation parameter estimation, etc. However, various factors may cause discontinuity in the coordinate time series, which may lead to errors in the interpretation. In this paper, we describe the discontinuity in the coordinate time series due to the equipment replacement for domestic GNSS stations and discuss the change in movement magnitude and velocity vector difference in each direction before and after discontinuity correction. To do this, we used three years (2017-2019) of data from 40 GNSS stations. The average magnitude of the velocity vector in the north-south, east-west, and vertical directions before correction is -12.9±1.5, 28.0±1.9, and 4.2±7.6 mm/yr, respectively. After correction, the average moving speed in each direction was -13.0±1.0, 28.2±0.8, and 0.7±2.1 mm/yr, respectively. The average magnitudes of the horizontal GNSS velocity vectors before and after discontinuous correction was similar, but the deviation in movement size of stations decreased after correction. After equipment replacement, the change in the vertical movement occurred more than the horizontal movement variation. Moreover, the change in the magnitude of movement in each direction may also cause a change in the velocity vector, which may lead to errors in geophysical analysis.
Abstract
The GNSS coordinate time series is used as important data for geophysical analysis such as terrestrial reference frame establishment, crustal deformation, Earth orientation parameter estimation, etc. However, various factors may cause discontinuity in the coordinate time series, which may lead to errors in the interpretation. In this paper, we describe the discontinuity in the coordinate time series due to the equipment replacement for domestic GNSS stations and discuss the change in movement magnitude and velocity vector difference in each direction before and after discontinuity correction. To do this, we used three years (2017-2019) of data from 40 GNSS stations. The average magnitude of the velocity vector in the north-south, east-west, and vertical directions before correction is -12.9±1.5, 28.0±1.9, and 4.2±7.6 mm/yr, respectively. After correction, the average moving speed in each direction was -13.0±1.0, 28.2±0.8, and 0.7±2.1 mm/yr, respectively. The average magnitudes of the horizontal GNSS velocity vectors before and after discontinuous correction was similar, but the deviation in movement size of stations decreased after correction. After equipment replacement, the change in the vertical movement occurred more than the horizontal movement variation. Moreover, the change in the magnitude of movement in each direction may also cause a change in the velocity vector, which may lead to errors in geophysical analysis.
참고문헌 (19)
- Baek, J., "Coseismic and post-seismic crustal deformations of the Korean Peninsula caused by the 2011 Mw 9.0 Tohoku earthquake, Japan, from global positioning system data", Terra Nova, 24, pp.295~300 (2012)[DOI]
- Blewitt, G, "Effect of annual signals on geodetic velocity", J. Geophys. Res, 107, pp.B72145~ (2002)[DOI]
- Bruni, S., "Detecting discontinuities in GNSS coordinate time series with STARS: case study, the Bologna and Medicina GPS sites", J. Geod, 88, pp.1203~1214 (2014)[DOI]
- Byung-Kyu Choi, "GNSS Antenna PCO", PCV and Position Changes due to the Switch IGS08, igs14.atx, pp.Journal of Positioning, Navigation, and Timing, 2022[DOI]
- Crocetti, L., "Discontinuity Detection in GNSS Station Coordinate Time Series Using Machine Learning", Remote Sens, 13, pp.3906~ (2021)[DOI]
- Dach, R., "Bernese GNSS Software Version 5.2. User manual" (2015), Publikation Digital AG
- Draper, N. R, "Applied Regression Analysis" (1998), John Wiley & Sons
- Ergintav, S., "Postseismic deformation near the Izmit earthquake (17 August 1999, M 7.5) rupture zone", Bull. Seismol. Soc. Am, 92, pp.194~207 (2002)[DOI]
- Frankel, K. L., "Spatial and temporal constancy of seismic strain release along an evolving segment of the Pacific-North America plate boundary", Earth and Planetary Science Letters, 304, pp.565~576 (2011)[DOI]
- Gazeaux, J., "Detecting offsets in GPS time series: first results from the detection of offsets in GPS experiment", J. Geophys. Res. Solid Earth, 118, pp.2397~2407 (2013)[DOI]
- "GNSS DATA CENTER"[URL]
- 김두식, "Correction of Coordinate Discontinuities Caused by GPS Antenna Replacements", Journal of Positioning, Navigation, and Timing, 4(3), pp.131~140 (2015), 사단법인 항법시스템학회[DOI]
- Kim, S., "Crustal Deformation of South Korea After the Tohoku-Oki Earthquake: Deformation Heterogeneity and Seismic Activity", Tectonics, 37, pp.2389~2403 (2018)[DOI]
- 2020 Seismological Annual Report, "Korea Meteorological Administration", KMA, ~ (2021)
- Masson, C., "Precision of continuous GPS velocities from statistical analysis of synthetic time series", Solid Earth, 10, pp.329~342 (2019)[DOI]
- Santamaría-Gómez, A., "Mitigating the effects of vertical land motion in tide gauge records using a state-of-the-art GPS velocity field", Global and Planetary Change, 98-99, pp.6~17 (2012)[DOI]
- Shao, Z, "Analysis of the far-field co-seismic and post-seismic responses caused by the 2011 MW 9.0 Tohoku-Oki earthquake", Pure Appl. Geophys, 173, pp.411~424 (2016)
- Sohn, D. -H., "Decaying Post-Seismic Deformation Observed on the Korean Peninsula Following the 2011 Tohoku-Oki Earthquake", Sensors, 21, pp.4493~ (2021)[DOI]
- Wöppelmann, G, "Vertical land motion as a key to understanding sea level change and variability", Rev. Geophys, 54, pp.64~92 (2016)[DOI]