Comparison of light transmittance in different thicknesses of zirconia under various light curing units
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
PURPOSE. The objective of this study was to compare the light transmittance of zirconia in different thicknesses using various light curing units. MATERIALS AND METHODS. A total of 21 disc-shaped zirconia specimens (5 mm in diameter) in different thicknesses (0.3, 0.5 and 0.8 mm) were prepared. The light transmittance of the specimens under three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) was compared by using a hand-held radiometer. Statistical significance was determined using two-way ANOVA (α=.05). RESULTS. ANOVA revealed that thickness of zirconia and light curing unit had significant effects on light transmittance (P<.001). CONCLUSION. Greater thickness of zirconia results in lower light transmittance. Light-emitting diodes light-curing units might be considered as effective as Plasma arc light-curing units or more effective than Quartz-tungsten-halogen light-curing units for polymerization of the resin-based materials.
Abstract
PURPOSE. The objective of this study was to compare the light transmittance of zirconia in different thicknesses using various light curing units. MATERIALS AND METHODS. A total of 21 disc-shaped zirconia specimens (5 mm in diameter) in different thicknesses (0.3, 0.5 and 0.8 mm) were prepared. The light transmittance of the specimens under three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) was compared by using a hand-held radiometer. Statistical significance was determined using two-way ANOVA (α=.05). RESULTS. ANOVA revealed that thickness of zirconia and light curing unit had significant effects on light transmittance (P<.001). CONCLUSION. Greater thickness of zirconia results in lower light transmittance. Light-emitting diodes light-curing units might be considered as effective as Plasma arc light-curing units or more effective than Quartz-tungsten-halogen light-curing units for polymerization of the resin-based materials.
참고문헌 (16)
- Turp V, "Influence of zirconia base and shade difference on polymerization efficiency of dual-cure resin cement", J Prosthodont, 20, pp.361~365 (2011)
- Shiraishi T, "Optical properties of base dentin ceramics for all-ceramic restorations", Dent Mater, 27, pp.165~172 (2011)
- Rasetto FH, "Light transmission through all-ceramic dental materials: a pilot study", J Prosthet Dent, 91, pp.441~446 (2004)
- Touati B, "Light transmission in bonded ceramic restorations", J Esthet Dent, 5, pp.11~18 (1993)
- Heffernan MJ, "Relative translucency of six allceramic systems. Part I: core materials", J Prosthet Dent, 88, pp.4~9 (2002)
- Baldissara P, "Translucency of zirconia copings made with different CAD", CAM systems, 2010, pp.104, 6~12
- Jung H, "Polymerization efficiency of different photocuring units through ceramic discs", Oper Dent, 31, pp.68~77 (2006)
- Ceballos L, "Curing effectiveness of resin composites at different exposure times using LED and halogen units", Med Oral Patol Oral Cir Bucal, 14, pp.51~56 (2009)
- Jung H, "Polymerization efficiency of different photocuring units through ceramic discs", Oper Dent, 31, pp.68~77 (2006)
- Koran P, "Effect of sequential versus continuous irradiation of a light-cured resin composite on shrinkage, viscosity, adhesion, and degree of polymerization", Am J Dent, 11, pp.17~22 (1998)
- Jung H, "Curing efficiency of different polymerization methods through ceramic restorations", Clin Oral Investig, 5, pp.156~161 (2001)
- Mobarak E, "Effect of LED light-curing on the relative hardness of tooth-colored restorative materials", Oper Dent, 34, pp.65~71 (2009)
- Cekic I, "Ceramic-dentin bonding: effect of adhesive systems and light-curing units", J Adhes Dent, 9, pp.17~23 (2007)
- Price RB, "Effects of resin composite composition and irradiation distance on the performance of curing lights", Biomaterials, 25, pp.4465~4477 (2004)
- O'Keefe KL, "Variables affecting the spectral transmittance of light through porcelain veneer samples", J Prosthet Dent, 66, pp.434~438 (1991)
- de Oyagu¨e RC, "Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic", Dent Mater, 25, pp.172~179 (2009)