Correlation between microhardness and wear resistance of dental alloys against monolithic zirconia
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose. The aim of this study is to compare the hardness according to the conditions of metal alloys. Moreover, the correlation between the cast crown hardness before and after wear testing and the degree of wear for each dental alloy was assessed. Materials and Methods. Cast crowns of three metal alloys (Co-Cr, gold, and Ni-Cr alloys) opposing smooth-surface monolithic zirconia were used. The Vickers microhardness of the ingot (which did not undergo wear testing) and the cast crown before and after wear testing were measured for each alloy. Two-way ANOVA and Scheffé tests were used to compare the measured hardness values. Moreover, the Pearson correlation coefficient was used to evaluate the relationship between the surface hardness and the wear of the cast crown (α=.05). Results. There was no significant difference in the hardness before and after wear testing for the gold alloy (P >.05); however, the hardness of the worn surface of the cast crown increased compared to that of the cast crown before the wear tests of Ni-Cr and Co-Cr alloys (P <.05). Furthermore, there was no correlation between the wear and hardness of the cast crown before and after wear testing for all three metal alloys (P >.05). Conclusion. There was a significant difference in hardness between dental alloys under the same conditions. No correlation existed between the surface hardness of the cast crown before and after wear testing and the wear of the cast crown.
Abstract
Purpose. The aim of this study is to compare the hardness according to the conditions of metal alloys. Moreover, the correlation between the cast crown hardness before and after wear testing and the degree of wear for each dental alloy was assessed. Materials and Methods. Cast crowns of three metal alloys (Co-Cr, gold, and Ni-Cr alloys) opposing smooth-surface monolithic zirconia were used. The Vickers microhardness of the ingot (which did not undergo wear testing) and the cast crown before and after wear testing were measured for each alloy. Two-way ANOVA and Scheffé tests were used to compare the measured hardness values. Moreover, the Pearson correlation coefficient was used to evaluate the relationship between the surface hardness and the wear of the cast crown (α=.05). Results. There was no significant difference in the hardness before and after wear testing for the gold alloy (P >.05); however, the hardness of the worn surface of the cast crown increased compared to that of the cast crown before the wear tests of Ni-Cr and Co-Cr alloys (P <.05). Furthermore, there was no correlation between the wear and hardness of the cast crown before and after wear testing for all three metal alloys (P >.05). Conclusion. There was a significant difference in hardness between dental alloys under the same conditions. No correlation existed between the surface hardness of the cast crown before and after wear testing and the wear of the cast crown.
참고문헌 (30)
- Premwara Triwatana, "Clinical performance and failures of zirconia-based fixed partial dentures: a review literature", The Journal of Advanced of Prosthodontics, 4(2), pp.76~83 (2012), 대한치과보철학회[DOI]
- Amer R, "Three-body wear potential of dental yttrium-stabilized zirconia ceramic after grinding, polishing, and glazing treatments", J Prosthet Dent, 112, pp.1151~1155 (2014)
- Wataha JC, "Alloys for prosthodontic restorations", J Prosthet Dent, 87, pp.351~363 (2002)
- Vermilyea SG, "Metallurgical structure and microhardness of four new palladium-based alloys", J Prosthodont, 5, pp.288~294 (1996)
- Nogués L, "Dental casting alloys behaviour during power toothbrushing with toothpastes with various abrasivities. Part I: wear behavior", J Mater Sci Mater Med, 19, pp.3041~3048 (2008)
- Wassell RW, "Crowns and extra-coronal restorations : materials selection", Br Dent J, 199-202, pp.205~211 (2002)
- Øilo M, "Mechanical properties of cobalt-chromium 3-unit fixed dental prostheses fabricated by casting, milling, and additive manufacturing", J Prosthet Dent, 120, pp.156~ (2018)
- Bezzon OL, "Pilot study of the relationship between the hardness and abrasion resistance of two base metal alloys used for metal-ceramic restorations", J Prosthet Dent, 85, pp.190~194 (2001)
- Jacobi R, "A comparison of the abrasiveness of six ceramic surfaces and gold", J Prosthet Dent, 66, pp.303~309 (1991)
- Bömicke W, "Short-term prospective clinical evaluation of monolithic and partially veneered zirconia single crowns", J Esthet Restor Dent, 29, pp.22~30 (2017)
- Turner KA, "Restoration of the extremely worn dentition", J Prosthet Dent, 52, pp.467~474 (1984)
- Heintze SD, "Wear of ceramic and antagonist-a systematic evaluation of influencing factors in vitro", Dent Mater, 24, pp.433~449 (2008)
- Hmaidouch R, "Tooth wear against ceramic crowns in posterior region : a systematic literature review", Int J Oral Sci, 5, pp.183~190 (2013)
- Guess PC, "All-ceramic systems : laboratory and clinical performance", Dent Clin North Am, 55, pp.333~352, ix (2011)
- Albashaireh ZS, "Two-body wear of different ceramic materials opposed to zirconia ceramic", J Prosthet Dent, 104, pp.105~113 (2010)
- Saiki O, "Influence of ceramic surface texture on the wear of gold alloy and heat-pressed ceramics", Dent Mater J, 33, pp.865~873 (2014)
- Kanbara T, "Wear behavior between zirconia and titanium as an antagonist on fixed dental prostheses", Biomed Mater, 9, pp.025005~ (2014)
- Burgess JO, "Enamel wear opposing polished and aged zirconia", Oper Dent, 39, pp.189~194 (2014)
- 정유석, "A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain", The Journal of Advanced of Prosthodontics, 2(3), pp.111~115 (2010), 대한치과보철학회[DOI]
- Preis V, "Wear performance of dental ceramics after grinding and polishing treatments", J Mech Behav Biomed Mater, 10, pp.13~22 (2012)
- Luangruangrong P, "Influence of full-contour zirconia surface roughness on wear of glass-ceramics", J Prosthodont, 23, pp.198~205 (2014)
- 차민상, "Metal stain on monolithic zirconia restoration: A case report", The Journal of Advanced of Prosthodontics, 9(2), pp.138~142 (2017), 대한치과보철학회[DOI]
- Cha MS, "A comparative study of the wear of dental alloys against monolithic zirconia", J Prosthet Dent, 123, pp.866~873 (2020)
- Chan KS, "Modeling wear of cast Ti alloys", Acta Biomater, 3, pp.383~389 (2007)
- Faria AC, "Wear resistance of experimental titanium alloys for dental applications", J Mech Behav Biomed Mater, 4, pp.1873~1879 (2011)
- "ASTM E384-17. Standard test method for microindentation hardness of materials"[URL]
- Chen WC, "Characterization of Ni-Cr alloys using different casting techniques and molds", Mater Sci Eng C Mater Biol Appl, 35, pp.231~238 (2014)
- Hsu HC, "Evaluation of different bonded investments for dental titanium casting", J Mater Sci Mater Med, 18, pp.605~609 (2007)
- Tamirisakandala S, "Grain refinement of cast titanium alloys via trace bohttpsron addition", Scripta Mater, 53, pp.1421~1426 (2005)
- Stöckl C, "Macro-and microtopographical examination and quantification of CAD-CAM composite resin 2-and 3-body wear", J Prosthet Dent, 120, pp.537~545 (2018)