가상착의 시스템을 통한 니트 플레어스커트의 드레이프 형상에 관한 연구 - 각도에 따른 플레어스커트를 중심으로 -
A Study on Knit Flare Skirts of Hem for 3D Virtual Clothing System - Focused on the Angle of Flare Skirt -
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: 90° and 180°), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of 180° than 90°. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of 90° with the number of nodes and silhouette angle increasing in the wale direction at the angle of 180°.
Abstract
This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: 90° and 180°), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of 180° than 90°. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of 90° with the number of nodes and silhouette angle increasing in the wale direction at the angle of 180°.
참고문헌 (15)
- 구미란, "재단 각도에 따른 세미 플레어 스커트의 외관 및 헴라인 드레이프 형상에 관한 연구- 실제 착의와 i-Designer의 가상 착의 시스템을 중심으로 -", 복식문화연구, 17(3), pp.499~511 (2009), 복식문화학회
- 기희숙, "3차원 형상계측에 의한 니트 플레어스커트의 입체형상에 관한 연구", 한국의상디자인학회지, 13(2), pp.103~119 (2011), 한국의상디자인학회
- 김현아, "플레어 스커트의 실제착의와 가상착의 이미지 비교", 감성과학, 14(3), pp.385~394 (2011), 한국감성과학회
- 박근혜, "플레어스커트의 실제착의와 가상착의에 따른 시각적 이미지 연구 : 20대 비만체형 여성을 중심으로", 석사, 의류학, pp.2007
- 박창규, "i-Fashion의 개념과 실행", 한국의류산업학회지, 10(3), pp.277~280 (2008), 한국의류산업학회
- 박혜숙, "피복구성학 이론편" (1998), 교학연구사
- 서정권, "화상분석에 의한 의복의 입체형상에 관한 연구", 한양여자대학교 논문집, 32, pp.163~175 (2009)
- 어미경, "3차원 가상착의 시스템을 활용한 원피스드레스의 디자인 변화에 따른 이미지 차이", 한국의상디자인학회지, 14(2), pp.101~111 (2012), 한국의상디자인학회
- 이명희, "플레어스커트의 가상착용 형상에 관한 연구-나르시스의 가상착용시스템을 중심으로-", 한국의상디자인학회지, 8(2), pp.195~203 (2006), 한국의상디자인학회
- 이선경, "3D 의상 CAD를 이용한 가상 의복과 실물 의복의 실루엣 비교 연구", 석사, 의류학, pp.2009
- 이소영, "3차원 가상스커트와 실물제작 스커트의 형상 비교연구", 복식, 59(8), pp.26~36 (2009), 한국복식학회
- 이윤주, "3D 가상패션소재의 드레이프성 연구 - 3D 의상 CAD 시스템 활용 -", 패션 비즈니스, 15(5), pp.103~114 (2011), 한국패션비즈니스학회
- 주소령, "3차원 인체형상 측정 기술의 현황", 시책논단, 8~16 (2003)
- 최경미, "니트소재의 인장변형 특성과 3D 디지털 클로딩 시스템에 의한 외관표현에 관한 연구", 패션 비즈니스, 16(2), pp.151~162 (2012), 한국패션비즈니스학회[DOI]
- 須田博子, "フレア-スカトのド レプ性に關する硏究", 日本女子大學紀要, 33, pp.81~89 (1986)