절삭유 공급장치용 열교환 필터의 구조적 안정성 평가
Structural Safety Evaluation of Heat Exchanger Filter for Cutting Oil Supplying Device of Machine Tool
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
As the demand for high-speed and high-precision machining increases, the need for cooling and filtering of cutting oil is high. A new concept of coolant heat exchange filter is developed by installing cooling coil through which refrigerant(R410-a) passes through the coolant filtering device. For structural safety evaluation of the heat exchanger filter for cutting oil suppling device of machine tool, thermal stress and vibration analysis were performed using ANSYS program. The results of structural and thermal stress analyses have led to theconclusion that the cooling system has structural stability. From modal analysis, first natural frequency is 12.37 hz and deformation is 22.041 mm. Sixth natural frequency is 26.887 hz and deformation is 25.563 mm.
Abstract
As the demand for high-speed and high-precision machining increases, the need for cooling and filtering of cutting oil is high. A new concept of coolant heat exchange filter is developed by installing cooling coil through which refrigerant(R410-a) passes through the coolant filtering device. For structural safety evaluation of the heat exchanger filter for cutting oil suppling device of machine tool, thermal stress and vibration analysis were performed using ANSYS program. The results of structural and thermal stress analyses have led to theconclusion that the cooling system has structural stability. From modal analysis, first natural frequency is 12.37 hz and deformation is 22.041 mm. Sixth natural frequency is 26.887 hz and deformation is 25.563 mm.
참고문헌 (6)
- 김중선, "칩 처리가 포함된 절삭유", 폐유 분리 및 냉각 시스템 개발, 2017, pp.16(3), 16~23[DOI]
- J. H. Ha, "A Study on the Vibration Analysis of the Filtering Suction Chamber for an ECO Vacuum Filtering System", Journal of Korea Society of Precision Engineering Conference Proceedings, pp.484~ (2016)
- B. H. Kim, "A Study on the Cooling Characteristics of Heat Exchanger Filter for Cutting Oil Suppling Device", Proceeding of KSMT 2018 Spring Annual Meeting, pp.71~ (2018)
- 이재동, "콘크리트 펌프카용 구동 유압실린더에 대한 해석적 연구", 한국기계기술학회지, 19(5), pp.735~741 (2017), 한국기계기술학회[DOI]
- 이병호, "경량화를 위한 전기자동차 로터 샤프트의 구조해석에 관한 연구", 한국기계기술학회지, 20(2), pp.154~159 (2018), 한국기계기술학회[DOI]
- K. N. Song, "Designing a PHE and Evaluation of High-temperature Structural Integrity on Its Small-scale Prototype", Proceedings of the KSME Spring Conference, pp.386~391 (2011)