Investigation of Functional 6061 Aluminum Alloy Oxide Film with Anodization Voltage and its Corrosion Resistance
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study investigated the formation of oxide films on 6061 aluminum (Al) alloy and their impacts on corrosion resistance efficiency by regulating anodization voltage. Despite advantageous properties inherent to Al alloys, their susceptibility to corrosion remains a significant limitation. Thus, enhancing corrosion resistance through developing protective oxide films on alloy surfaces is paramount. The first anodization was performed for 6 h with an applied voltage of 30, 50, or 70 V on the 6061 Al alloy. The second anodization was performed for 0.5 h by applying 40 V after removing the existing oxide film. Resulting oxide film’s shape and roughness were analyzed using field emission–scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). Wettability and corrosion resistance were compared before and after a self-assembled monolayer (SAM) using an FDTS (1H, 1H, 2H, 2H-Perfluorodecyltrichlorosilane) solution. As the first anodization voltage increased, the final oxide film’s thickness and pore diameter also increased, resulting in higher surface roughness. Consequently, all samples exhibited superhydrophilic behavior before coating. However, contact angle after coating increased as the first anodization voltage increased. Notably, the sample anodized at 70 V with superhydrophobic characteristics after coating demonstrated the highest corrosion resistance performance.
Abstract
This study investigated the formation of oxide films on 6061 aluminum (Al) alloy and their impacts on corrosion resistance efficiency by regulating anodization voltage. Despite advantageous properties inherent to Al alloys, their susceptibility to corrosion remains a significant limitation. Thus, enhancing corrosion resistance through developing protective oxide films on alloy surfaces is paramount. The first anodization was performed for 6 h with an applied voltage of 30, 50, or 70 V on the 6061 Al alloy. The second anodization was performed for 0.5 h by applying 40 V after removing the existing oxide film. Resulting oxide film’s shape and roughness were analyzed using field emission–scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). Wettability and corrosion resistance were compared before and after a self-assembled monolayer (SAM) using an FDTS (1H, 1H, 2H, 2H-Perfluorodecyltrichlorosilane) solution. As the first anodization voltage increased, the final oxide film’s thickness and pore diameter also increased, resulting in higher surface roughness. Consequently, all samples exhibited superhydrophilic behavior before coating. However, contact angle after coating increased as the first anodization voltage increased. Notably, the sample anodized at 70 V with superhydrophobic characteristics after coating demonstrated the highest corrosion resistance performance.
참고문헌 (38)
- Chanyoung Jeong, "Air-Impregnated Nanoporous Anodic Aluminum Oxide Layers for Enhancing the Corrosion Resistance of Aluminum", Langmuir, 31(40), pp.11040~11050 (2015), American Chemical Society (ACS)[DOI]
- Merve İzmir, "Anodization of titanium alloys for orthopedic applications", Frontiers of Chemical Science and Engineering, 13(1), pp.28~45 (2018), Springer Science and Business Media LLC[DOI]
- Yahya Alivov, "The anodization voltage influence on the properties of TiO<sub>2<", sub>nanotubes grown by electrochemical oxidation, 2009, pp.20(22), 225602~[DOI]
- 박영주, "알루미늄 5052 및 6061 합금의 양극산화 표면처리를 통한 발수 특성 및 부식 특성 비교", CORROSION SCIENCE AND TECHNOLOGY, 21(3), pp.200~208 (2022), 한국부식방식학회[DOI]
- Chang Yao, "Anodization: A Promising Nano-Modification Technique of Titanium Implants for Orthopedic Applications", Journal of Nanoscience and Nanotechnology, 6(9), pp.2682~2692 (2006), American Scientific Publishers[DOI]
- Craig J. Donahue, "Anodizing and Coloring Aluminum Alloys", Journal of Chemical Education, 91(5), pp.711~715 (2014), American Chemical Society (ACS)[DOI]
- Chanyoung Jeong, "Control of the Nanopore Architecture of Anodic Alumina via Stepwise Anodization with Voltage Modulation and Pore Widening", Nanomaterials, 13(2), pp.342~ (2023), MDPI AG[DOI]
- S. Lin, "Corrosion Protection of Al", SiC Metal Matrix Composites by Anodizing, 1992, pp.48(1), 61~67[DOI]
- Fateme Nowruzi, "Effect of electrochemical oxidation and drug loading on the antibacterial properties and cell biocompatibility of titanium substrates", Scientific Reports, 12(1) (2022), Springer Science and Business Media LLC[DOI]
- Z B Xie, "The effects of anodization parameters on titania nanotube arrays and dye sensitized solar cells", Nanotechnology, 19(40), pp.405701~ (2008), IOP Publishing[DOI]
- Wojciech J. Stępniowski, "Synthesis of anodic aluminum oxide (AAO) at relatively high temperatures. Study of the influence of anodization conditions on the alumina structural features", Surface and Coatings Technology, 206(2-3), pp.265~272 (2011), Elsevier BV[DOI]
- Chanyoung Jeong, "Systematic Control of Anodic Aluminum Oxide Nanostructures for Enhancing the Superhydrophobicity of 5052 Aluminum Alloy", Materials, 12(19), pp.3231~ (2019), MDPI AG[DOI]
- Chien Chon Chen, "Enhanced Efficiency of Dye-Sensitized Solar Cells Using Anodic Titanium Oxide Nanotube Arrays", Journal of The Electrochemical Society, 156(9), pp.C304~ (2009), The Electrochemical Society[DOI]
- L. Bouchama, "Enhancing aluminum corrosion resistance by two-step anodizing process", Surface and Coatings Technology, 235, pp.676~684 (2013), Elsevier BV[DOI]
- Youngyoon Kim, "Enhancing the Surface Hydrophilicity of an Aluminum Alloy Using Two-Step Anodizing and the Effect on Inkjet Printing Characteristics", Coatings, 13(2), pp.232~ (2023), MDPI AG[DOI]
- Xin Wang, "Fabrication and characterization of anodic aluminum oxide template", Microelectronic Engineering, 66(1-4), pp.166~170 (2003), Elsevier BV[DOI]
- 윤덕빈, "탄소강 및 해드필드강의 파이프 조관에 따른 침식부식 거동에 대한 비교연구", CORROSION SCIENCE AND TECHNOLOGY, 21(3), pp.209~220 (2022), 한국부식방식학회[DOI]
- Chien-Chon Chen, "Fabrication and Characterization of Anodic Titanium Oxide Nanotube Arrays of Controlled Length for Highly Efficient Dye-Sensitized Solar Cells", The Journal of Physical Chemistry C, 112(48), pp.19151~19157 (2008), American Chemical Society (ACS)[DOI]
- 최예지, "Titanium 양극산화시 TiO2의 형상 및 특성에 미치는 전해질의 영향", CORROSION SCIENCE AND TECHNOLOGY, 22(3), pp.193~200 (2023), 한국부식방식학회[DOI]
- Tatsuya Kikuchi, "Fabrication of Self-Ordered Porous Alumina via Etidronic Acid Anodizing and Structural Color Generation from Submicrometer-Scale Dimple Array", Electrochimica Acta, 156, pp.235~243 (2015), Elsevier BV[DOI]
- Jianling Zhao, "Fabrication of titanium oxide nanotube arrays by anodic oxidation", Solid State Communications, 134(10), pp.705~710 (2005), Elsevier BV[DOI]
- Wojciech J. Stępniowski, "First step of anodization influences the final nanopore arrangement in anodized alumina", Surface and Coatings Technology, 206(6), pp.1416~1422 (2011), Elsevier BV[DOI]
- 지혜정, "알루미늄 5052 합금의 산화피막 성장 및 내식성 연구", 한국표면공학회지, 51(6), pp.372~380 (2018), 한국표면공학회[DOI]
- Jingui Li, "Effect of anodizing temperature and organic acid addition on the structure and corrosion resistance of anodic aluminum oxide films", Thin Solid Films, 713, pp.138359~ (2020), Elsevier BV[DOI]
- Yuelong Huang, "Evaluation of the corrosion resistance of anodized aluminum 6061 using electrochemical impedance spectroscopy (EIS)", Corrosion Science, 50(12), pp.3569~3575 (2008), Elsevier BV[DOI]
- Yu Zuo, "The influences of sealing methods on corrosion behavior of anodized aluminum alloys in NaCl solutions", Surface and Coatings Technology, 166(2-3), pp.237~242 (2003), Elsevier BV[DOI]
- Maryam Mehdizade, "Investigation of anodizing time and pulse voltage modes on the corrosion behavior of nanostructured anodic layer in commercial pure aluminum", Surface and Coatings Technology, 358, pp.741~752 (2019), Elsevier BV[DOI]
- Junghoon Lee, "Oil‐Impregnated Nanoporous Oxide Layer for Corrosion Protection with Self‐Healing", Advanced Functional Materials, 27(15) (2017), Wiley[DOI]
- Libang Feng, "Superhydrophobic aluminum alloy surface: Fabrication, structure, and corrosion resistance", Colloids and Surfaces A: Physicochemical and Engineering Aspects, 441, pp.319~325 (2014), Elsevier BV[DOI]
- Małgorzata Norek, "Ethanol influence on arrangement and geometrical parameters of aluminum concaves prepared in a modified hard anodization for fabrication of highly ordered nanoporous alumina", Journal of Electroanalytical Chemistry, 750, pp.79~88 (2015), Elsevier BV[DOI]
- Gen-Xiang Xiang, "Fabrication of modifier-free superhydrophobic surfaces with anti-icing and self-cleaning properties on Ti substrate by anodization method", Microelectronic Engineering, 233, pp.111430~ (2020), Elsevier BV[DOI]
- Jie Zang, "Fabrication of superhydrophobic surface on aluminum alloy 6061 by a facile and effective anodic oxidation method", Surface and Coatings Technology, 380, pp.125078~ (2019), Elsevier BV[DOI]
- Chanyoung Jeong, "Single-Step Direct Fabrication of Pillar-on-Pore Hybrid Nanostructures in Anodizing Aluminum for Superior Superhydrophobic Efficiency", ACS Applied Materials & Interfaces, 4(2), pp.842~848 (2012), American Chemical Society (ACS)[DOI]
- M.A. Hormozi, "A Facile Method for Fabrication of Hybrid Hydrophobic-Hydrophilic Surfaces on Anodized Aluminum Template by Electrophoretic Deposition", Thin Solid Films, 724, pp.138597~ (2021), Elsevier BV[DOI]
- Hirotaka Sakaue, "Hydrophobic monolayer coating on anodized aluminum pressure-sensitive paint", Sensors and Actuators B: Chemical, 119(2), pp.504~511 (2006), Elsevier BV[DOI]
- Z. Wu, "A Study of Anodization Process during Pore Formation in Nanoporous Alumina Templates", Journal of The Electrochemical Society, 154(1), pp.E8~ (2007), The Electrochemical Society[DOI]
- Chanyoung Jeong, "A Study on Functional Hydrophobic Stainless Steel 316L Using Single-Step Anodization and a Self-Assembled Monolayer Coating to Improve Corrosion Resistance", Coatings, 12(3), pp.395~ (2022), MDPI AG[DOI]
- Woo Lee, "Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures", Chemical Reviews, 114(15), pp.7487~7556 (2014), American Chemical Society (ACS)[DOI]