In vitro evaluation of color and translucency reproduction of maxillofacial prostheses using a computerized system
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. Accurate color matching of maxillofacial prostheses to skin is important for esthetics. A computerized color matching system specific to human skin has recently been developed. The purpose of this study was to evaluate the accuracy in color and translucency matching of the computerized color matching system across different skin colors. MATERIALS AND METHODS. The silicone was colored to simulate 28 different skin colors (n=5) to serve as “target skin colors”. Using a spectrocolorometer (e-skin), color codes were determined for “replicate skin color” fabrication. CIELAB Delta-E between target skin color-replicate skin color pairs and translucency parameter were calculated. CIELAB Delta-E values were compared with one-way ANOVA and Tukey multiple-comparison. The agreement between L*, a*, b* and translucency parameter of target skin colors and replicate skin color were calculated by a two-way mixed average measures intraclass correlation coefficient. Translucency parameter of target skin color- replicate skin color pairs were compared with Paired t-test (α=.05). RESULTS. The mean CIELAB Delta-E value was 3.83 and significant differences were found among colors. The intraclass correlation coefficient showed excellent reliability for L*, a*, b* and good reliability for translucency parameter (P<.001). The mean translucency parameter of replicate skin colors was significantly higher than that of translucency parameter. CONCLUSION. The computerized color matching system specific to human skin was found to be reliable in terms of color and translucency between target skin colors and replicate skin color.
Abstract
PURPOSE. Accurate color matching of maxillofacial prostheses to skin is important for esthetics. A computerized color matching system specific to human skin has recently been developed. The purpose of this study was to evaluate the accuracy in color and translucency matching of the computerized color matching system across different skin colors. MATERIALS AND METHODS. The silicone was colored to simulate 28 different skin colors (n=5) to serve as “target skin colors”. Using a spectrocolorometer (e-skin), color codes were determined for “replicate skin color” fabrication. CIELAB Delta-E between target skin color-replicate skin color pairs and translucency parameter were calculated. CIELAB Delta-E values were compared with one-way ANOVA and Tukey multiple-comparison. The agreement between L*, a*, b* and translucency parameter of target skin colors and replicate skin color were calculated by a two-way mixed average measures intraclass correlation coefficient. Translucency parameter of target skin color- replicate skin color pairs were compared with Paired t-test (α=.05). RESULTS. The mean CIELAB Delta-E value was 3.83 and significant differences were found among colors. The intraclass correlation coefficient showed excellent reliability for L*, a*, b* and good reliability for translucency parameter (P<.001). The mean translucency parameter of replicate skin colors was significantly higher than that of translucency parameter. CONCLUSION. The computerized color matching system specific to human skin was found to be reliable in terms of color and translucency between target skin colors and replicate skin color.
참고문헌 (26)
- Hickey AJ, "Prosthodontic and psychological factors in treating patients with congenital and craniofacial defects", J Prosthet Dent, 95, pp.392~396 (2006)
- Nemli SK, "Quality of life of patients with implant-retained maxillofacial prostheses:a prospective and retrospective study", J Prosthet Dent, 109, pp.44~52 (2013)
- Andres CJ, "Clinical maxillofacial prosthetics", pp.233~244 (2000), Quintessence Publishing Co, Inc
- Hu X, "Translucency estimation for thick pigmented maxillofacial elastomer", J Dent, 39, pp.e2~e8 (2011)
- Hungerford E, "Coverage error of commercial skin pigments as compared to human facial skin tones", J Dent, 41, pp.986~991 (2013)
- Johnston WM, "Translucency parameter of colorants for maxillofacial prostheses", Int J Prosthodont, 8, pp.79~86 (1995)
- Coward TJ, "Computerized color formulation for African-Canadian people requiring facial prostheses: a pilot study", J Prosthodont, 17, pp.327~335 (2008)
- Seelaus R, "Coloration of silicone prostheses:technology versus clinical perception. Is there a difference? Part 2, clinical evaluation of a pilot study", J Prosthodont, 20, pp.67~73 (2011)
- Xiao K, "Color reproduction for advanced manufacture of soft tissue prostheses", J Dent, 41, pp.e15~e23 (2013)
- Korfage A, "Analysis of translucency of skin by volume reflection for color formulation of facial prostheses", Int J Prosthodont, 22, pp.623~629 (2009)
- Nuseir A, "Improved construction of auricular prosthesis by digital technologies", J Craniofac Surg, 26, pp.e502~e505 (2015)
- Kiat-amnuay S, "Color stability of dry earth pigmented maxillofacial silicone A-2186subjected to microwave energy exposure", J Prosthodont, 14, pp.91~96 (2005)
- CIE Technical Report. Colorimetry, , CIE Central Bureau, ~, pp.Publication 15 (2004)
- Cicchetti DV, "Guidelines, criteria, and rules of thumb for evaluating normed and standardized assessment instruments in psychology", Psychol Assess, 6, pp.284~290 (1994)
- Paravina RD, "Color difference thresholds of maxillofacial skin replications", J Prosthodont, 18, pp.618~625 (2009)
- Leow ME, "Assessment of colour differences in silicone hand and digit prostheses:perceptible and acceptable thresholds for fair and dark skin shades", Prosthet Orthot Int, 30, pp.5~16 (2006)
- Wee AG, "Use of a porcelain color discrimination test to evaluate color difference formulas", J Prosthet Dent, 98, pp.101~109 (2007)
- Douglas RD, "Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch", J Prosthet Dent, 97, pp.200~208 (2007)
- Ragain JC Jr, "Minimum color differences for discriminating mismatch between composite and tooth color", J Esthet Restor Dent, 13, pp.41~48 (2001)
- Ruyter IE, "Color stability of dental composite resin materials for crown and bridge veneers", Dent Mater, 3, pp.246~251 (1987)
- Douglas RD, "Acceptability of shade differences in metal ceramic crowns", J Prosthet Dent, 79, pp.254~260 (1998)
- Melgosa M, "Sensitivity differences in chroma, hue, and lightness from several classical threshold datasets", Color Res Appl, 20, pp.220~225 (1995)
- Dawson JB, "A theoretical and experimental study of light absorption and scattering by in vivo skin", Phys Med Biol, 25, pp.695~709 (1980)
- Ishikawa-Nagai S, "Reproducibility of tooth color gradation using a computer color-matching technique applied to ceramic restorations", J Prosthet Dent, 93, pp.129~137 (2005)
- Xiao K, "Developing a 3D colour image reproduction system for additive manufacturing of facial prostheses", Int J Adv Manuf Technol, 70, pp.2043~2049 (2014)
- Hatamleh MM, "Porosity and color of maxillofacial silicone elastomer", J Prosthodont, 20, pp.60~66 (2011)