블래더 프레스 성형 시스템 개발 연구
A Study on Development of Bladder Press Forming System
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, research development about a bladder press forming system has been carried out for sheet metal forming. The bladder press forming system consists largely of three units as follows forming process unit, driving unit and hydraulic power unit including bladder. Structural analysis of frame of total system by the ANSYS program, flow analysis of bladder by CFX version 14 and hydraulic circuit analysis by AMESim were carried for basic design of bladder press forming system. We can get a good forming results from bladder press system. Developed bladder press forming system will be largely used in aircraft manufacturing industry field.
Abstract
In this paper, research development about a bladder press forming system has been carried out for sheet metal forming. The bladder press forming system consists largely of three units as follows forming process unit, driving unit and hydraulic power unit including bladder. Structural analysis of frame of total system by the ANSYS program, flow analysis of bladder by CFX version 14 and hydraulic circuit analysis by AMESim were carried for basic design of bladder press forming system. We can get a good forming results from bladder press system. Developed bladder press forming system will be largely used in aircraft manufacturing industry field.
참고문헌 (5)
- S. S. Lim, "Fabrication of Metallic Micro-Channel Plate for Heat Exchanger and Fuel Cell by Rubber Pad Forming", Proceedings of The Korean Society for Technology of Plasticity 2011 Spring Conference, pp.59~62 (2011)
- Dong-Won Jung, "Effective Process Design and Robust Manufacturing for Hydroformed Parts", Journal of Mechanical Science and Technology, 21(2), pp.225~233 (2007), 대한기계학회
- R. M. Do, "A Study on Sheet Thin Plate Press-Formed Skills about Weight reduction of Vehicle", Proceedings of The KSPE 2012Spring Conference, pp.1229~1230 (2012)
- 조재웅, "CNG버스의 연료탱크 설치방법에 따른 응력과 유동해석", 한국기계기술학회지, 13(4), pp.15~22 (2011), 한국기계기술학회
- 전윤식, "딥 드로잉 자동화를 위한 유압회로 설계", 한국기계기술학회지, 14(3), pp.67~75 (2012), 한국기계기술학회[DOI]