Vehicle Reference Dynamics Estimation by Speed and Heading Information Sensed from a Distant Point
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
As intelligent autonomous driving vehicle development has become a big topic around the world, accurate reference dynamics estimation has been more important than before. Current systems generally use speed and heading information sensed from a distant point as a vehicle reference dynamic, however, the dynamics between different points are not same especially during rotating motions. In order to estimate properly estimate the reference dynamics from the information such as velocity and heading sensed at a point distant from the reference point such as center of gravity, this study proposes estimating reference dynamics from any location in the vehicle by combining the Bicycle and Ackermann models. A test system was constructed by implementing multiple GNSS/INS equipment on an Robot Operating System (ROS) and an actual car. Angle and speed errors of 10° and 0.2 m/s have been reduced to 0.2° and 0.06 m/s after applying the suggested method.
Abstract
As intelligent autonomous driving vehicle development has become a big topic around the world, accurate reference dynamics estimation has been more important than before. Current systems generally use speed and heading information sensed from a distant point as a vehicle reference dynamic, however, the dynamics between different points are not same especially during rotating motions. In order to estimate properly estimate the reference dynamics from the information such as velocity and heading sensed at a point distant from the reference point such as center of gravity, this study proposes estimating reference dynamics from any location in the vehicle by combining the Bicycle and Ackermann models. A test system was constructed by implementing multiple GNSS/INS equipment on an Robot Operating System (ROS) and an actual car. Angle and speed errors of 10° and 0.2 m/s have been reduced to 0.2° and 0.06 m/s after applying the suggested method.
참고문헌 (9)
- Arvind, V., "Optimizing the turning radius of a vehic-le using symmetric four wheel steering system", International Journal of Scientific & Engineering Research, 4, pp.2177~2184 (2013)
- Hewage, D. C., "Wheel Speed Control Algorithm for Rear Wheel Motor Driven Vehicle", Journal of Engineering and Technology of the Open University of Sri Lanka (JET-OUSL), 4, pp.12~26 (2016)
- 이명수, "차량무게중심의 측정 및 추정에 관한 연구", 한국자동차공학회 논문집, 18(5), pp.91~99 (2010), 한국자동차공학회
- Melendez-Pastor, C., "A data fusion system of GNSS data and on-vehicle sensors data for improving car positioning precision in urban environments", Expert Systems with Applications, 80, pp.28~38 (2017)[DOI]
- Min, H., "Kinematic and Dynamic Vehicle Model-Assisted Global Positioning Method for Autonomous Vehicles with Low-Cost GPS", Camera, Sensors, pp.2019, 19[DOI]
- Nam, K., "Wheel Slip Control for Improving Traction-Ability and Energy Efficiency of a Personal Electric Vehicle", Energies, 8, pp.6820~6840 (2015)[DOI]
- Polack, P., "The kinematic bicycle model: A consistent model for planning feasible trajectories for autonomous vehicles?", 2017 IEEE Intelligent Vehicles Symposium (IV), pp.812~818 (2017)
- Vu, T. M., "Model Predictive Control for Autonomous Driving Vehicles", Electronics, 10, pp.2593~ (2021)[DOI]
- Xu, S., "Accurate and Smooth Speed Control for an Autonomous Vehicle", 2018 IEEE Intelligent Vehicles Symposium (IV), pp.1976~1982 (2018)