드릴가공 냉각효율에 관한 고압 절삭유 공급조건 해석
Analysis of High-pressure Coolant Supply Conditions on Cooling Efficiency of Drilling Process
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Cutting tools tend to wear gradually with progressing of machining process due to extremely high surface loads and temperature from the relative motions between tool and workpiece. Especially, the high cutting temperature is a dominant factor in the relation to tool life. High-pressure coolant has been reported as an effective method to prevent the severe wear from cutting temperature. This research investigates efficient supplying conditions of high-pressure coolant with the CFD results from a internal-flush drilling process. The flow rate of coolant is increased drastically up to three times under 70 bar compared to conventional way.
Abstract
Cutting tools tend to wear gradually with progressing of machining process due to extremely high surface loads and temperature from the relative motions between tool and workpiece. Especially, the high cutting temperature is a dominant factor in the relation to tool life. High-pressure coolant has been reported as an effective method to prevent the severe wear from cutting temperature. This research investigates efficient supplying conditions of high-pressure coolant with the CFD results from a internal-flush drilling process. The flow rate of coolant is increased drastically up to three times under 70 bar compared to conventional way.
참고문헌 (6)
- 이이선, "기계구조용 탄소강(SM20C)의 절삭력에 관한 연구", 한국기계기술학회지, 18(4), pp.503~510 (2016), 한국기계기술학회
- 김형철, "마그네틱실 설계변수에 따른 STS630의 홈가공 절삭력 변화", 한국기계기술학회지, 18(4), pp.517~522 (2016), 한국기계기술학회
- M. J. Bermingham, "Advantages of milling and drilling Ti-6Al-4V components with highpressure coolant", Int J. of Adv Manuf Technol., 72, pp.77~88 (2014)
- Rosemar B. da Silvaa, "Tool life and wear mechanisms in high speed machining of Ti-6Al-4V alloy with PCD tools under various coolant pressures", J. Mater. Process. Technol, 213(8), pp.1459~1464 (2013)
- A. O. Tay, "Using the finite element method to determine temperature distributions in orthogonal machining", Proc lnstn Mech Engrs, 188, pp.55~74 (1974)
- D. C Choi, "Study on the Flow Characteristics in Suspension Polymerization Reactors with CFD", Theories and Applications of Chem. Eng., 8(2), pp.5034~5037 (2002)