Carrier Phase Based Cycle Slip Detection and Identification Algorithm for the Integrity Monitoring of Reference Stations
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In order to ensure the high-integrity of reference stations of satellite navigation system, cycle slip should be precisely monitored and compensated. In this paper, we proposed a cycle slip algorithm for the integrity monitoring of the reference stations. Unlike the legacy method using the Melbourne-Wübbena (MW) combination and ionosphere combination, the proposed algorithm is based on ionosphere combination only, which uses high precision carrier phase observations without pseudorange observations. Two independent and complementary ionosphere combinations, Ionospheric Negative (IN) and Ionospheric Positive (IP), were adopted to avoid insensitive cycle slip pairs. In addition, a second-order time difference was applied to the IN and IP combinations to minimize the influence of ionospheric and tropospheric delay even under severe atmosphere conditions. Then, the cycle slip was detected by the thresholds determined based on error propagation rules, and the cycle slip was identified through weighted least square method. The performance of the proposed cycle slip algorithm was validated with the 1 Hz dual-frequency carrier phase data collected under the difference levels of ionospheric activities. For this experiment, 15 insensitive cycle slip pairs were intentionally inserted into the raw carrier phase observations, which is difficult to be detected with the traditional cycle slip approach. The results indicate that the proposed approach can successfully detect and compensate all of the inserted cycle slip pairs regardless of ionospheric activity. As a consequence, the proposed cycle slip algorithm is confirmed to be suitable for the reference station where real time high-integrity monitoring is crucial.
Abstract
In order to ensure the high-integrity of reference stations of satellite navigation system, cycle slip should be precisely monitored and compensated. In this paper, we proposed a cycle slip algorithm for the integrity monitoring of the reference stations. Unlike the legacy method using the Melbourne-Wübbena (MW) combination and ionosphere combination, the proposed algorithm is based on ionosphere combination only, which uses high precision carrier phase observations without pseudorange observations. Two independent and complementary ionosphere combinations, Ionospheric Negative (IN) and Ionospheric Positive (IP), were adopted to avoid insensitive cycle slip pairs. In addition, a second-order time difference was applied to the IN and IP combinations to minimize the influence of ionospheric and tropospheric delay even under severe atmosphere conditions. Then, the cycle slip was detected by the thresholds determined based on error propagation rules, and the cycle slip was identified through weighted least square method. The performance of the proposed cycle slip algorithm was validated with the 1 Hz dual-frequency carrier phase data collected under the difference levels of ionospheric activities. For this experiment, 15 insensitive cycle slip pairs were intentionally inserted into the raw carrier phase observations, which is difficult to be detected with the traditional cycle slip approach. The results indicate that the proposed approach can successfully detect and compensate all of the inserted cycle slip pairs regardless of ionospheric activity. As a consequence, the proposed cycle slip algorithm is confirmed to be suitable for the reference station where real time high-integrity monitoring is crucial.
참고문헌 (12)
- Bisnath, S. B., "A New Approach to an Old Problem: Carrier-Phase Cycle Slips", GPS World, 13, pp.42~49 (2001)
- Blewitt, G., "An automatic editing algorithm for GPS data", Geophys. Res. Lett., 17, pp.199~202 (1990)
- Cai, C., "Cycle slip detection and repair for undifferenced GPS observations under high ionospheric activity", GPS Solutions, 17, pp.247~260 (2013)[DOI]
- Goad, C. C., "Precise positioning with the global position system", Proceedings of 3rd international symposium on inertial technology for surveying and geodesy, pp.745~756 (1985)
- Donguk Kim, "A New Algorithm for High-Integrity Detection and Compensation of Dual-Frequency Cycle Slip under Severe Ionospheric Storm Conditions", Sensors, 18(11), pp.3654~ (2018), MDPI AG[DOI]
- Liu, Z, "A new automated cycle slip detection and repair method for a single dual-frequency GPS receiver", J Geod, 85, pp.171~183 (2011)[DOI]
- Melbourne, W. G., "The case for ranging in GPS based geodetic systems", Proceedings of the 1st international symposium on precise positioning with the global positioning system, pp.373~386 (1985)
- Olynik, M., "Temporal Characteristics of GPS Error Sources and Their Impact on Relative Positioning", Master, pp.2002
- Olynik M., "Temporal impact of selected GPS errors on point positioning", GPS Solutions, 6(1-2), pp.47~57 (2002), Springer Science and Business Media LLC[DOI]
- Byungwoon Park, "RRC unnecessary for DGPS messages", IEEE Transactions on Aerospace and Electronic Systems, 42(3), pp.1149~1160 (2006), Institute of Electrical and Electronics Engineers (IEEE)[DOI]
- Wübbena, G., "Software developments for geodetic positioning with GPS using TI 4100 code and carrier measurements", proceedings 1st international symposium on precise positioning with the global positioning system, pp.403~412 (1985)
- 윤영선, "비정규분포 측정치 오차를 고려한 DGNSS 사용자 무결성 감시 기능에 관한 연구", 박사, 기계항공공학, pp.2007