알루미늄 6061 합금의 표면 나노 구조물 변화에 따른 방빙 특성 연구
Anti-Icing Characteristics of Aluminum 6061 Alloys According to Surface Nanostructure
3
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Recently, aluminum 6061 instead of copper alloy is used for cooling heat exchangers used in the internal combustion of engines due to its economic feasibility, lightweight, and excellent thermal conductivity. In this study, aluminum 6061 alloy was anodized with oxalic acid, phosphoric acid, or chromic acid as an anodizing electrolyte at the same concentration of 0.3 M. After the third anodization, FDTS, a material with low surface energy, was coated to compare hydrophobic properties and anti-icing characteristics. Aluminum was converted into an anodization film after anodization on the surface, which was confirmed through Energy Dispersive X-ray Spectroscopy (EDS). Pore distance, interpore distance, anodization film thickness, and solid fraction were measured with a Field Emission Scanning Electron Microscope (FESEM). For anti-icing, hydrophobic surfaces were anodized with oxalic acid, phosphoric acid, or chromic acid solution. The sample anodized in oxalic acid had the lowest solid fraction. It had the highest contact angle for water droplets and the lowest contact hysteresis angle. The anti-icing contact angle showed a tendency to decrease for specimens in all solutions.
Abstract
Recently, aluminum 6061 instead of copper alloy is used for cooling heat exchangers used in the internal combustion of engines due to its economic feasibility, lightweight, and excellent thermal conductivity. In this study, aluminum 6061 alloy was anodized with oxalic acid, phosphoric acid, or chromic acid as an anodizing electrolyte at the same concentration of 0.3 M. After the third anodization, FDTS, a material with low surface energy, was coated to compare hydrophobic properties and anti-icing characteristics. Aluminum was converted into an anodization film after anodization on the surface, which was confirmed through Energy Dispersive X-ray Spectroscopy (EDS). Pore distance, interpore distance, anodization film thickness, and solid fraction were measured with a Field Emission Scanning Electron Microscope (FESEM). For anti-icing, hydrophobic surfaces were anodized with oxalic acid, phosphoric acid, or chromic acid solution. The sample anodized in oxalic acid had the lowest solid fraction. It had the highest contact angle for water droplets and the lowest contact hysteresis angle. The anti-icing contact angle showed a tendency to decrease for specimens in all solutions.
참고문헌 (44)
- Madhavi Y., "Influence of surface-roughness on the corrosion-fatigue behavior of MAO coated 6061-T6 Al alloy assessed in NaCl medium", Surface and Coatings Technology, 414, pp.127102~ (2021), Elsevier BV[DOI]
- Lkhagvaa Telmenbayar, "Corrosion resistance of the anodization", glycidoxypropyltrimethoxysilane composite coating on 6061 aluminum alloy, 2020, pp.403, 126433~[DOI]
- L. Rama Krishna, "Influence of prior shot peening variables on the fatigue life of micro arc oxidation coated 6061-T6 Al alloy", International Journal of Fatigue, 106, pp.165~174 (2018), Elsevier BV[DOI]
- Jie Zang, "Fabrication of superhydrophobic surface on aluminum alloy 6061 by a facile and effective anodic oxidation method", Surface and Coatings Technology, 380, pp.125078~ (2019), Elsevier BV[DOI]
- Sin-Pui Fu, "Dynamic Study of Liquid Drop Impact on Supercooled Cerium Dioxide: Anti-Icing Behavior", Langmuir, 32(24), pp.6148~6162 (2016), American Chemical Society (ACS)[DOI]
- Mohammad Irfan Bakshi, "Hydrophobic, Mechanically Robust Polysorbate-Enveloped Cerium Oxide-Dispersed Oleo-Polyetheramide Nanocomposite Coatings for Anticorrosive and Anti-Icing Applications", Industrial & Engineering Chemistry Research, 59(14), pp.6617~6628 (2020), American Chemical Society (ACS)[DOI]
- Youfa Zhang, "Facile fabrication of superhydrophobic nanostructures on aluminum foils with controlled-condensation and delayed-icing effects", Applied Surface Science, 258(20), pp.8253~8257 (2012), Elsevier BV[DOI]
- Junqi Dong, "Air-side thermal hydraulic performance of offset strip fin aluminum heat exchangers", Applied Thermal Engineering, 27(2-3), pp.306~313 (2007), Elsevier BV[DOI]
- G. Y. Liu, "Robust and self-healing superhydrophobic aluminum surface with excellent anti-icing performance", Surfaces and Interfaces, 28, pp.101588~ (2022)[DOI]
- J. Fahim, "Cavitation erosion behavior of super-hydrophobic coatings on Al5083 marine aluminum alloy", Wear, 424-425, pp.122~132 (2019), Elsevier BV[DOI]
- Pedro Atz-Dick, "Aluminum anodizing with simultaneous silanization for increased hydrophobicity and corrosion protection", Applied Surface Science, 593, pp.153392~ (2022), Elsevier BV[DOI]
- Thierry Darmanin, "Superhydrophobic and superoleophobic properties in nature", Materials Today, 18(5), pp.273~285 (2015), Elsevier BV[DOI]
- D.Y. Kwok, "Contact angle measurement and contact angle interpretation", Advances in Colloid and Interface Science, 81(3), pp.167~249 (1999), Elsevier BV[DOI]
- J. F. Joanny, "A model for contact angle hysteresis", The Journal of Chemical Physics, 81(1), pp.552~562 (1984), AIP Publishing[DOI]
- Daiki Nakajima, "A Superhydrophilic Aluminum Surface with Fast Water Evaporation Based on Anodic Alumina Bundle Structures via Anodizing in Pyrophosphoric Acid", Materials, 12(21), pp.3497~ (2019), MDPI AG[DOI]
- Elliot Jenner, "Durability of hydrophobic coatings for superhydrophobic aluminum oxide", Applied Surface Science, 282, pp.73~76 (2013), Elsevier BV[DOI]
- Yanhua Wang, "Super-hydrophobic surface on pure magnesium substrate by wet chemical method", Applied Surface Science, 256(12), pp.3837~3840 (2010), Elsevier BV[DOI]
- Athanasios Milionis, "Recent advances in the mechanical durability of superhydrophobic materials", Advances in Colloid and Interface Science, 229, pp.57~79 (2016), Elsevier BV[DOI]
- Craig J. Donahue, "Anodizing and Coloring Aluminum Alloys", Journal of Chemical Education, 91(5), pp.711~715 (2014), American Chemical Society (ACS)[DOI]
- Chanyoung Jeong, "A Study on Functional Hydrophobic Stainless Steel 316L Using Single-Step Anodization and a Self-Assembled Monolayer Coating to Improve Corrosion Resistance", Coatings, 12(3), pp.395~ (2022), MDPI AG[DOI]
- M. SAEEDIKHANI, "Anodizing of 2024-T3 aluminum alloy in sulfuric-boric-phosphoric acids and its corrosion behavior", Transactions of Nonferrous Metals Society of China, 23(9), pp.2551~2559 (2013), Elsevier BV[DOI]
- Lidia Benea, "Electrochemically obtained Al2O3 nanoporous layers with increased anticorrosive properties of aluminum alloy", Journal of Materials Research and Technology, 17, pp.2636~2647 (2022), Elsevier BV[DOI]
- A. S. Darmawan, "Corrosion Resistance Improvement of Aluminum under Anodizing Process", AIP Conference Proceedings, 1977, pp.020006~ (2018)
- C. Jeong, , Ph. D, pp.2013
- C. Blawert, "Anodizing Treatments for Magnesium Alloys and Their Effect on Corrosion Resistance in Various Environments", Advanced Engineering Materials, 8(6), pp.511~533 (2006), Wiley[DOI]
- Chanyoung Jeong, "Air-Impregnated Nanoporous Anodic Aluminum Oxide Layers for Enhancing the Corrosion Resistance of Aluminum", Langmuir, 31(40), pp.11040~11050 (2015), American Chemical Society (ACS)[DOI]
- Yahya Alivov, "The anodization voltage influence on the properties of TiO2 nanotubes grown by electrochemical oxidation", Nanotechnology, 20(22), pp.225602~ (2009), IOP Publishing[DOI]
- Minjoong Kim, "Improvement of corrosion properties of plasma in an aluminum alloy 6061-T6 by phytic acid anodization temperature", Journal of Materials Research and Technology, 11, pp.219~226 (2021), Elsevier BV[DOI]
- W. Lee, "Fast fabrication of long-range ordered porous alumina membranes by hard anodization", Nature Materials, 5, pp.741~ (2006)
- Chanyoung Jeong, "Single-Step Direct Fabrication of Pillar-on-Pore Hybrid Nanostructures in Anodizing Aluminum for Superior Superhydrophobic Efficiency", Applied Materials & Interfaces, 4(2), pp.842~848 (2012), American Chemical Society (ACS)[DOI]
- Chanyoung Jeong, "Systematic Control of Anodic Aluminum Oxide Nanostructures for Enhancing the Superhydrophobicity of 5052 Aluminum Alloy", Materials, 12(19), pp.3231~ (2019), MDPI AG[DOI]
- Yanpeng Wu, "Analysis of anti-condensation mechanism on superhydrophobic anodic aluminum oxide surface", Applied Thermal Engineering, 58(1-2), pp.664~669 (2013), Elsevier BV[DOI]
- T. Young, "III. An essay on the cohesion of fluids", Philosophical transactions of the royal society of London, 95, pp.65~ (1805), The Royal Society[DOI]
- J Kijlstra, "Roughness and topology of ultra-hydrophobic surfaces", Colloids and Surfaces A: Physicochemical and Engineering Aspects, 206(1-3), pp.521~529 (2002), Elsevier BV[DOI]
- Robert N. Wenzel, "RESISTANCE OF SOLID SURFACES TO WETTING BY WATER", Industrial & Engineering Chemistry, 28(8), pp.988~994 (1936), American Chemical Society (ACS)[DOI]
- Esa Puukilainen, "Superhydrophobic Polyolefin Surfaces: Controlled Micro- and Nanostructures", Langmuir, 23(13), pp.7263~7268 (2007), American Chemical Society (ACS)[DOI]
- A. B. D. Cassie, "Wettability of porous surfaces", Transactions of the Faraday Society, 40, pp.546~ (1944), Royal Society of Chemistry (RSC)[DOI]
- Edward Bormashenko, "Why does the Cassie–Baxter equation apply?", Colloids and Surfaces A: Physicochemical and Engineering Aspects, 324(1-3), pp.47~50 (2008), Elsevier BV[DOI]
- Gene Whyman, "The rigorous derivation of Young, Cassie–Baxter and Wenzel equations and the analysis of the contact angle hysteresis phenomenon", Chemical Physics Letters, 450(4-6), pp.355~359 (2008), Elsevier BV[DOI]
- Wonjae Choi, "A modified Cassie–Baxter relationship to explain contact angle hysteresis and anisotropy on non-wetting textured surfaces", Journal of Colloid and Interface Science, 339(1), pp.208~216 (2009), Elsevier BV[DOI]
- Wancheng Gu, "Water‐Based Robust Transparent Superamphiphobic Coatings for Resistance to Condensation, Frosting, Icing, and Fouling", Advanced Materials Interfaces, 7(10), pp.1902201~ (2020), Wiley[DOI]
- Hu Luo, "Fabrication of slippery Zn surface with improved water-impellent, condensation and anti-icing properties", Applied Surface Science, 470, pp.1139~1147 (2019), Elsevier BV[DOI]
- S. Farhadi, "Anti-icing performance of superhydrophobic surfaces", Applied Surface Science, 257(14), pp.6264~6269 (2011), Elsevier BV[DOI]
- I.V. Roslyakov, "Annealing induced structural and phase transitions in anodic aluminum oxide prepared in oxalic acid electrolyte", Surface and Coatings Technology, 381, pp.125159~ (2020), Elsevier BV[DOI]