PROBABILISTIC ANALYSIS OF A SYSTEM CONSISTING OF TWO SUBSYSTEMS IN THE SERIES CONFIGURATION UNDER COPULA REPAIR APPROACH
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Redundancy is commonly employed to improve system reliability. In most situations, components in the standby configurations are assumed statistically similar but independent. In many realistic models, all parts in standby are not treated as identical as they have different failure possibilities. The operational structure of the system has subsystem-1 with five identical components working un- der 2-out-of-5: G; policy, and the subsystem-2 has two units and functioning under 1-out-of-2: G; policy. Failure rates of units of subsystems are constant and assumed to follow an exponential distribution. Computed results give a new aspect to the scientific community to adopt multi-dimension repair in the form of the copula.
Abstract
Redundancy is commonly employed to improve system reliability. In most situations, components in the standby configurations are assumed statistically similar but independent. In many realistic models, all parts in standby are not treated as identical as they have different failure possibilities. The operational structure of the system has subsystem-1 with five identical components working un- der 2-out-of-5: G; policy, and the subsystem-2 has two units and functioning under 1-out-of-2: G; policy. Failure rates of units of subsystems are constant and assumed to follow an exponential distribution. Computed results give a new aspect to the scientific community to adopt multi-dimension repair in the form of the copula.
참고문헌 (28)
- D.R. Cox, "The analysis of non-Markov stochastic processes by the inclusion of supple-mentary variables", Proceedings of the Cambridge Philosophical Society. Mathematical and Physical Sciences, 51(3), pp.433~441 (1955)
- E.A. Oliveira, "Unavailability analysis of safety systems under aging by supplementary variables with imperfect repair", Annals of Nuclear Energy, 32(2), pp.241~252 (2005)
- M.S. Moustafa, "Availability of k-out-of-n: G systems with M failure modes", Microelec-tron Reliability, 36, pp.385~388 (1996)
- P.A. Kullstam, "Availability, MTBF, MTTR for the repairable m-out-of-n system", IEEE Transaction Reliability, R-30, pp.393~394 (1981)
- X. Liang, "Exact reliability formula for consecutive k-out-of-n re-pairable systems", IEEE Transactions on Reliability, 59(2), pp.313~318 (2010)
- M. Park, "A generalized block replacement policy for a k-out-of-n system with respect to a threshold number of failed components and risk costs", IEEE Trans. System Man, Cybernet. A Syst. Humans, 42(2), pp.453~463 (2012)
- P. Kumar, "Reliability analysis of a single unit M|G|1 system model with helping unit", Journal of Combinatorics, Information and System Sciences, 32(1-4), pp.209~219 (2007)
- E.J. Vanderperre, "Reliability analysis of a warm standby system with general distribu-tions", Microelectron Reliab, 30(3), pp.487~490 (1990)
- G.S. Mokaddis, "Stochastic analysis of a two-dissimilar unit warm standby redundant system with two types of repair facilities", Microelectron Reliab, 35(12), pp.1467~1472 (1995)
- P. Kumar, "Stochastic analysis of a two-priority unit standby system with imperfect switch and correlated failure and repair times", Int. Journal of Adv Research in computer science and software engineering, 4(8), pp.621~628 (2014)
- B.S. Dhillon, "Reliability and availability analysis of a system with warm standby and common cause failures", Microelectron Reliab, 33(9), pp.1343~1349 (1993)
- R.B. Nelson, "An Introduction to Copulas" (2006), Springer
- A. Munjal, "Reliability analysis of a complex repairable system com-posed of two 2-out-of-3: G subsystems connected in parallel", Journal of reliability and statistical studies, 7, pp.89~111 (2014)
- N. Goyal, "Sensitivity analysis of a three-unit series system under k-out-of-n redundancy", International Journal of Quality Reliability and Management, 34(6), pp.770~784 (2017)
- V.V. Singh, "Performance analysis of the complex system in the series configuration under different failure and repair disciplines using a copula", International Journal of reliability quality and safety engineering, 23, pp.1~21 (2016)
- V.V. Singh, "Cost Analysis of an Engineering System involving subsystems in Series Configuration", IEEE Transactions on Automation Science and Engineering, 10, pp.1124~1130 (2013)
- A.K. Lado, "Performance and cost assessment of the repairable complex system with two subsystems connected in a series configuration", International Journal of Reliability and Applications, 19(1), pp.27~42 (2018)
- A. Kumar, "Availability and cost analysis of an engineering system involving subsystems in series configuration", International Journal of Quality and Reliability Management, 34(6), pp.879~894 (2017)
- R. Sharma, "Availability improvement for the successive k-out-of-n ma-chining system-using standby with multiple working vacations", International Journal of Reliability and Safety, 11(3, pp.4) (2017), 256~267
- M.A. El-Damcese, "Availability and Reliability Analysis for the k-out-of-n: G system with three failures using Markov model", International Journal of Scientific and Engineering Research, 5(12), pp.383~389 (2014)
- M. Ram, "Availability and Cost Analysis of a parallel redundant com-plex system with two types of failure under preemptive-resume repair discipline using Gumbel-Hougaard family copula in repair", Int. J. Reliabil., Quality Safety Engineering, 15(4), pp.341~365 (2008)
- V.V. Singh, "Availability, MTTF and cost analysis of a system having two units in a series configuration with a controller", International Journal of System Assurance and Management, 4(4), pp.341~352 (2013)
- X. Bao, "An analysis of availability for series Markov repairable system with neglected or delayed failures", IEEE Trans. Rel., 59(4), pp.734~743 (2010)
- Z. Zheng, "A study on a single-unit Markov repairable system with repair time omission", IEEE Transaction on Reliability, 55(2), pp.182~188 (2006)
- A. Kumar, "Reliability measures improvement and sensitivity analysis of a coal-handling unit for thermal power plant", IJE Transactions C: Aspects, 26(9), pp.1059~1066 (2013)
- N. Goyal, "Sensitivity assessment of air and refrigeration", Kuwait Journal of Science, 45(1), pp.29~38 (2018)
- M. El-Damcese, "Reliability analysis of three elements in series and parallel systems under time-varying Fuzzy failure rate", IJE Transactions A:Basics, 27(4), pp.553~560 (2014)
- M.A El- Damcese, "Reliability and Sensitivity analysis of the k-out-of- n: G warm standby parallel repairable system with replacement at common cause failure using Markov model", Journal. Stat. and Appl. Probability, 5(3), pp.521~533 (2016)
