선박 디젤엔진용 로터 캡의 구조해석 연구
Study on Structural Analysis of Roto Cap for Diesel Engine of Ship
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Roto cap is usually used to diesel engine, especially, big-sized diesel engine such as ship, power plant and so on. Intake and exhaust valves are essential parts of diesel engine and thus roto cap is one of the most important parts of intake and exhaust valves. Roto cap consists of body, disc spring, spring & steel ball, retainer and stop ring. In this study, the body and disc spring in parts of roto cap were simulated using static structural analysis. The purpose of this study is to achieve the data for designing and improving the roto cap. As the results, the body of roto cap showed safety factor of 6.3 in even 2 times of 1370N(target load) and the disc spring showed safety factor of 4.9 in 2370N load.
Abstract
Roto cap is usually used to diesel engine, especially, big-sized diesel engine such as ship, power plant and so on. Intake and exhaust valves are essential parts of diesel engine and thus roto cap is one of the most important parts of intake and exhaust valves. Roto cap consists of body, disc spring, spring & steel ball, retainer and stop ring. In this study, the body and disc spring in parts of roto cap were simulated using static structural analysis. The purpose of this study is to achieve the data for designing and improving the roto cap. As the results, the body of roto cap showed safety factor of 6.3 in even 2 times of 1370N(target load) and the disc spring showed safety factor of 4.9 in 2370N load.
참고문헌 (13)
- 김제영, "디젤 엔진용 EGR Cooler의 수치 해석적 성능평가", 한국기계기술학회지, 15(4), pp.569~575 (2013), 한국기계기술학회[DOI]
- 양철호, "신뢰성 설계를 위한 엔진 실린더 블록과 메인 보어의 유한요소해석", 한국자동차공학회 논문집, 13(4), pp.39~48 (2005), 한국자동차공학회
- 황성원, "수치해석을 이용한 디젤엔진용 오일 냉각기 핀 형상에 따른 연구", 한국기계기술학회지, 21(1), pp.1~7 (2019), 한국기계기술학회[DOI]
- 이재옥, "대형 디젤엔진의 구조응력해석 및 베어링 캡의 최적설계", 대한기계학회논문집 A, 32(5), pp.402~410 (2008), 대한기계학회
- 이돈출, "선박용 4행정 디젤엔진의 크랭크축 강도해석에 관한 연구", 한국마린엔지니어링학회지, 30(4), pp.359~368 (2006), 한국마린엔지니어링학회
- 심한섭, "선박용 수냉식 디젤엔진의 개발 및 성능평가", 한국기계가공학회지, 15(6), pp.58~63 (2016), 한국기계가공학회[DOI]
- 황기웅, "유동해석을 통한 선박용 디젤엔진(LDCL JWCS)의 3-Way Valve 형상 설계", 대한기계학회논문집 A, 41(11), pp.1077~1084 (2017), 대한기계학회
- 양수영, "선박용 중형디젤엔진 공기시동모터의 유동특성에 관한 수치해석", 한국마린엔지니어링학회지, 33(4), pp.545~552 (2009), 한국마린엔지니어링학회
- 장세현, "2행정 디젤 기관의 배기밸브 재생에 관한 연구", 한국마린엔지니어링학회지, 41(6), pp.489~494 (2017), 한국마린엔지니어링학회[DOI]
- S. C. Kim, "A Numerical Analysis for Fuel Consumption by Improvement of Intake", Exhaust Valve Timing in a Common Rail Diesel Engine for a Generator, 2017, pp.26(2), 32~38
- Hyundai Generating Sets PROJECT GUIDE, "HIMSEN H21", 32 for Marine
- S. G. Yun, "Mechanics of Materials" (2018), Autotech