Comparison of the fracture resistances of glass fiber mesh- and metal mesh-reinforced maxillary complete denture under dynamic fatigue loading
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this study was to investigate the effect of reinforcing materials on the fracture resistances of glass fiber mesh- and Cr–Co metal mesh-reinforced maxillary complete dentures under fatigue loading. MATERIALS AND METHODS. Glass fiber mesh- and Cr–Co mesh-reinforced maxillary complete dentures were fabricated using silicone molds and acrylic resin. A control group was prepared with no reinforcement (n = 15 per group). After fatigue loading was applied using a chewing simulator, fracture resistance was measured by a universal testing machine. The fracture patterns were analyzed and the fractured surfaces were observed by scanning electron microscopy. RESULTS. After cyclic loading, none of the dentures showed cracks or fractures. During fracture resistance testing, all unreinforced dentures experienced complete fracture. The mesh-reinforced dentures primarily showed posterior framework fracture. Deformation of the all-metal framework caused the metal mesh-reinforced denture to exhibit the highest fracture resistance, followed by the glass fiber meshreinforced denture (P<.05) and the control group (P<.05). The glass fiber mesh-reinforced denture primarily maintained its original shape with unbroken fibers. River line pattern of the control group, dimples and interdendritic fractures of the metal mesh group, and radial fracture lines of the glass fiber group were observed on the fractured surfaces. CONCLUSION. The glass fiber mesh-reinforced denture exhibits a fracture resistance higher than that of the unreinforced denture, but lower than that of the metal mesh-reinforced denture because of the deformation of the metal mesh. The glass fiber mesh-reinforced denture maintains its shape even after fracture, indicating the possibility of easier repair.
Abstract
PURPOSE. The aim of this study was to investigate the effect of reinforcing materials on the fracture resistances of glass fiber mesh- and Cr–Co metal mesh-reinforced maxillary complete dentures under fatigue loading. MATERIALS AND METHODS. Glass fiber mesh- and Cr–Co mesh-reinforced maxillary complete dentures were fabricated using silicone molds and acrylic resin. A control group was prepared with no reinforcement (n = 15 per group). After fatigue loading was applied using a chewing simulator, fracture resistance was measured by a universal testing machine. The fracture patterns were analyzed and the fractured surfaces were observed by scanning electron microscopy. RESULTS. After cyclic loading, none of the dentures showed cracks or fractures. During fracture resistance testing, all unreinforced dentures experienced complete fracture. The mesh-reinforced dentures primarily showed posterior framework fracture. Deformation of the all-metal framework caused the metal mesh-reinforced denture to exhibit the highest fracture resistance, followed by the glass fiber meshreinforced denture (P<.05) and the control group (P<.05). The glass fiber mesh-reinforced denture primarily maintained its original shape with unbroken fibers. River line pattern of the control group, dimples and interdendritic fractures of the metal mesh group, and radial fracture lines of the glass fiber group were observed on the fractured surfaces. CONCLUSION. The glass fiber mesh-reinforced denture exhibits a fracture resistance higher than that of the unreinforced denture, but lower than that of the metal mesh-reinforced denture because of the deformation of the metal mesh. The glass fiber mesh-reinforced denture maintains its shape even after fracture, indicating the possibility of easier repair.
참고문헌 (18)
- Jagger DC, "The reinforcement of dentures", J Oral Rehabil, 26, pp.185~194 (1999)
- el Ghazali S, "On the clinical deformation of maxillary complete dentures. Influence of denture-base design and shape of denture-bearing tissue", Acta Odontol Scand, 47, pp.69~76 (1989)
- Geurtsen W, "Biocompatibility of dental casting alloys", Crit Rev Oral Biol Med, 13, pp.71~84 (2002)
- Kim SH, "The effect of reinforcement with woven E-glass fibers on the impact strength of complete dentures fabricated with high-impact acrylic resin", J Prosthet Dent, 91, pp.274~280 (2004)
- Hedzelek W, "Mechanical strength of an acrylic resin palatal denture base reinforced with a mesh or bundle of glass fibers", Int J Prosthodont, 20, pp.311~312 (2007)
- Yu SH, "Effects of glass fiber mesh with different fiber content and structures on the compressive properties of complete dentures", J Prosthet Dent, 113, pp.636~644 (2015)
- Takahashi Y, "Effect of location of glass fiber-reinforced composite reinforcement on the flexural properties of a maxillary complete denture in vitro", Acta Odontol Scand, 69, pp.215~221 (2011)
- Vallittu PK, "Flexural properties of acrylic resin polymers reinforced with unidirectional and woven glass fibers", J Prosthet Dent, 81, pp.318~326 (1999)
- Vallittu PK, "Transverse strength and fatigue of denture acrylic-glass fiber composite", Dent Mater, 10, pp.116~121 (1994)
- Vallittu PK, "A review of fiber-reinforced denture base resins", J Prosthodont, 5, pp.270~276 (1996)
- Fontijn-Tekamp FA, "Biting and chewing in overdentures, full dentures, and natural dentitions", J Dent Res, 79, pp.1519~1524 (2000)
- Michael CG, "Biting strength and chewing forces in complete denture wearers", J Prosthet Dent, 63, pp.549~553 (1990)
- Bates JF, "Masticatory function-a review of the literature: (II) Speed of movement of the mandi-ble, rate of chewing and forces developed in chewing", J Oral Rehabil, 2, pp.349~361 (1975)
- Wiskott HW, "Stress fatigue: basic principles and prosthodontic implications", Int J Prosthodont, 8, pp.105~116 (1995)
- Praveen B, "Comparison of impact strength and fracture morphology of different heat cure denture acrylic resins: An in vitro study", J Int Oral Health, 6, pp.12~16 (2014)
- Purslow D, "Matrix fractography of fibre-reinforced epoxy composites", Composites, 17, pp.289~303 (1986)
- Dharmar S, "Radiographic and metallographic evaluation of porosity defects and grain structure of cast chromium cobalt removable partial dentures", J Prosthet Dent, 69, pp.369~373 (1993)
- Kuroda S, "Measuring the effects of water immersion conditions on the durability of fiber-reinforced hybrid composite resin using static and dynamic tests", Dent Mater J, 31, pp.449~457 (2012)