A hollow definitive obturator fabrication technique for management of partial maxillectomy
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Maxillary obturator prosthesis is the most frequent treatment option for management of partial or total maxillectomy. Heavy weight of the obturators is often a dislocating factor. Hollowing the prosthesis to reduce its weight is the well established fact. The alternate technique to hollow-out the prosthesis has been described in this article which is a variation of previously described processing techniques. A pre-shaped wax-bolus was incorporated inside the flasks during packing of the heat-polymerized acrylic resin to automatically create the hollow space. The processing technique described is a single step flasking procedure to construct a closed-hollow-obturator prosthesis as a single unit. To best understand the technique, this article describes management of a patient who had undergone partial maxillectomy secondary to squamous cell carcinoma rehabilitated with a hollow-obturator prosthesis.
Abstract
Maxillary obturator prosthesis is the most frequent treatment option for management of partial or total maxillectomy. Heavy weight of the obturators is often a dislocating factor. Hollowing the prosthesis to reduce its weight is the well established fact. The alternate technique to hollow-out the prosthesis has been described in this article which is a variation of previously described processing techniques. A pre-shaped wax-bolus was incorporated inside the flasks during packing of the heat-polymerized acrylic resin to automatically create the hollow space. The processing technique described is a single step flasking procedure to construct a closed-hollow-obturator prosthesis as a single unit. To best understand the technique, this article describes management of a patient who had undergone partial maxillectomy secondary to squamous cell carcinoma rehabilitated with a hollow-obturator prosthesis.
참고문헌 (42)
- Spiro RH, "Maxillectomy and its classification", Head Neck, 19, pp.309~314 (1997)
- Cummings CW, "Cummings otolaryngology: head and neck surgery. 4th ed", pp.1604~1608 (2004), Elsevier
- Rieger J, "Speech outcomes in patients rehabilitated with maxillary obturator prostheses after maxillectomy: a prospective study", Int J Prosthodont, 15, pp.139~144 (2002)
- Mukohyama H, "Rehabilitation of a bilateral maxillectomy patient with a free fibula osteocutaneous flap", J Oral Rehabil, 32, pp.541~544 (2005)
- Pigno MA, "Conventional prosthetic rehabilitation after free flap reconstruction of a maxillectomy defect: a clinical report", J Prosthet Dent, 86, pp.578~581 (2001)
- Genden EM, "Comparison of functional and quality- of-life outcomes in patients with and without palatomaxillary reconstruction: a preliminary report", Arch Otolaryngol Head Neck Surg, 129, pp.775~780 (2003)
- Kornblith AB, "Quality of life of maxillectomy patients using an obturator prosthesis", Head Neck, 18, pp.323~334 (1996)
- Wu YL, "Comparison of weight reduction in different designs of solid and hollow obturator prostheses", J Prosthet Dent, 62, pp.214~217 (1989)
- Brown KE, "Clinical considerations improving obturator treatment", J Prosthet Dent, 24, pp.461~466 (1970)
- Desjardins RP, "Obturator prosthesis design for acquired maxillary defects", J Prosthet Dent, 39, pp.424~435 (1978)
- McAndrew KS, "Judson C. Hickey Scientific Writing Awards. An innovative investment method for the fabrication of a closed hollow obturator prosthesis", J Prosthet Dent, 80, pp.129~132 (1998)
- Phankosol P, "Hollow obturator with removable lid", J Prosthet Dent, 54, pp.98~100 (1985)
- Taicher S, "A technique for fabrication of polydimethylsiloxane-acrylic resin obturators", J Prosthet Dent, 50, pp.65~68 (1983)
- Benington IC., "Light-cured hollow obturators", J Prosthet Dent, 62, pp.322~325 (1989)
- Polyzois GL, "Light-cured combination obturator prosthesis", J Prosthet Dent, 68, pp.345~347 (1992)
- Matalon V, "A simplified method for making a hollow obturator", J Prosthet Dent, 36, pp.580~582 (1976)
- Schneider A, "Method of fabricating a hollow obturator", J Prosthet Dent, 40, pp.351~ (1978)
- Birnbach S, "Direct conversion of a solid obturator to a hollow obturator prosthesis", J Prosthet Dent, 62, pp.58~60 (1989)
- Parel SM, "Single-visit hollow obturators for edentulous patients", J Prosthet Dent, 40, pp.426~429 (1978)
- Brown KE, "Fabrication of a hollow-bulb obturator", J Prosthet Dent1969, 21, pp.97~103 (1969)
- Browning JD, "Fabrication of a hollow obturator with fluid resin", J Prosthet Dent, 52, pp.891~895 (1984)
- el Mahdy AS, "Processing a hollow obturator", J Prosthet Dent, 22, pp.682~686 (1969)
- Asher ES, "Technique for quick conversion of an obturator into a hollow bulb", J Prosthet Dent, 85, pp.419~420 (2001)
- Chalian VA, "A new technique for constructing a one-piece hollow obturator after partial maxillectomy", J Prosthet Dent, 28, pp.448~453 (1972)
- Tanaka Y, "A simplified technique for fabricating a lightweight obturator", J Prosthet Dent, 38, pp.638~642 (1977)
- Worley JL, "A method for controlling the thickness of hollow obturator prostheses", J Prosthet Dent, 50, pp.227~229 (1983)
- Minsley GE, "An alternative method for fabrication of a closed hollow obturator", J Prosthet Dent, 55, pp.485~490 (1986)
- Beumer J, "Maxillofacial rehabilitation prosthodontic and surgical consideration", pp.225~247 (1996), Ishiyaku Euroamerica
- Hayashi J, "Construction of a maxillary prosthesis with a hollow obturator by the balloon technique and a case report", J Nihon Univ Sch Dent, 31, pp.585~596 (1989)
- Beder OE, "Rapid technique for constructing a hollow- bulb provisional obturator", J Prosthet Dent, 39, pp.237~239 (1978)
- Nidiffer TJ, "The hollow bulb obturator for acquired palatal openings", J Prosthet Dent, 7, pp.126~134 (1957)
- Buckner H, "Construction of a denture with hollow obturator, lid, and soft acrylic lining", J Prosthet Dent, 31, pp.95~99 (1974)
- Palmer B, "Fabrication of the hollow bulb obturator", J Prosthet Dent, 53, pp.595~596 (1985)
- Gardner LK, "Combination nasal support breathing flange with hollow obturator prosthesis. A clinical report", J Prosthet Dent, 63, pp.497~501 (1990)
- Blair FM, "The hollow box maxillary obturator", Br Dent J, 184, pp.484~487 (1998)
- Habib BH, "Fabrication of a closed hollow obturator", J Prosthet Dent, 91, pp.383~385 (2004)
- Kocacikli M, "Fabricating a hollow obturator with visible light-cured resin system", J Prosthodont, 17, pp.596~598 (2008)
- Shimizu H, "An alternative procedure for fabricating a hollow interim obturator for a partial maxillectomy patient", J Prosthodont, 18, pp.276~278 (2009)
- Elangovan S, "Two-piece hollow bulb obturator", Indian J Dent Res, 22, pp.486~488 (2011)
- Patil PG, "Fabrication of a hollow obturator as a single unit for management of bilateral subtotal maxillectomy", J Prosthodont, 21, pp.194~199 (2012)
- McGarry TJ, "Classification system for partial edentulism", J Prosthodont, 11, pp.181~193 (2002)
- Morrow RM, "Dental laboratory procedures complete dentures. 2nd ed", pp.312~338 (1986), Mosby