Microtensile bond strength of resin cement primer containing nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) to human dentin
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The purpose of the current study was to evaluate the effect of incorporating nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) into a self-etching primer of a resin cement on the microtensile bond strength of dentin, regarding the proven antibacterial feature of NAg and remineralizing effect of NACP. MATERIALS AND METHODS. Flat, mid-coronal dentin from 20 intact extracted human third molars were prepared for cementation using Panavia F2.0 cement. The teeth were randomly divided into the four test groups (n=5) according to the experimental cement primer composition: cement primer without change (control group), primer with 1% (wt) of NACP, primer with 1% (wt) of physical mixture of NACP+Nag, and primer with 1% (wt) of chemical mixture of NACP+Nag. The resin cement was used according to the manufacturer’s instructions. After storage in distilled water at 37℃ for 24 h, the bonded samples were sectioned longitudinally to produce 1.0 × 1.0 mm beams for micro-tensile bond strength testing in a universal testing machine. Failure modes at the dentin-resin interface were observed using a stereomicroscope. The data were analyzed by one-way ANOVA and Tukey’s post-hoc tests and the level of significance was set at 0.05. RESULTS. The lowest mean microtensile bond strength was obtained for the NACP group. Tukey’s test showed that the bond strength of the control group was significantly higher than those of the other experimental groups, except for group 4 (chemical mixture of NACP and NAg; P=.67). CONCLUSION. Novel chemical incorporation of NAg-NACP into the self-etching primer of resin cement does not compromise the dentin bond strength.
Abstract
PURPOSE. The purpose of the current study was to evaluate the effect of incorporating nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) into a self-etching primer of a resin cement on the microtensile bond strength of dentin, regarding the proven antibacterial feature of NAg and remineralizing effect of NACP. MATERIALS AND METHODS. Flat, mid-coronal dentin from 20 intact extracted human third molars were prepared for cementation using Panavia F2.0 cement. The teeth were randomly divided into the four test groups (n=5) according to the experimental cement primer composition: cement primer without change (control group), primer with 1% (wt) of NACP, primer with 1% (wt) of physical mixture of NACP+Nag, and primer with 1% (wt) of chemical mixture of NACP+Nag. The resin cement was used according to the manufacturer’s instructions. After storage in distilled water at 37℃ for 24 h, the bonded samples were sectioned longitudinally to produce 1.0 × 1.0 mm beams for micro-tensile bond strength testing in a universal testing machine. Failure modes at the dentin-resin interface were observed using a stereomicroscope. The data were analyzed by one-way ANOVA and Tukey’s post-hoc tests and the level of significance was set at 0.05. RESULTS. The lowest mean microtensile bond strength was obtained for the NACP group. Tukey’s test showed that the bond strength of the control group was significantly higher than those of the other experimental groups, except for group 4 (chemical mixture of NACP and NAg; P=.67). CONCLUSION. Novel chemical incorporation of NAg-NACP into the self-etching primer of resin cement does not compromise the dentin bond strength.
참고문헌 (45)
- De Backer H, "A 20-year retrospective survival study of fixed partial dentures", Int J Prosthodont, 19, pp.143~153 (2006)
- Goodacre CJ, "Clinical complications in fixed prosthodontics", J Prosthet Dent, 90, pp.31~41 (2003)[DOI]
- Jokstad A, "Quality of dental restorations. FDI Commission Project 2-95", Int Dent J, 51, pp.117~158 (2001)[DOI]
- Libby G, "Longevity of fixed partial dentures", J Prosthet Dent, 78, pp.127~131 (1997)[DOI]
- Valderhaug J, "Assessment of the periapical and clinical status of crowned teeth over 25 years", J Dent, 25, pp.97~105 (1997)[DOI]
- Walton JN, "A survey of crown and fixed partial denture failures: length of service and reasons for replacement", J Prosthet Dent, 56, pp.416~421 (1986)[DOI]
- Haddad MF, "Cementation of prosthetic restorations: from conventional cementation to dental bonding concept", J Craniofac Surg, 22, pp.952~958 (2011)[DOI]
- Ferrari M, "Cement thickness and microleakage under Dicor crowns: an in vivo investigation", Int J Prosthodont, 4, pp.126~131 (1991)
- Albert FE, "Marginal adaptation and microle- akage of Procera AllCeram crowns with four cements", Int J Prosthodont, 17, pp.529~535 (2004)
- Diaz-Arnold AM, "Current status of luting agents for fixed prosthodontics", J Prosthet Dent, 81, pp.135~141 (1999)[DOI]
- Shafiei F, "Effect of resin coating and chlorhexidine on the microleakage of two resin cements after storage", J Prosthodont, 20, pp.106~112 (2011)[DOI]
- Burgers R, "The anti-adherence activity and bac- tericidal effect of microparticulate silver additives in compos- ite resin materials", Arch Oral Biol, 54, pp.595~601 (2009)[DOI]
- Cheng L, "Tetracalcium phosphate composite containing quaternary ammonium dimethacrylate with anti- bacterial properties", J Biomed Mater Res B Appl Biomater, 100, pp.726~734 (2012)
- Zhang K, "Effect of quaternary ammonium and silver nanoparticle-containing adhesives on dentin bond strength and dental plaque microcosm biofilms", Dent Mater, 28, pp.842~852 (2012)[DOI]
- Moreau JL, "Mechanical and acid neutralizing properties and bacteria inhibition of amorphous calcium phosphate dental nanocomposite", J Biomed Mater Res B Appl Biomater, 98, pp.80~88 (2011)
- Beyth S, "Antibacterial activity of bone cement containing quaternary ammonium polyethyleneimine nanoparticles", J Antimicrob Chemother, 69, pp.854~855 (2014)[DOI]
- Yoshida K, "Characterization and inhibitory effect of antibacterial dental resin composites incor- porating silver-supported materials", J Biomed Mater Res, 47, pp.516~522 (1999)[DOI]
- Hernandez-Sierra JF, "The antimicrobial sensitivity of Streptococcus mutans to nanoparticles of silver, zinc oxide, and gold", Nanomedicine, 4, pp.237~240 (2008)[DOI]
- Cheng L, "Antibacterial nanocomposite with calcium phosphate and quaternary ammonium", J Dent Res, 91, pp.460~466 (2012)[DOI]
- Melo MA, "Novel calcium phosphate nanocomposite with caries-inhibition in a human in situ model", Dent Mater, 29, pp.231~240 (2013)[DOI]
- Moreau JL, "Long-term mechanical durability of dental nanocomposites containing amorphous calcium phosphate nanoparticles", J Biomed Mater Res B Appl Biomater, 100, pp.1264~1273 (2012)
- Xu HH, "Nanocomposite containing amorphous calcium phosphate nanoparticles for caries inhibition", Dent Mater, 27, pp.762~769 (2011)[DOI]
- Zhao J, "Amorphous calcium phosphate and its application in dentistry", Chem Cent J, 5, pp.40~ (2011)[DOI]
- Dickens SH, "Mechanical properties and biochemical activity of remineralizing resin-based <TEX>$Ca-PO_{4}$<", TEX> cements, 2003, pp.19, 558~566
- Langhorst SE, "In vitro remineralization of enamel by polymeric amorphous calcium phosphate composite: quantitative microradiographic study", Dent Mater, 25, pp.884~891 (2009)[DOI]
- Chen L, "BisGMA", TEGDMA dental composite containing high aspect-ratio hydroxyapatite nanofibers, 2011, pp.27, 1187~1195
- Ciobanu CS, "Antibacterial activity of silver-doped hydroxyapatite nanoparticles against gram-positive and gram-negative bacteria", Nanoscale Res Lett, 7, pp.324~ (2012)[DOI]
- O’Donnell JN, "Adhesion of amorphous calcium phosphate composites bonded to dentin: a study in failure modality", J Biomed Mater Res B Appl Biomater, 90, pp.238~249 (2009)
- Mazzaoui SA, "Incorporation of casein phosphopeptide-amorphous calcium phosphate into a glass-ionomer cement", J Dent Res, 82, pp.914~918 (2003)[DOI]
- Deligeorgi V, "An overview of reasons for the placement and replacement of restorations", Prim Dent Care, 8, pp.5~11 (2001)[DOI]
- Imazato S, "Antibacterial activity and bonding characteristics of an adhesive resin containing antibacterial monomer MDPB", Dent Mater, 19, pp.313~319 (2003)[DOI]
- Li F, "Effects of a dental adhesive incorporating antibacterial monomer on the growth, adherence and membrane integrity of Streptococcus mutans", J Dent, 37, pp.289~296 (2009)[DOI]
- Duarte SJ, "SEM analysis of internal adaptation of adhesive restorations after contamination with saliva", J Adhes Dent, 7, pp.51~56 (2005)
- Loguercio AD, "Influence of adhesive systems on interfacial dentin gap formation in vitro", Oper Dent, 31, pp.431~441 (2006)[DOI]
- Peliz MI, "Scanning electron microscope analysis of internal adaptation of materials used for pulp protection under composite resin restorations", J Esthet Restor Dent, 17, pp.118~128 (2005)[DOI]
- Perdigao J, "The interaction of adhesive systems with human dentin", Am J Dent, 9, pp.167~173 (1996)
- Walshaw PR, "SEM evaluation of the resin-dentin interface with proprietary bonding agents in human sub- jects", J Dent Res, 73, pp.1079~1087 (1994)[DOI]
- Ahn SJ, "Experimental antimicrobial orthodontic adhesives using nanofillers and silver nanoparticles", Dent Mater, 25, pp.206~213 (2009)[DOI]
- Chen C, "Antibacterial activity and ion release of bonding agent containing amorphous calcium phosphate nanoparticles", Dent Mater, 30, pp.891~901 (2014)[DOI]
- Cheng L, "Antibacterial amorphous calcium phosphate nanocomposites with a quaternary ammonium dimethacrylate and silver nanoparticles", Dent Mater, 28, pp.561~572 (2012)[DOI]
- Melo MA, "Novel dental adhesives containing nanoparticles of silver and amorphous calcium phosphate", Dent Mater, 29, pp.199~210 (2013)[DOI]
- Uysal T, "Amorphous calcium phosphate-containing orthodontic cement for band fixation: an in vitro study", World J Orthod, 11, pp.129~134 (2010)
- Al Zraikat H, "The incorporation of casein phosphopeptide-amorphous calcium phosphate into a glass ionomer cement", Dent Mater, 27, pp.235~243 (2011)[DOI]
- Welch K, "Dental adhesives with bioactive and on-demand bactericidal properties", Dent Mater, 26, pp.491~499 (2010)[DOI]
- Cheng L, "Anti-biofilm dentin primer with quaternary ammonium and silver nanoparticles", J Dent Res, 91, pp.598~604 (2012)[DOI]
