지그 적용을 통한 복합재료 가공 최적화에 관한 연구
A Study on Optimization of Composite Material Processing Through Jig Application
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The most important factor in the processing of composite materials is the creation of burrs. In order to minimize the generation of burrs, the preceding researchers changed the shape and processing conditions of the tool. The developed composite material using carbon and aramid fibers has limitations in reducing the formation of burrs. In this study, in order to solve this problem, by applying a jig under the test piece during drilling, it was possible to perform high-quality hole processing with minimal burr generation.
Abstract
The most important factor in the processing of composite materials is the creation of burrs. In order to minimize the generation of burrs, the preceding researchers changed the shape and processing conditions of the tool. The developed composite material using carbon and aramid fibers has limitations in reducing the formation of burrs. In this study, in order to solve this problem, by applying a jig under the test piece during drilling, it was possible to perform high-quality hole processing with minimal burr generation.
참고문헌 (7)
- Abrate. S., "Macnining of composite materials. Part 1: Traditional Methods", Composites Manufacturing, 3(2), pp.75~83 (1992)
- K. Sakuma, "Tool Wear in cutting Glass-Fiber reinforced plastics(The relationship between fiber orientation and tool wear)", Bulletin of JSME, 26(218), pp.1420~1427 (1983)
- S. Shyha, "Effect of laminte configuration and feed rate on cutting performance when drilling hole ing carbon fiber reinforced plastic composite", J. Mat. Process. Technol, 201, pp.1023~1034 (2010)
- C. Reugg, "Composite propeller shaft design and optimization, Advance in composite material", Processings of ICCM 3, 2(6), pp.17~26 (2013)
- J. H. Lee, "Study on Burr Formation and Tool Wear in Drilling CFRP and Its Hybrid Composites", Journal of Appl. Sci, 11, pp.384~ (2021)
- Saoudi J., "Analytical and Enxperimental Investigation of the delamination during drilling of composite structure", J. Compos. Mater, 52, pp.1281~1294 (2018)
- 이정환, "복합재료 드릴가공 온도 변화에 따른 절삭특성", 한국기계기술학회지, 21(6), pp.1193~1197 (2019), 한국기계기술학회[DOI]