사각 수분류에 의한 가열면상에서의 열전달 특성에 대한 실험적 연구
Experimental Study of Heat Transfer Characteristics on a Heated Flat Surface by Rectangular Water Jet
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Jet impingement heat transfer is a very effective technique for exchanging high heat fluxs between a heated plate and a fluid. The purpose of this study is to investigate the heat transfer characteristics of a rectangular free water jet normally or obliquely impinging onto a flat plate. The water jet issued from a rectangular slot nozzle with a cross section of 1.5mm⨉40mm. The mean velocities of nozzle exit were varied from 1.5m/s to 6.1m/s. The Reynolds number range based on the nozzle gap and the meanvelocity was 2200∼8800. Various impingement angles between the vertical rectangular water jet and the inclined flat surface were investigated : 90°, 70°, 60° and 50°. The Nusselt number is high atthe impingement line, and decreases with departures from it. The stagnation Nusselt numbers were compared to predictions of several correlations proposed by other researchers. The locations of the peakNusselt numbers do not coincide with the geometric center of the rectangular jet on the surface.
Abstract
Jet impingement heat transfer is a very effective technique for exchanging high heat fluxs between a heated plate and a fluid. The purpose of this study is to investigate the heat transfer characteristics of a rectangular free water jet normally or obliquely impinging onto a flat plate. The water jet issued from a rectangular slot nozzle with a cross section of 1.5mm⨉40mm. The mean velocities of nozzle exit were varied from 1.5m/s to 6.1m/s. The Reynolds number range based on the nozzle gap and the meanvelocity was 2200∼8800. Various impingement angles between the vertical rectangular water jet and the inclined flat surface were investigated : 90°, 70°, 60° and 50°. The Nusselt number is high atthe impingement line, and decreases with departures from it. The stagnation Nusselt numbers were compared to predictions of several correlations proposed by other researchers. The locations of the peakNusselt numbers do not coincide with the geometric center of the rectangular jet on the surface.
참고문헌 (18)
- H. Alleborn, "Progress in coating theory", Thermal Science, 5(1), pp.131~152 (2001)
- H. Serizawa, "Distribution of heat transfer coefficient of an impinging 2-dimensional free jet on a oblique flat surface", Transactions of the Japan Society of Mechanical Engineer B, 66(650), pp.2669~2674 (2000)
- S. J. Chen, "Spray and jet cooling in steel rolling", Int. Journal of heat and Fluid Flow, 13(4), pp.358~369 (1992)
- N. Hatta, "A numerical study on cooling process of hot steel plates by a water curtain", ISIJ International, 29(8), pp.673~679 (1989)
- N. Hatta, "Numerical modeling for cooling of a moving hot plate by a laminar water curtain", ISIJ International, 29(11), pp.919~925 (1989)
- D. T. Vader, "A method for measuring steady local heat transfer to a impinging liquid jet", Experimental Thermal and Fluid Scaience, 4(0), pp.1~11 (1991)
- C. Burmeister, "Convective Heat Transfer", pp.186~196 (1993), J. Wiley
- H. L. Evans, "Mass transfer through laminar boundary layers-further similar solutions to the B-equation for the B=0", Int. Journal of Heat and Mass Transfer, 5, pp.35~57 (1962)
- L. M. Milne-Thomson, "Theoretical Hydrodynamics", pp.279~289 (1955), Macmillan
- A. Y. Tong, "On the Impingement heat transfer of an oblique free surface plane jet", Int. Journal of Heat and Mass Transfer, 46, pp.2077~2085 (2003)
- D. T Vader, "Local convective heat transfer from a heated surface to an impinging planar jet of water", Int. Journal of Heat and Mass Transfer, 34(3), pp.611~623 (1991)
- D. C. McMurray, "Influence of impinging jet variables on local heat transfer coefficients along a flat surface with constant heat flux", Proceedings of the 3rd International Heat Transfer Conference, 2, pp.292~299 (1966)
- D. H. Wolf, "Local convective heat transfer from a heated surface to a planar jet of water with a nonuniform velocity profile", ASME Journal of Heat Transfer, 112, pp.899~905 (1990)
- D. H. Wolf, "Turbulence dissipation in a free surface jet of water and its effect on local impingement heat transfer from a heated surface part 2-local heat transfer", ASME Journal of Heat Transfer, 117, pp.95~103 (1995)
- S. Innada, "A Study of the laminar flow heat transfer between a 2-dimensional water jet and a flat surface with constant heat flux", Bulletin of the JSME, 24, pp.1803~1810 (1981)
- Y. C. Chen, "Theoretical study on impingement heat transfer with single-phase free surface slot jets", Int. Journal of Heat and Mass Transfer, 48, pp.3381~3386 (2005)
- G. K. Batchelor, "An Introduction to Fluid Dynamics", pp.393~ (1967), Cambridge University Press
- A. H. Beitelmal, "The effect of inclination on the heat transfer between a flat surface and an impinging 2-dimensional air jet", Int. Journal of Heat and Fluid Flow, 21, pp.156~163 (2000)