Estimation and Validation of Taper Equations for Three Major Coniferous Species in Gangwon and North Gyeongsang Provinces of South Korea
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study was carried out to estimate the parameters of stem taper functions, to figure out the best taper model by species, and to compare with previous studies by species, targeting on the stemmed tree samples collected from the Korean red pine (Pinus densiflora), Korean white pine (Pinus koraiensis), and Japanese larch (Larix kaempferi) stands in Gangwon and North Gyeongsang provinces of South Korea. The seven widely used models were applied in this study, and Muhairwe 1999 model for Korean red pine and Korean white pine and Kozak 2002 model for Japanese larch were evaluated as the best model for each species according to the fit statistics and the predicted stem form comparison. In addition, the predicted diameter was suitably fitted when comparing the previous studies, and the values were more appropriate following stem taper according to neiloid, paraboloid, and cone parts by species. Consequently, the estimation of this study was considered to represent the stem taper well. When comparing stem taper of three species, the diameter was largest in Korean white pine. Overall, the taper models of this study are judged to be useful for estimating stem form and volume computation of Korean red pine, Korean white pine, and Japanese larch.
Abstract
This study was carried out to estimate the parameters of stem taper functions, to figure out the best taper model by species, and to compare with previous studies by species, targeting on the stemmed tree samples collected from the Korean red pine (Pinus densiflora), Korean white pine (Pinus koraiensis), and Japanese larch (Larix kaempferi) stands in Gangwon and North Gyeongsang provinces of South Korea. The seven widely used models were applied in this study, and Muhairwe 1999 model for Korean red pine and Korean white pine and Kozak 2002 model for Japanese larch were evaluated as the best model for each species according to the fit statistics and the predicted stem form comparison. In addition, the predicted diameter was suitably fitted when comparing the previous studies, and the values were more appropriate following stem taper according to neiloid, paraboloid, and cone parts by species. Consequently, the estimation of this study was considered to represent the stem taper well. When comparing stem taper of three species, the diameter was largest in Korean white pine. Overall, the taper models of this study are judged to be useful for estimating stem form and volume computation of Korean red pine, Korean white pine, and Japanese larch.
참고문헌 (20)
- Burkhart HE, "Modeling forest trees and stands", pp.457~ (2012), Springer
- Demaerschalk JP., "Converting volume equations to compatible taper equations", For Sci, 18, pp.241~245 (1972)
- Jung SC, "Evaluation of some stem taper models for Camellia japonica in Mount Halla, Korea", J Mt Sci, 12, pp.1395~1402 (2015)
- 강진택, "수간곡선 모델을 이용한 소나무의 지방별 수간재적표 개발", 한국농림기상학회지, 16(4), pp.327~335 (2014), 한국농림기상학회[DOI]
- 강진택, "Kozak 수간곡선 모델을 이용한 낙엽송의지방별 수간재적표 개발", 농업생명과학연구, 48(6), pp.119~131 (2014), 농업생명과학연구원[DOI]
- Kim DG, "Stem taper equation and bark thickness estimation equation for Pinus densiflora in Uljin, Gyeongbuk", Korean J For Meas, 5, pp.10~16 (2002)
- Domestic timber distribution condition and implication. Research report, "Kim KD.", National Institute of Forest Science, 16~ (2017)
- Korea Forest Service., "2016 Statistical yearbook of forestry", Korea Forest Service, 414~ (2016)
- Kozak A., "A variable-exponent taper equation", Can J For Res, 18, pp.1363~1368 (1988)
- Kozak A., "My last words on taper equations", For Chron, 80, pp.507~515 (2004)
- Larson PR., "Stem form development of forest trees", For Sci Monograph, 5, pp.a0001~ (1963)
- 이대성, "Estimating Wood Weight Change on Air Drying Times for Three Coniferous Species of South Korea", Journal of forest and environmental science, 32(3), pp.262~269 (2016), 산림과학연구소
- 이대성, "Estimation and validation of stem volume equations for Pinus densiflora, Pinus koraiensis, and Larix kaempferi in South Korea", Forest Science and Technology, 13(2), pp.77~82 (2017), 한국산림과학회[DOI]
- Lee WK, "Modeling stem profiles for Pinus densiflora in Korea", For Ecol Manag, 172, pp.69~77 (2003)
- Max TA, "Segmented polynomial regression applied to taper equations", For Sci, 22, pp.283~289 (1976)
- Muhairwe CK, "Effects of adding tree, stand, and site variables to Kozak’s variable-exponent taper equation", Can J For Res, 24, pp.252~259 (1994)
- Muhairwe CK., "Taper equations for Eucalyptus pilularis and Eucalyptus grandis for the north coast in New South Wales, Australia", For Ecol Manag, 113, pp.251~269 (1999)
- SAS Institute Inc., "SAS", STAT 9.4 user’s guide, 2013, pp.356~
- Son YM, "Estimation of stem taper equations and growth pattern in Pinus koraiensis by two district", Kor J For Meas, 7, pp.9~14 (2004)
- 손영모, "남부지방 해송의 수간곡선 추정식 개발", 농업생명과학연구, 47(4), pp.21~27 (2013), 농업생명과학연구원