다양한 형상의 패시브 마이크로 믹서의 혼합 성능 연구
A Study on the Mixing Performance of Passive Micromixers in Various Shapes
6
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A micromixer is a component of a lab-on-a-chip or microfluidic device that mixes two or more chemicals together. The purpose of this study is to assess the performance of passive micromixer of various shapes. Six shapes of micromixers compared mixing performance. Three dimensional modeling was carried out to have the same hydraulic diameter. The commercial code, ANSYS Fluent, was used to simulate the internal mixing flow. A numerical analysis method is described in detail in this paper. The performance of the micromixer was compared with the mixing index and pressure drop. Consequently, the CDM-8T shape showed reasonable mixing performance and relatively low pressure drop.
Abstract
A micromixer is a component of a lab-on-a-chip or microfluidic device that mixes two or more chemicals together. The purpose of this study is to assess the performance of passive micromixer of various shapes. Six shapes of micromixers compared mixing performance. Three dimensional modeling was carried out to have the same hydraulic diameter. The commercial code, ANSYS Fluent, was used to simulate the internal mixing flow. A numerical analysis method is described in detail in this paper. The performance of the micromixer was compared with the mixing index and pressure drop. Consequently, the CDM-8T shape showed reasonable mixing performance and relatively low pressure drop.
참고문헌 (10)
- N. T. Nguyen, "Micromixers-a review", J. Micromech. Microeng, 15, pp.R1~R16 (2005)[DOI]
- A. D. Strook, "Chaotic mixer for microchannels", Science, 295, pp.647~651 (2002)[DOI]
- R. H. Lui, "Passive mixing in a three-dimensional serpentine microchannel", J. Microeletromech. System, 9, pp.190~197 (2000)[DOI]
- J. T. Yang, "A chaotic micromixer modulated by constructive vortex agitation", J. Micromech. Microeng, 17, pp.2084~2092 (2007)[DOI]
- X. Fu, "Research on staggered oriented ridge static micromixers", Sensor and Actuators B, 114, pp.618~624 (2005)
- J. Aubin, "Design of micromixers using CFD modelling", Chemical Eng. Sci., 60, pp.2503~2513 (2005)[DOI]
- C. K. Kim, "Optimal Design of Groove Shape on Passive Micro-mixer using Design of Experiment Technique", Proc. IMechE Part E: J. Process Mechanical Engineering, 231(4), pp.880~887 (2016)
- Y. Su, "A Numerical Study on Liquid Mixing in Multichannel Micromixers", Industrial & Engineering Chemistry Research, 53, pp.390~401 (2014)[DOI]
- C. Y. Cheong, "A Study on the Diagnosis of Tool Wear Using Cutting Force Moving Average for Turning Operations", Jol. of Korean Soc. of Mechanical Technology, 11(5), pp.45~52 (2009)
- 이세진, "3축 스테이지의 자동 용접 작업을 위한 웹카메라 영상 처리 기반의 자연 지표 추출법 개발", 한국기계기술학회지, 15(6), pp.853~860 (2013), 한국기계기술학회[DOI]